| 目次 |
| 综 述 |
| 单晶高温合金雀斑研究进展 ----------------------------------------------------------------------------------------王志成，李嘉荣，刘世忠，赵金乾，史振学，王效光，杨万鹏，岳晓岱(1) |
| 金属有机框架材料在吸附分离领域的研究进展 ----------------------------------------------------------------------------------------霍晓文，于守武，肖淑娟，谭小耀(10) |
| 锂离子电池浆料的制备技术及其影响因素 ----------------------------------------------------------------------------------------欧阳丽霞，武兆辉，王建涛(21) |
| 电解液化学保护锂金属电池负极的研究进展 ----------------------------------------------------------------------------------------杨 珺，林元华，廖 丽，陈杨阳，冯炫杰，李 佩，纪洪江，王明珊，陈俊臣，李 星(35) |
| 超高温陶瓷改性碳/碳复合材料 ----------------------------------------------------------------------------------------解齐颖，张 祎，朱 阳，崔 红(46) |
| 研究论文 |
| 纤维素/木质素微球抗紫外薄膜制备与性能研究 ----------------------------------------------------------------------------------------万玉玲，胡雨璐，许杜鑫，黄剑波，许 凤，吴玉英，张学铭(56) |
| 分级结构苯并噻二唑聚合物应用于可见光诱导硫醚选择性氧化 ----------------------------------------------------------------------------------------晏 秘，薛 云，申妍铭，程 琥，庄金亮(64) |
| 界面层对CVI-mini SiCf/SiC复合材料力学性能的影响 ----------------------------------------------------------------------------------------赵文青，齐 哲，吕晓旭，焦 健，马 壮，朱时珍(71) |
| 料浆对熔渗工艺制备碳纤维织物增强碳化硅复合材料的影响 ----------------------------------------------------------------------------------------焦春荣，焦 健(78) |
| 催化炭化-原位反应/反应熔体浸渗法制备C/C-SiC复合材料 ----------------------------------------------------------------------------------------张海连，段 淼，李四中，林志勇(85) |
| 合金化组元(Al,Cr,Si,Ti)含量对激光沉积(FeNiCo)-(AlCrSiTi)非等原子比多组元合金涂层组织与力学性能的影响 ----------------------------------------------------------------------------------------唐延川，万 能，唐兴昌，刘德佳，焦海涛，胡 勇，赵龙志(92) |
| Cu2ZnSnS4/Bi2FeCrO6半导体异质结的脉冲激光沉积法制备及其光电性能 ----------------------------------------------------------------------------------------王 杰，马 帅，夏丰金，董红周，沙震宗，贾瑞彬(103) |
| 基于核壳结构粉体设计的CoNiCrAlY-Al2O3复合涂层组织结构及其抗氧化性能 ----------------------------------------------------------------------------------------谷籽旺，郭文敏，张弘鳞，李文娟(112) |
| 气压浸渗法制备ZrC-W-Cu复合材料的显微组织与力学性能 ----------------------------------------------------------------------------------------邢宇轩，郭英奎，陈 磊，赵壮志，王玉金(124) |
| 基于非线性超声空化效应的铝合金热浸镀工艺 ----------------------------------------------------------------------------------------陈海燕，曾 越，李 艺，吴建新，许世锬，邹燕成(133) |
| Al2O3型壳与定向凝固合金IC10的界面反应 ----------------------------------------------------------------------------------------吴笑非，姚建省，王丽丽，董龙沛，武振强，沈 滨，杨小薇(141) |
| 化学强化铝硅酸盐玻璃表面微观力学行为的有限元模拟 ----------------------------------------------------------------------------------------李晓宇，姜良宝，刘家希，王敏博，李佳明，颜 悦(148) |
| 搭接长度对CFRP单搭接胶接接头拉伸性能及破坏特征的影响 ----------------------------------------------------------------------------------------邹田春，符 记，李龙辉，刘志浩，祝 贺(158) |
| CONTENTS |
| REVIEW |
| Research progress in freckles of single crystal superalloys ----------------------------------------------------------------------------------------WANG Zhi-cheng,LI Jia-rong,LIU Shi-zhong,ZHAO Jin-qian,SHI Zhen-xue,WANG Xiao-guang,YANG Wan-peng,YUE Xiao-dai(1) |
| Research progress of metal-organic framework materials in adsorption separation ----------------------------------------------------------------------------------------HUO Xiao-wen,YU Shou-wu,XIAO Shu-juan,TAN Xiao-yao(10) |
| Fabricating technology and influence factors of slurries in Li-ion batteries ----------------------------------------------------------------------------------------OUYANG Li-xia,WU Zhao-hui,WANG Jian-tao(21) |
| Research progress in anode protection of lithium metal batteries by electrolyte chemistry ----------------------------------------------------------------------------------------YANG Jun,LIN Yuan-hua,LIAO Li,CHEN Yang-yang,FENG Xuan-jie,LI Pei,JI Hong-jiang,WANG Ming-shan,CHEN Jun-chen,LI Xing(35) |
