材料工程2020年8期目录

目次
 
复合材料专栏
 
 
激励响应复合材料的4D打印及其应用研究进展
----------------------------------------------------------------------------------------曾成均,刘立武,边文凤,冷劲松,刘彦菊(1)
 
 
航天飞行器热防护系统低密度烧蚀防热材料研究进展
----------------------------------------------------------------------------------------冯志海,师建军,孔 磊,罗丽娟,梁 馨,匡松连(14)
 
 
高分子复合材料在装甲防护领域的研究与应用进展
----------------------------------------------------------------------------------------魏化震,钟蔚华,于 广(25)
 
 
国产高强中模碳纤维及其增强高韧性树脂基复合材料研究进展
----------------------------------------------------------------------------------------包建文,钟翔屿,张代军,彭公秋,李伟东,石峰晖,李 晔,姚 锋,常海峰(33)
 
 
连续纤维增强高性能热塑性树脂基复合材料的制备与应用
----------------------------------------------------------------------------------------肇 研,刘寒松(49)
 
 
三维机织复合材料力学性能研究进展
----------------------------------------------------------------------------------------陈 利,焦 伟,王心淼,刘俊岭(62)
 
 
综 述
 
 
GH4720Li合金中析出相的研究进展
----------------------------------------------------------------------------------------曲敬龙,易出山,陈竞炜,史玉亭,毕中南,杜金辉(73)
 
 
电化学法制备石墨烯的研究进展

----------------------------------------------------------------------------------------高亚辉,尹国杰,张少文,王 璐,孟巧静,李欣栋(84)
 
 
研究论文
 
 
氮/氧共掺杂多孔碳纳米带的可控制备及储能特性
----------------------------------------------------------------------------------------阚 侃,王 珏,付 东,宋美慧,张伟君,张晓臣(101)
 
 
Mn2O3/Fe2O3/少层石墨烯/硫锂硫电池正极材料的制备及其电化学性能
----------------------------------------------------------------------------------------王 楠,齐 新,彭思侃,陈 翔,王 晨,戴圣龙,燕绍九(110)
 
 
Mo元素对LaFe11.5Si1.5磁制冷材料耐腐蚀性能及磁性能的影响
----------------------------------------------------------------------------------------胡 洁,董中奇,沈英明,王 杨,杨俊雅(119)
 
 
TiO2粒径对Al-TiO2-C细化剂组织及细化效果的影响
----------------------------------------------------------------------------------------刘 欢,张瑞英,李金轩,杨 森,闫 晗(126)
 
 
轧制方式对6016铝合金薄板组织和塑性各向异性的影响
----------------------------------------------------------------------------------------段晓鸽,江海涛,米振莉,王丽丽,李 萧(134)
 
 
退火工艺对Zn/AZ31/Zn复合板材界面微观结构及力学性能的影响
----------------------------------------------------------------------------------------许凤光,刘 垚,马文江,张 憬(142)
 
 
Zn对钢/铝异种金属搅拌摩擦焊接头界面组织及性能的影响
----------------------------------------------------------------------------------------张桂源,李于朋,宫文彪,宫明月,崔 恒(149)
 
 
纯钛表面载银微弧氧化陶瓷膜的制备及性能
----------------------------------------------------------------------------------------杜春燕,赵 晖,赵海涛(157)
 
 
AZ91D镁合金表面环境友好直接化学镀镍工艺研究
----------------------------------------------------------------------------------------宿 辉,刘 辉,张春波(163)
 
 
薄壁结构工业CT尺寸测量误差与极限
----------------------------------------------------------------------------------------陈子木,胡正伟,王倩妮,史亦韦(169)
 
 
CONTENTS
 
COMPOSITES COLUMN
 
 
Progress in 4D printing of stimulus-responsive composites and its applications
----------------------------------------------------------------------------------------ZENG Cheng-jun, LIU Li-wu, BIAN Wen-feng, LENG Jin-song, LIU Yan-ju(1)
 
 
Research progress in low-density ablative materials for thermal protection system of aerospace flight vehicles
----------------------------------------------------------------------------------------FENG Zhi-hai, SHI Jian-jun, KONG Lei, LUO Li-juan, LIANG Xin, KUANG Song-lian(14)
 
