| 目次 |
| 综 述 |
| 陶瓷光固化3D打印技术研究进展 ----------------------------------------------------------------------------------------刘 雨,陈张伟(1) |
| 高性能梯度功能材料激光增材制造研究现状及展望 ----------------------------------------------------------------------------------------崔 雪,张 松,张春华,吴臣亮,王 强,董世运(13) |
| 航空发动机涡轮叶片超温服役损伤的研究进展 ----------------------------------------------------------------------------------------赵云松,张 迈,郭小童,郭媛媛,赵 昊,刘砚飞,姜 华,张 剑,骆宇时(24) |
| 金属相二硫化钼在能量储存与转化中的应用进展 ----------------------------------------------------------------------------------------徐晨曦,胡安俊,舒朝著,龙剑平(34) |
| 高比能超级电容器：电极材料、电解质和能量密度限制原理 ----------------------------------------------------------------------------------------郑俊生,秦 楠,郭 鑫,金黎明,Zheng Jim P(47) |
| 碳点在生物诊疗中的应用 ----------------------------------------------------------------------------------------邹 漫,陈叶青(59) |
| 研究论文 |
| CeO2-Ag/AgBr复合微球的合成及光催化性能 ----------------------------------------------------------------------------------------李鹏鹏,苏 复,顾正桂(69) |
| 羧甲基纤维素-石墨烯复合气凝胶的制备及吸附研究 ----------------------------------------------------------------------------------------许文龙,陈 爽,张津红,刘会娥,朱佳梦,刁 帅,于安然(77) |
| 聚酯无纺布支撑CaAlg/CaSiO3@SiO2的制备及其对Pb2+的吸附 ----------------------------------------------------------------------------------------马开心,刘 琪,白 甜,路子杰,于黎楠,莫 琛,赵孔银,刘 亚(86) |
| Ta掺杂Na0.5Bi4.5Ti4O15陶瓷的显微结构和电性能 ----------------------------------------------------------------------------------------陈丹玲,黄志强,何新华(93) |
| Mg22Y2Ni10Cu2储氢合金的放氢性能 ----------------------------------------------------------------------------------------孙 昊,贾凯波,赵凤光,张羊换,任慧平(100) |
| 压缩预变形对7050铝合金非等温时效析出行为的影响 ----------------------------------------------------------------------------------------冯 昊,符殿宝,程佳乐,唐寅林,陈俊锋,王 晨,邹林池(107) |
| 热挤压态Ni-Co-Cr基粉末高温合金热加工行为 ----------------------------------------------------------------------------------------李慧中,杨 雷,王 岩,谭 钢,黄钲钦,刘敏学(115) |
| 基于单分散逐液滴雾化法制备锡合金微细球形金属粉末 ----------------------------------------------------------------------------------------董 伟,孟 瑶,许富民,韩 阳,王延洋,陈 楷(124) |
| 热处理对Mg97.5Gd1.9Zn0.6合金组织与力学性能的影响 ----------------------------------------------------------------------------------------甄 睿,方信贤,皮锦红,许恒源,吴 震(132) |
| 喷丸强度和表面覆盖率对TC4钛合金室温疲劳性能的影响 ----------------------------------------------------------------------------------------王 欣,许春玲,李臻熙,裴传虎,汤智慧(138) |
| 成型工艺对多孔PI材料摩擦学及力学性能的影响 ----------------------------------------------------------------------------------------叶锦宗,李锦棒,周宁宁,曹 均,卿 涛,蒋世宇,于爱兵(144) |
| E-玻纤/环氧树脂预浸料固化动力学及其动态热力学性能 ----------------------------------------------------------------------------------------张成林,董抒华,李丽君,田龙雨,谭洪生(152) |
| 复合材料层压板分层缺陷相控阵超声检测参数优化方法 ----------------------------------------------------------------------------------------曹弘毅,姜明顺,马蒙源,张法业,张 雷,隋青美,贾 磊(158) |
| 铝合金-BFRP粘接接头的服役高温老化力学性能及失效预测 ----------------------------------------------------------------------------------------栾建泽,那景新,谭 伟,慕文龙,申 浩,秦国锋(166) |
| CONTENTS |
| REVIEW |
| Research progress in photopolymerization-based 3D printing technology of ceramics ----------------------------------------------------------------------------------------LIU Yu,CHEN Zhang-wei(1) |
| Research status and prospect of laser additive manufacturing technology for high performance gradient functional materials ----------------------------------------------------------------------------------------CUI Xue,ZHANG Song,ZHANG Chun-hua,WU Chen-liang,WANG Qiang,DONG Shi-yun(13) |
| Recent progress in service induced degradation of turbine blades of aeroengine due to overheating ----------------------------------------------------------------------------------------ZHAO Yun-song,ZHANG Mai,GUO Xiao-tong,GUO Yuan-yuan,ZHAO Hao, LIU Yan-fei,JIANG Hua,ZHANG Jian,LUO Yu-shi(24) |
| Application progress of metallic phase of molybdenum disulfide for energy storage and conversion ---------------------------------------------------------------------------------------- XU Chen-xi,HU An-jun,SHU Chao-zhu,LONG Jian-ping(34) |