| Ultra-high temperature ceramics modified carbon/carbon composites ----------------------------------------------------------------------------------------XIE Qi-ying,ZHANG Yi,ZHU Yang,CUI Hong(46) |
| RESEARCH ARTICLE |
| Fabrication and characterization of cellulose/lignin microspheres films with UV-blocking ----------------------------------------------------------------------------------------WAN Yu-ling,HU Yu-lu,XU Du-xin,HUANG Jian-bo,XU Feng,WU Yu-ying,ZHANG Xue-ming(56) |
| Visible-light induced selective oxidation of sulfides by hierarchical benzothiadiazole-based polymers ----------------------------------------------------------------------------------------YAN Mi,XUE Yun,SHEN Yan-ming,CHENG Hu,ZHUANG Jin-liang(64) |
| Effects of interphases on mechanical properties of CVI-mini SiCf/SiC composites ----------------------------------------------------------------------------------------ZHAO Wen-qing, QI Zhe, LYU Xiao-xu, JIAO Jian, MA Zhuang, ZHU Shi-zhen(71) |
| Effect of slurry on preparation of carbon fiber fabric reinforced silicon carbide ceramic matrix composite by melt infiltration ----------------------------------------------------------------------------------------JIAO Chun-rong,JIAO Jian(78) |
| Fabrication of C/C-SiC composites via catalytic carbonization-in situ reacted and catalytic carbonization-reactive melt infiltration process ----------------------------------------------------------------------------------------ZHANG Hai-lian, DUAN Miao, LI Si-zhong, LIN Zhi-yong(85) |
| Effect of alloying components (Al,Cr,Si,Ti) content on microstructure and mechanical properties of non-equiatomic (FeNiCo)-(AlCrSiTi) multicomponent alloy coatings manufactured by laser deposition ----------------------------------------------------------------------------------------TANG Yan-chuan, WAN Neng, TANG Xing-chang, LIU De-jia, JIAO Hai-tao, HU Yong, ZHAO Long-zhi(92) |
| Cu2ZnSnS4/Bi2FeCrO6 semiconductor heterojunction grown by pulsed laser deposition and its optoelectronic properties ----------------------------------------------------------------------------------------WANG Jie, MA Shuai, XIA Feng-jin, DONG Hong-zhou, SHA Zhen-zong, JIA Rui-bin(103) |
| Microstructure and anti-oxidation properties of CoNiCrAlY-Al2O3 composite coatings based on core-shell structured powder design ----------------------------------------------------------------------------------------GU Zi-wang, GUO Wen-min, ZHANG Hong-lin,LI Wen-juan(112) |
| Microstructure and mechanical properties of ZrC-W-Cu composites prepared via gas pressure infiltration ----------------------------------------------------------------------------------------XING Yu-xuan, GUO Ying-kui, CHEN Lei, ZHAO Zhuang-zhi, WANG Yu-jin(124) |
| Hot dip process of aluminum alloy based on nonlinear ultrasonic cavitation effect ----------------------------------------------------------------------------------------CHEN Hai-yan, ZENG Yue, LI Yi,WU Jian-xin, XU Shi-tan, ZOU Yan-cheng(133) |
| HInterface reactions between Al2O3 mold and directionally solidified alloy IC10 ----------------------------------------------------------------------------------------WU Xiao-fei,YAO Jian-sheng,WANG Li-li,DONG Long-pei,WU Zhen-qiang,SHEN Bin,YANG Xiao-wei(141) |
| Finite element modelling of surface micromechanical behavior on chemically strengthened aluminosilicate glass ----------------------------------------------------------------------------------------LI Xiao-yu, JIANG Liang-bao, LIU Jia-xi, WANG Min-bo, LI Jia-ming,YAN Yue(148) |
| Effect of overlap length on tensile properties and failure characteristics of CFRP single-lap adhesive joints ----------------------------------------------------------------------------------------ZOU Tian-chun, FU Ji, LI Long-hui, LIU Zhi-hao, ZHU He(158) |