 
Research and application progress of polymer composites in armor protection
----------------------------------------------------------------------------------------WEI Hua-zhen, ZHONG Wei-hua, YU Guang(25)
 
 
Progress in high strength intermediate modulus carbon fiber and its high toughness resin matrix composites in China
---------------------------------------------------------------------------------------- BAO Jian-wen, ZHONG Xiang-yu, ZHANG Dai-jun, PENG Gong-qiu, LI Wei-dong, SHI Feng-hui, LI Ye, YAO Feng, CHANG Hai-feng(33)
 
 
Preparation and application of continuous fiber reinforced high-performance thermoplastic composites
----------------------------------------------------------------------------------------ZHAO Yan, LIU Han-song(49)
 
 
Research progress on mechanical properties of 3D woven composites
----------------------------------------------------------------------------------------CHEN Li, JIAO Wei, WANG Xin-miao, LIU Jun-ling(62)
 
 
REVIEW
 
 
Research progress of precipitated phase in GH4720Li superalloy
----------------------------------------------------------------------------------------QU Jing-long, YI Chu-shan, CHEN Jing-wei, SHI Yu-ting, BI Zhong-nan, DU Jin-hui(73)
 
 
Research progress in electrochemical preparation of graphene

----------------------------------------------------------------------------------------GAO Ya-hui, YIN Guo-jie, ZHANG Shao-wen, WANG Lu, MENG Qiao-jing, LI Xin-dong(84)
 
 
RESEARCH ARTICLE
 
 
Synthesis and energy storage properties of N/O co-doped porous carbon nanoribbons
----------------------------------------------------------------------------------------KAN Kan, WANG Jue, FU Dong, SONG Mei-hui, ZHANG Wei-jun, ZHANG Xiao-chen(101)
 
 
Synthesis and electrochemical performance of Mn2O3/Fe2O3/few layers graphene/sulfur cathode
for lithium-sulfur batteries

----------------------------------------------------------------------------------------WANG Nan, QI Xin, PENG Si-kan, CHEN Xiang, WANG Chen, DAI Sheng-long, YAN Shao-jiu(110)
 
 
Effect of Mo on corrosion resistance and magnetic property of LaFe11.5Si1.5 magnetic refrigeration materials
----------------------------------------------------------------------------------------HU Jie, DONG Zhong-qi, SHEN Ying-ming, WANG Yang, YANG Jun-ya(119)
 
 
Effect of TiO2 particle size on microstructure and refining effect of Al-TiO2-C refiner
----------------------------------------------------------------------------------------LIU Huan, ZHANG Rui-ying, LI Jin-xuan, YANG Sen, YAN Han(126)
 
 
Effect of rolling mode on microstructure and plastic anisotropy of 6016 aluminum alloy sheet
----------------------------------------------------------------------------------------DUAN Xiao-ge, JIANG Hai-tao, MI Zhen-li, WANG Li-li, LI Xiao(134)
 
 
Effect of annealing process on interfacial microstructure and mechanical properties of Zn/AZ31/Zn clad sheets
----------------------------------------------------------------------------------------XU Feng-guang, LIU Yao, MA Wen-jiang, ZHANG Jing(142)
 
 
Effect of Zn on interfacial microstructure and properties of steel/aluminum dissimilar metal friction stir welded joints
----------------------------------------------------------------------------------------ZHANG Gui-yuan, LI Yu-peng, GONG Wen-biao, GONG Ming-yue, CUI Heng(149)
 
 
Preparation and properties of Ag-carrying micro-arc oxidation ceramic film on pure titanium surface
----------------------------------------------------------------------------------------DU Chun-yan, ZHAO Hui, ZHAO Hai-tao(157)
 
 
Process of environmentally-friendly direct electroless nickel plating on AZ91D magnesium alloy surface
----------------------------------------------------------------------------------------SU Hui, LIU Hui, ZHANG Chun-bo(163)
 
 
Error and limit determination for dimensional measurements of thin-walled structures with industrial
----------------------------------------------------------------------------------------computed tomographyCHEN Zi-mu, HU Zheng-wei, WANG Qian-ni, SHI Yi-wei(169)