目次 |
综 述 |
难熔高熵合金性能调控与增材制造 ----------------------------------------------------------------------------------------孙 博, 夏 铭, 张志彬, 梁秀兵, 沈宝龙(1) |
金属镁电化学腐蚀阳极析氢行为研究进展 ----------------------------------------------------------------------------------------刘玉项, 朱 胜, 韩冰源(17) |
TiO2薄膜型气敏传感器研究进展
----------------------------------------------------------------------------------------金嘉炜, 李国臣, 张 冶, 李公义, 楚增勇(28) |
锂离子印迹材料选择性提取锂的研究进展 ----------------------------------------------------------------------------------------梁 琦, 赵 宏, 刘伟峰, 张二辉, 闫 光, 杨永珍, 刘旭光(39) |
民用航空发动机树脂基复合材料应用进展 ----------------------------------------------------------------------------------------马绪强, 苏正涛(48) |
研究论文 |
航天器用氰酸酯基胶黏剂的固化模型及固化工艺设计 ----------------------------------------------------------------------------------------何端鹏, 高 鸿, 邢 焰, 李 岩, 王向轲(60) |
缝合密度对缝合/VARI成型复合材料力学性能的影响 ----------------------------------------------------------------------------------------徐学宏, 郑义珠, 陈吉平, 宁 博(68) |
国产高性能碳纤维表征分析及复合材料力学性能研究 ----------------------------------------------------------------------------------------李国丽, 彭公秋, 钟翔屿(74) |
石墨烯改性碳纤维树脂基复合材料的制备和性能评价 ----------------------------------------------------------------------------------------陈宇, 张代军, 李 军, 温嘉轩, 陈祥宝(82) |
二次注射成型光学制件厚度截面的残余应力分析 ----------------------------------------------------------------------------------------葛 勇, 王博伦, 相 宁, 王 韬, 孙琦伟, 颜 悦(88) |
非定向有机玻璃拉伸断口形貌与拉伸温度相关性分析 ----------------------------------------------------------------------------------------熊伟腾, 王云英, 范金娟, 肖淑华(96) |
扫描策略对激光选区熔化成型18Ni300马氏体时效钢打印质量和性能的影响 ----------------------------------------------------------------------------------------张佳琪, 王敏杰, 刘建业, 牛留辉, 王金海(105) |
小角度晶界对DD5镍基单晶高温合金中、高温条件下力学性能的影响 ----------------------------------------------------------------------------------------秦健朝, 崔仁杰, 黄朝晖(114) |
晶界工程处理对Inconel 690TT合金微动磨损行为的影响 ----------------------------------------------------------------------------------------韩永明, 韩俊玲, 辛 龙, 刘廷光, 陆永浩, 庄子哲雄(123) |
AlNP/Al复合材料与6061Al低温连接组织演变机理及力学性能 ----------------------------------------------------------------------------------------林盼盼, 马 典, 李昊岳, 王子鸣, 何 鹏, 林铁松, 龙伟民(133) |
TC11钛合金表面保护性摩擦氧化层的形成及作用 ----------------------------------------------------------------------------------------李新星, 王红侠, 施剑峰, 韩伯群(141) |
硅酸钙及硅酸钠浓度对钛合金表面生物活性涂层的影响 ----------------------------------------------------------------------------------------何代华, 朱 威, 刘 翔, 刘 平(148) |
Mg2+掺杂对Li1.2Mn0.6Ni0.2O2正极材料性能的影响 ----------------------------------------------------------------------------------------陈德鑫, 李智敏, 李高锋, 张茂林, 张东岩, 闫养希(157) |
TiO2基底对MoO3/TiO2复合薄膜电致变色性能的影响 ----------------------------------------------------------------------------------------成 明, 杨继凯, 郝志旭, 亢嘉琪, 王 新, 王国政, 宦克为(163) |
TEMPO功能化锆基MOFs的合成及醇催化氧化性能 ----------------------------------------------------------------------------------------庄金亮, 刘湘粤, 杜 嬛(169) |
基于数字体相关方法的3D打印材料内部变形测量 ----------------------------------------------------------------------------------------刘 帅, 郭广平, 郝文峰, 杨 洋, 张 悦, 陈子木(176) |
CONTENTS |
REVIEW |
Property tuning and additive manufacturing of refractory high-entropy alloys ----------------------------------------------------------------------------------------SUN Bo, XIA Ming, ZHANG Zhi-bin, LIANG Xiu-bing, SHEN Bao-long(1) |
Research progress in anodic hydrogen evolution of magnesium electrochemistry corrosion ----------------------------------------------------------------------------------------LIU Yu-xiang, ZHU Sheng, HAN Bing-yuan(17) |
Research progress in TiO2 thin film gas sensor ----------------------------------------------------------------------------------------JIN Jia-wei, LI Guo-chen, ZHANG Ye, LI Gong-yi, CHU Zeng-yong(28) |
Research progress in lithium ion imprinted materials for selectively extracting lithium --------------------------------------------------------------------LIANG Qi, ZHAO Hong, LIU Wei-feng, ZHANG Er-hui, YAN Guang, YANG Yong-zhen, LIU Xu-guang(39) |
Application progress of polymer matrix composites in civil turbofan aeroengine ----------------------------------------------------------------------------------------MA Xu-qiang, SU Zheng-tao(48) |
