| 目次 |
| 综 述 |
| 高韧性三元层状陶瓷：从MAX相到MAB相 ----------------------------------------------------------------------------------------柏跃磊，尹 航，宋广平，赫晓东，齐欣欣，高 进，郝兵兵，张金泽(1) |
| 生物可降解医用镁合金体内外降解行为研究进展 ----------------------------------------------------------------------------------------田亚强，赵冠璋，刘 芸，张 源，郑小平,陈连生(24) |
| 负泊松比超材料和结构 ----------------------------------------------------------------------------------------高玉魁(38) |
| 水滑石作为润滑油(脂)添加剂的摩擦性能及其影响因素 ----------------------------------------------------------------------------------------李桂金，张忠伦，白志民(48) |
| 相变储湿复合材料及其应用研究进展 ----------------------------------------------------------------------------------------张 浩，臧君杰，李海丽，宗志芳(56) |
| 研究论文 |
| 3D打印琼脂糖和海藻酸钠复合水凝胶组织与性能研究 ----------------------------------------------------------------------------------------汤桂平，严 倩，刘 洁，宋 波，文世峰，史玉升(66) |
| W18O49/C-TiO2直接Z型光催化剂的制备及光解水制氢性能 ----------------------------------------------------------------------------------------张 坤，杨玉蓉，陈飞阳，齐 琪，张春光，高 帆(75) |
| 三维结构石墨烯气凝胶/环氧树脂复合材料的制备和电磁屏蔽性能 ----------------------------------------------------------------------------------------陈 宇，张代军，李 军，温嘉轩，陈祥宝(82) |
| 静电纺CA/PpIX多孔纤维膜的制备及其光动力性能 ----------------------------------------------------------------------------------------沈慧颖，吕子豪，庄粟裕，曹秀明，王清清(89) |
| 炭化过程施压对气体扩散层用碳纸结构与性能的影响 ----------------------------------------------------------------------------------------方 滔，陈 力，廉博博，胡 健，李海龙(98) |
| 颜色可调Y(PO3)3: Tb3+,Yb3+上转换发光材料的共沉淀制备及性能 ----------------------------------------------------------------------------------------李慧玲，李蓝苹，饶啟亮，张 玲，陈雪羽，顾曼琦，杨锦瑜(106) |
| 热氧老化作用对丁腈橡胶力学性能和摩擦学行为的影响 ----------------------------------------------------------------------------------------李 波，李圣鑫，张执南，张 坚，熊光耀，沈明学(114) |
| 2195铝锂合金超声振动辅助搅拌摩擦焊接工艺研究 ----------------------------------------------------------------------------------------石 磊，戴 翔，武传松，傅 莉(122) |
| 中间形变热处理对2A97铝锂合金组织和性能的影响 ----------------------------------------------------------------------------------------于 娟，陆 政，鲁 原，熊艳才，李国爱，冯朝辉，郝时嘉(130) |
| 超音速微粒轰击对TC11钛合金组织和疲劳性能的影响 ----------------------------------------------------------------------------------------武永丽，熊 毅，陈正阁，查小琴，岳 赟，刘玉亮，张金民，任凤章(137) |
| SiC/SiC复合材料在高温空气中的氧化行为 ----------------------------------------------------------------------------------------洪智亮，张巧君，李开元，郭洪宝，张程煜，刘永胜(144) |
| 硅溶胶添加对氧化铝多孔陶瓷烧结性能的影响 ----------------------------------------------------------------------------------------林洪玉，李晓鸿，陈 璐，杨 波，姚 森，曾小州，李安林，黎 阳(151) |
| ZrO2/Al2O3多孔陶瓷的制备与力学性能 ----------------------------------------------------------------------------------------蒋浩然，林 硕，张康飞，王海燕，王佳齐，何秀兰(157) |
| 甲基硅酸盐/硅酸盐复合膜的组成和性能研究 ----------------------------------------------------------------------------------------张双红，杨 波，翟 伟，李 爽，孔 纲(163) |
| 完全非晶态Ni-B合金镀层的电沉积制备 ----------------------------------------------------------------------------------------韩锡正，费敬银，赵利娜，燕宝强，王 俊(171) |
| CONTENTS |
| REVIEW |
| High-fracture-toughness ternary layered ceramics: from the MAX to MAB phases ----------------------------------------------------------------------------------------BAI Yue-lei，YIN Hang，SONG Guang-ping，HE Xiao-dong，QI Xin-xin， GAO Jin，HAO Bing-bing，ZHANG Jin-ze(1) |
| Research progress in degradation behavior of biodegradable medical Mg-based alloys in vivo and in vitro ----------------------------------------------------------------------------------------TIAN Ya-qiang,ZHAO Guan-zhang,LIU Yun,ZHANG Yuan,ZHENG Xiao-ping,CHEN Lian-sheng(24) |
| Auxetic metamaterials and structures ----------------------------------------------------------------------------------------GAO Yu-kui(38) |
| Friction performance of hydrotalcite as lubrication oil (grease) additive and its influence factors ----------------------------------------------------------------------------------------LI Gui-jin，ZHANG Zhong-lun，BAI Zhi-min(48) |
| Research status and application of phase change humidity storage composite materials ----------------------------------------------------------------------------------------ZHANG Hao,ZANG Jun-jie,LI Hai-li,ZONG Zhi-fang(56) |
