| 目次 |
| 综述 |
| 相变储能材料及其应用研究进展 ----------------------------------------------------------------------------------------陈 颖，姜庆辉，辛集武，李 鑫，孙兵杨，杨君友(1) |
| 超支化聚合物(HBPs)改性环氧树脂的研究进展 ----------------------------------------------------------------------------------------陈珂龙，张 桐，崔 溢，王智勇(11) |
| 异质元素改性聚硅氧烷衍生SiOC陶瓷研究进展 ----------------------------------------------------------------------------------------胡智瑜，马青松(19) |
| 冷冻浇注制备多孔陶瓷的研究进展 ----------------------------------------------------------------------------------------张 颖，王 宁，杜 艺，石 鑫，王伟超，张军战(26) |
| 多孔材料性能模型研究2:实验验证 ----------------------------------------------------------------------------------------刘培生，夏凤金，程 伟(35) |
| 研究论文 |
| 表面活性剂对高浓度石墨烯水分散液制备的影响 ----------------------------------------------------------------------------------------王 晨，燕绍九，南文争，陈 翔(50) |
| 热分解法制备Cu空心微球及其光热转换性能 ----------------------------------------------------------------------------------------徐 斌，陈程华，张彩霞，鲁聪达，倪忠进(57) |
| 壳聚糖/羟基磷灰石表面修饰聚己内酯多孔骨支架的制备及性能 ----------------------------------------------------------------------------------------张平生，辛 勇，曹传亮，艾凡荣(64) |
| 聚甲基丙稀酸羟乙酯甘油凝胶仿软骨材料的制备与性能 ----------------------------------------------------------------------------------------王 聃，陶德华，黄秀玲，华子恺(71) |
| Ag3PO4/ZnO@碳球三元异质结的合成及可见光催化性能 ----------------------------------------------------------------------------------------赵晓华，魏 崇，苏 帅，崔佳宝，周建国，李彩珠，娄向东(76) |
| 湿热环境对碳纤维增强树脂基复合材料力学性能的影响及其损伤机理 ----------------------------------------------------------------------------------------杨旭东，安 涛，邹田春，巩天琛(84) |
| PTFE/Al/MoO3复合材料的力学和反应性能 ----------------------------------------------------------------------------------------黄骏逸，方 向，李裕春，刘 强，武双章，宋佳星(92) |
| 熔体微分电纺PLA/OMMT可降解纳米纤维膜制备及污染处理 ----------------------------------------------------------------------------------------王 循，丁玉梅，余韶阳，杜 琳，杨卫民，李好义，陈明军(99) |
| CeO2掺杂对AlCoCrCuFe高熵合金的组织结构与摩擦磨损性能的影响 ----------------------------------------------------------------------------------------马明星，王志新，梁 存，周家臣，张德良，朱达川(106) |
| Ti60钛合金室温保载疲劳性能及断裂行为 ----------------------------------------------------------------------------------------刘石双，仇 平，蔡建明，李 娟，黄 旭，于 辉，刘利刚(112) |
| 基于Normalized Cockcroft & Latham韧性损伤准则Ti600合金临界损伤值的测定 ----------------------------------------------------------------------------------------张菁丽，吴金平，罗媛媛，赵 彬，郭荻子，赵圣泽，杨 帆(121) |
| Y含量对MgZn9 YxZr0.5合金热裂敏感性的影响 ----------------------------------------------------------------------------------------贾东瑞，王 越，刘 正，毛萍莉，王 峰，王 志(126) |
| Cr4Mo4V轴承钢旋转弯曲疲劳寿命及疲劳裂纹萌生机理 ----------------------------------------------------------------------------------------郭 军，杨卯生，卢德宏，李新宇(134) |
| 黏结层及真空退火对NiCr-30%Cr3C2金属-陶瓷喷涂层性能的影响 ----------------------------------------------------------------------------------------柯 鹏，蔡 飞，胡 凯，张世宏，王硕煜，朱广宏，倪振航，胡小红(144) |
| CONTENTS |
| REVIEW |
| Research status and application of phase change materials ----------------------------------------------------------------------------------------CHEN Ying,JIANG Qing-hui,XIN Ji-wu,LI Xin,SUN Bing-yang,YANG Jun-you (1) |
| Progress of hyperbranched polymers (HBPs) as modifiers in epoxy resins ----------------------------------------------------------------------------------------CHEN Ke-long，ZHANG Tong，CUI Yi,WANG Zhi-yong (11) |
| Research progress in SiOC ceramics derived from hetero element-modified polysiloxane ----------------------------------------------------------------------------------------HU Zhi-yu，MA Qing-song (19) |
| Research progress in porous ceramics prepared by freeze casting ----------------------------------------------------------------------------------------ZHANG Ying,WANG Ning,DU Yi,SHI Xin,WANG Wei-chao,ZHANG Jun-zhan (26) |
| Study on property model for porous materials 2:experimental verification ----------------------------------------------------------------------------------------LIU Pei-sheng,XIA Fei-jin,CHENG Wei (35) |