| High energy density supercapacitors:electrode material,electrolyte and energy density limitation principle ----------------------------------------------------------------------------------------ZHENG Jun-sheng,QIN Nan,GUO Xin,JIN Li-ming,Jim P Zheng(47) |
| Application of carbon dots in biological diagnosis and treatment ----------------------------------------------------------------------------------------ZOU Man,CHEN Ye-qing(59) |
| RESEARCH ARTICLE |
| Synthesis and visible light photocatalytic performance of CeO2-Ag/AgBr composite microspheres ----------------------------------------------------------------------------------------LI Peng-peng,SU Fu,GU Zheng-gui(69) |
| Preparation and adsorption of carboxymethyl cellulose graphene composite aerogels ----------------------------------------------------------------------------------------XU Wen-long,CHEN Shuang,ZHANG Jin-hong,LIU Hui-e, ZHU Jia-meng,DIAO Shuai,YU An-ran(77) |
| Preparation of polyester nonwovens supported CaAlg/CaSiO3@SiO2 and its adsorption for Pb2+ ----------------------------------------------------------------------------------------MA Kai-xin,LIU Qi,BAI Tian,LU Zi-jie,YU Li-nan,MO Chen,ZHAO Kong-yin,LIU Ya(86) |
| Microstructure and electrical properties of Ta-doped Na0.5Bi4.5Ti4O15 ceramics ----------------------------------------------------------------------------------------CHEN Dan-ling,HUANG Zhi-qiang,HE Xin-hua(93) |
| Dehydrogenation properties of Mg22Y2Ni10Cu2 hydrogen storage alloy ----------------------------------------------------------------------------------------SUN Hao,JIA Kai-bo,ZHAO Feng-guang,ZHANG Yang-huan,REN Hui-ping(100) |
| Effect of compressed pre-deformation on precipitation behavior of 7050 aluminum alloy during non-isothermal aging ----------------------------------------------------------------------------------------FENG Hao,FU Dian-bao,CHENG Jia-le,TANG Yin-lin,CHEN Jun-feng,WANG Chen,ZOU Lin-chi(107) |
| Hot working behavior of hot-extruded Ni-Co-Cr-based powder metallurgy superalloy ----------------------------------------------------------------------------------------LI Hui-zhong,YANG Lei,WANG Yan,TAN Gang,HUANG Zheng-qin,LIU Min-xue(115) |
| Preparation of tin alloys spherical fine metal powders by centrifugal atomization based on mono-sized droplets ----------------------------------------------------------------------------------------DONG Wei,MENG Yao,XU Fu-min,HAN Yang,WANG Yan-yang,CHEN Kai(124) |
| Effect of heat treatment on microstructure and mechanical properties of Mg97.5Gd1.9Zn0.6 alloy ----------------------------------------------------------------------------------------ZHEN Rui,FANG Xin-xian,PI Jin-hong,XU Heng-yuan,WU Zhen(132) |
| Effect of shot peening intensity and surface coverage on room-temperature fatigue property of TC4 titanium alloy ----------------------------------------------------------------------------------------WANG Xin,XU Chun-ling,LI Zhen-xi,PEI Chuan-hu,TANG Zhi-hui(138) |
| Effect of molding process on tribology and mechanical properties of porous PI materials ----------------------------------------------------------------------------------------YE Jin-zong,LI Jin-bang,ZHOU Ning-ning,CAO Jun,QING Tao,JIANG Shi-yu,YU Ai-bing(144) |
| Curing kinetic and dynamic thermodynamic properties of E-glass fiber/epoxy resin prepreg ----------------------------------------------------------------------------------------ZHANG Cheng-lin,DONG Shu-hua,LI Li-jun,TIAN Long-yu,TAN Hong-sheng(152) |
| Parameter optimization method for delamination defects detection of composite laminate using phased array ultrasonic ----------------------------------------------------------------------------------------CAO Hong-yi,JIANG Ming-shun,MA Meng-yuan,ZHANG Fa-ye,ZHANG Lei,SUI Qing-mei,JIA Lei(158) |
| Mechanical properties and failure prediction of aluminum alloy-BFRP bonded joints under service high temperature aging ----------------------------------------------------------------------------------------LUAN Jian-ze,NA Jing-xin,TAN Wei,MU Wen-long,SHEN Hao,QIN Guo-feng(166) |