RESEARCH ARTICLE |
Curing model and process parameters of cyanate ester resin based adhesives for spacecraft ----------------------------------------------------------------------------------------HE Duan-peng, GAO Hong, XING Yan, LI Yan, WANG Xiang-ke(60) |
Effect of stitch density on mechanical properties of stitched composites manufactured by VARI process ----------------------------------------------------------------------------------------XU Xue-hong, ZHENG Yi-zhu, CHEN Ji-ping, NING Bo(68) |
Characterization of domestic high performance carbon fibers and mechanical properties of carbon fibers reinforced matrix composites ----------------------------------------------------------------------------------------LI Guo-li, PENG Gong-qiu, ZHONG Xiang-yu(74) |
Preparation and performance evaluation of carbon fiber/epoxy composites modified with graphene prepregs ----------------------------------------------------------------------------------------CHEN Yu, ZHANG Dai-jun, LI Jun, WEN Jia-xuan, CHEN Xiang-bao(82) |
Residual stress analysis in cross section of optical parts by co-injection molding ----------------------------------------------------------------------------------------GE Yong, WANG Bo-lun, XIANG Ning, WANG Tao, SUN Qi-wei, YAN Yue(88) |
Correlation analysis between tensile fracture morphology and tensile temperature of non-oriented acrylic sheet ----------------------------------------------------------------------------------------XIONG Wei-teng, WANG Yun-ying, FAN Jin-juan, XIAO Shu-hua(96) |
Influence of scanning strategy on printing quality and properties of selective laser melted 18Ni300 maraging steel ----------------------------------------------------------------------------------------ZHANG Jia-qi, WANG Min-jie, LIU Jian-ye, NIU Liu-hui, WANG Jin-hai(105) |
Effect of low angle grain boundaries on mechanical properties of DD5 single crystal Ni-base superalloy at medium temperature and high temperature ----------------------------------------------------------------------------------------QIN Jian-chao, CUI Ren-jie, HUANG Zhao-hui(114) |
Effects of grain boundary engineering treatment on fretting wear behavior of Inconel 690TT alloy --------------------------------------------------------------------------------HAN Yong-ming, HAN Jun-ling, XIN Long, LIU Ting-guang, LU Yong-hao, SHOJI Tetsuo(123) |
Microstructure evolution mechanism and mechanical properties of AlNP/Al composites bonded to 6061Al at low temperature ----------------------------------------------------------------------------LIN Pan-pan, MA Dian, LI Hao-yue, WANG Zi-ming, HE Peng, LIN Tie-song, LONG Wei-min(133) |
Formation and function of protective tribo-oxide layers on TC11 titanium alloy surface ----------------------------------------------------------------------------------------LI Xin-xing, WANG Hong-xia, SHI Jian-feng, HAN Bo-qun(141) |
Effects of calcium silicate and sodium silicate concentrations on bioactive coating on titanium alloy ----------------------------------------------------------------------------------------HE Dai-hua, ZHU Wei, LIU Xiang, LIU Ping(148) |
Influence of Mg2+ doping on properties of Li1.2Mn0.6Ni0.2O2 cathode materials -----------------------------------------------------------------------------CHEN De-xin, LI Zhi-min, LI Gao-feng, ZHANG Mao-lin, ZHANG Dong-yan, YAN Yang-xi(157) |
Effect of TiO2 substrate on electrochromic properties of MoO3/TiO2 composite films ---------------------------------------------------------------------CHENG Ming, YANG Ji-kai, HAO Zhi-xu, KANG Jia-qi, WANG Xin, WANG Guo-zheng, HUAN Ke-wei(163) |
Synthesis and alcohol catalytic properties of TEMPO functionalized Zr-based MOFs ----------------------------------------------------------------------------------------ZHUANG Jin-liang, LIU Xiang-yue, DU Xuan(169) |
Internal deformation measurement of 3D printing materials based on digital volume correlation method -------------------------------------------------------------------------------------LIU Shuai, GUO Guang-ping, HAO Wen-feng, YANG Yang, ZHANG Yue, CHEN Zi-mu(176) |