| RESEARCH ARTICLE |
| Effect of surfactants on preparation of high concentration graphene aqueous dispersion ----------------------------------------------------------------------------------------WANG Chen，YAN Shao-jiu，NAN Wen-zheng，CHEN Xiang (50) |
| Cu hollow microspheres synthesized by thermal decomposition and its photo-thermal conversion performance ----------------------------------------------------------------------------------------XU Bin,CHEN Cheng-hua,ZHANG Cai-xia,LU Cong-da,NI Zhong-jin (57) |
| Preparation and properties of polycaprolactone porous bone scaffold modified with chitosan/hydroxyapatite on the surface ----------------------------------------------------------------------------------------ZHANG Ping-sheng,XIN Yong,CAO Chuan-liang,AI Fan-rong (64) |
| Preparation and properties of poly (hydroxyethyl methacrylate) glycerol gel as biomimetic cartilage replacement material ----------------------------------------------------------------------------------------WANG Dan,TAO De-hua,HUANG Xiu-ling,HUA Zi-kai (71) |
| Synthesis and visible light photocatalytic performance of Ag3PO4/ZnO@carbon sphere ternary heterostructure ----------------------------------------------------------------------------------------ZHAO Xiao-hua,WEI Chong,SU Shuai,CUI Jia-bao, ZHOU Jian-guo,LI Cai-zhu,LOU Xiang-dong (76) |
| Effect of hygrothermal environment on mechanical properties and damage mechanism of CFRP ----------------------------------------------------------------------------------------YANG Xu-dong，AN Tao，ZOU Tian-chun，GONG Tian-chen (84) |
| Mechanical and reactive properties of PTFE/Al/MoO3 composites ----------------------------------------------------------------------------------------HUANG Jun-yi,FANG Xiang,LI Yu-chun,LIU Qiang,WU Shuang-zhang,SONG Jia-xing (92) |
| Preparation and pollution treatment of degradable PLA/OMMT nanofiber membrane by melt differential electrospinning ----------------------------------------------------------------------------------------WANG Xun，DING Yu-mei，YU Shao-yang，DU Lin， YANG Wei-min，LI Hao-yi，CHEN Ming-jun (99) |
| Effect of CeO2 doping on microstructure,friction and wear properties of AlCoCrCuFe high-entropy alloys ----------------------------------------------------------------------------------------MA Ming-xing,WANG Zhi-xin,LIANG Cun,ZHOU Jia-chen,ZHANG De-liang,ZHU Da-chuan (106) |
| Dwell fatigue property and fracture behaviour of Ti60 titanium alloy at room temperature ----------------------------------------------------------------------------------------LIU Shi-shuang,QIU Ping,CAI Jian-ming,LI Juan,HUANG Xu,YU Hui,LIU Li-gang (112) |
| Determination of critical damage value of Ti600 alloy based on Normalized Cockcroft & Latham ductile fracture criterion ----------------------------------------------------------------------------------------ZHANG Jing-li,WU Jin-ping,LUO Yuan-yuan,ZHAO Bin,GUO Di-zi, ZHAO Sheng-ze,YANG Fan (121) |
| Effect of Y content on hot tearing susceptibility of MgZn9 YxZr0.5 alloys ----------------------------------------------------------------------------------------JIA Dong-rui,WANG Yue,LIU Zheng,MAO Ping-li,WANG Feng,WANG Zhi (126) |
| Rotational bending fatigue life and fatigue crack initiation mechanism of Cr4Mo4V bearing steel ----------------------------------------------------------------------------------------GUO Jun，YANG Mao-sheng，LU De-hong，LI Xin-yu (134) |
| Effect of bond layers and vacuum annealing on sprayed NiCr-30%Cr3C2 metallic-ceramic coating ----------------------------------------------------------------------------------------KE Peng,CAI Fei,HU Kai,ZHANG Shi-hong,WANG Shuo-yu, ZHU Guang-hong,NI Zhen-hang,HU Xiao-hong (144) |