| RESEARCH ARTICLE |
| Microstructure and properties of 3D printed agarose and sodium alginate composite hydrogel ----------------------------------------------------------------------------------------TANG Gui-ping，YAN Qian，LIU Jie，SONG Bo，WEN Shi-feng，SHI Yu-sheng(66) |
| Preparation of W18O49/C-TiO2 direct Z-scheme photocatalyst and photocatalytic water splitting for H2 production ----------------------------------------------------------------------------------------ZHANG Kun,YANG Yu-rong,CHEN Fei-yang,QI Qi,ZHANG Chun-guang,GAO Fan(75) |
| Preparation and electromagnetic interference shielding performance of epoxy composites modified with three-dimensional graphene aerogels ----------------------------------------------------------------------------------------CHEN Yu，ZHANG Dai-jun，LI Jun，WEN Jia-xuan，CHEN Xiang-bao(82) |
| Preparation and photodynamic performance of electrospinning CA/PpIX porous fibrous membrane ----------------------------------------------------------------------------------------SHEN Hui-ying，LYU Zi-hao，ZHUANG Su-yu，CAO Xiu-ming，WANG Qing-qing(89) |
| Effect of applying pressure during carbonization process on structure and properties of carbon paper for gas diffusion layer ----------------------------------------------------------------------------------------FANG Tao,CHEN Li,LIAN Bo-bo,HU Jian,LI Hai-long(98) |
| Coprecipitation synthesis and properties of color tunable and upconversion luminescence in Tb3+ and Yb3+ co-doped Y(PO3)3 materials ----------------------------------------------------------------------------------------LI Hui-ling,LI Lan-ping,RAO Qi-liang,ZHANG Ling,CHEN Xue-yu,GU Man-qi,YANG Jin-yu(106) |
| Effect of thermo-oxidative aging on mechanical properties and tribological behaviors of acrylonitrile-butadiene rubber ----------------------------------------------------------------------------------------LI Bo，LI Sheng-xin，ZHANG Zhi-nan,ZHANG Jian,XIONG Guang-yao,SHEN Ming-xue(114) |
| Process investigation on ultrasonic vibration enhanced friction stir welding of 2195 aluminum-lithium alloy ----------------------------------------------------------------------------------------SHI Lei，DAI Xiang，WU Chuan-song，FU Li(122) |
| Effect of intermediate thermomechanical treatment on microstructure and properties of 2A97 Al-Li alloy ----------------------------------------------------------------------------------------YU Juan，LU Zheng，LU Yuan,XIONG Yan-cai，LI Guo-ai，FENG Zhao-hui，HAO Shi-jia(130) |
| Effect of supersonic fine particle bombardment on microstructure and fatigue properties of TC11 titanium alloy ----------------------------------------------------------------------------------------WU Yong-li，XIONG Yi，CHEN Zheng-ge，ZHA Xiao-qin，YUE Yun，LIU Yu-liang，ZHANG Jin-min，REN Feng-zhang(137) |
| Oxidation behavior of SiC/SiC composites in air at high temperature ----------------------------------------------------------------------------------------HONG Zhi-liang,ZHANG Qiao-jun,LI Kai-yuan,GUO Hong-bao,ZHANG Cheng-yu，LIU Yong-sheng(144) |
| Effect of silica sol addition on sintering properties of porous alumina ceramics ----------------------------------------------------------------------------------------LIN Hong-yu，LI Xiao-hong，CHEN Lu，YANG Bo，YAO Sen，ZENG Xiao-zhou，LI An-lin，LI Yang(151) |
| Preparation and mechanical properties of ZrO2/Al2O3 porous ceramics ----------------------------------------------------------------------------------------JIANG Hao-ran，LIN Shuo，ZHANG Kang-fei，WANG Hai-yan，WANG Jia-qi，HE Xiu-lan(157) |
| Composition and properties of methyl silicate/silicate composite coatings ----------------------------------------------------------------------------------------ZHANG Shuang-hong，YANG Bo，ZHAI Wei，LI Shuang，KONG Gang(163) |
| Electrodeposition of completely amorphous Ni-B alloy coatings ----------------------------------------------------------------------------------------HAN Xi-zheng,FEI Jing-yin,ZHAO Li-na,YAN Bao-qiang,WANG Jun(171) |