| 目次 |
| 综 述 |
|
高熵合金在钎焊和表面工程领域的应用研究进展 ----------------------------------------------------------------------------------------李 红，韩 祎，曹 健，MARIUSZ Bober，JACEK Senkara(1) |
| 钛合金在骨科植入领域的研究进展 ----------------------------------------------------------------------------------------刘剑桥，刘 佳，唐毓金，王立强(11) |
| 全固态锂电池中金属锂负极及其界面设计的研究进展 ----------------------------------------------------------------------------------------杨 杰，王 凯，徐亚楠，王克俭，马衍伟(26) |
| 光子晶体在光催化领域的研究进展 ----------------------------------------------------------------------------------------褚召冉，陈 功，赵雪伶，林东海，陈 诚(43) |
| TiO2/MXene纳米复合材料的可控制备及在光催化和电化学中的应用研究进展 ----------------------------------------------------------------------------------------李华鹏，董旭晟，孙 彬，周国伟(54) |
| 研究论文 |
| 冷却速度及超声振动协同作用对7085铝合金凝固组织及力学性能的影响 ----------------------------------------------------------------------------------------李安庆，张立华，蒋日鹏，李晓谦，张 昀(63) |
| 7050铝合金结构件热处理与冷成形过程残余应力演化规律的数值模拟 ----------------------------------------------------------------------------------------王 浩，肖纳敏，李惠曲，王 晓(72) |
| 预弯曲变形对CP800复相钢力学性能的影响 ----------------------------------------------------------------------------------------孙昊飞，肖 志，韦 凯，杨旭静，齐 军(81) |
| SiC晶须增强SiCf/SiC复合材料的力学性能 ----------------------------------------------------------------------------------------姜卓钰，束小文，吕晓旭，高 晔，周怡然，董禹飞，焦 健(89) |
| 添加Si对马氏体不锈钢淬火-配分组织和性能的影响 ----------------------------------------------------------------------------------------王官涛，周永浪，赵 卓，王立军，刘春明(97) |
| 交流磁场辅助铜-钢TIG填丝焊接头组织和力学性能 ----------------------------------------------------------------------------------------王 龙，胡德安，邹鹏远，熊震宇，陈益平，程东海(104) |
| 氢化钛预氧化处理和发泡温度对Al-7Si闭孔泡沫铝泡孔结构的影响 ----------------------------------------------------------------------------------------杨旭东，谢明睿, 邹田春，纵荣荣(111) |
| 自组装Cu6Sn5超疏水冶金结合界面的构筑及其在铜缓蚀中的应用 ----------------------------------------------------------------------------------------高朝卿，王 晨，陈胤伯，尚胜艳，陈 菲，马海涛，王云鹏(120) |
| 化学镀制备纳米银-石墨烯复合材料及其电化学性能 ----------------------------------------------------------------------------------------李金磊，邓凌峰，张淑娴，谭洁慧，覃榕荣，王 壮(127) |
| 热氧老化对木橡塑三元复合材料力学性能及耐热性能的影响 ----------------------------------------------------------------------------------------王伟东，李 奇，赵雪松，张阁昊(139) |
| 乙烯-乙烯醇共聚物/尼龙6复合材料的加工流变性能 ----------------------------------------------------------------------------------------易著武，刘跃军，刘小超，杨 坚，李祥刚，范淑红(145) |
| 壳聚糖/木质素磺酸钠吸附剂的制备及其除Pb2+和Cd2+ ----------------------------------------------------------------------------------------郝冬亮，王琪琳，毛欣宇，梁雅丽，邵孝候(153) |
| 纳米形貌对Ce-V催化剂降解氯苯活性影响 ----------------------------------------------------------------------------------------施 琦，丁 龙，龙红明，王毅璠，春铁军(162) |
| 吸湿后碳纤维复合材料正交层板拉伸疲劳性能 ----------------------------------------------------------------------------------------张祥林，孟庆春，许名瑞，曾本银，程小全，孙 炜(169) |
| 2D-C/SiC复合材料轴向加载泊松效应 ----------------------------------------------------------------------------------------郭洪宝，洪智亮，李开元，梅文斌(178) |
| CONTENTS |
| REVIEW |
| Research progress in high-entropy alloys used in brazing and surface engineering fields ----------------------------------------------------------------------------------------LI Hong, HAN Yi, CAO Jian, MARIUSZ Bober, JACEK Senkara(1) |
| Research progress in titanium alloy in the field of orthopaedic implants ----------------------------------------------------------------------------------------LIU Jian-qiao, LIU Jia, TANG Yu-jin, WANG Li-qiang(11) |
| Research progress on lithium anode and interface engineering of lithium/solid-state electrolyte in all-solid-state lithium metal battery ----------------------------------------------------------------------------------------YANG Jie, WANG Kai, XU Ya-nan, WANG Ke-jian, MA Yan-wei(26) |
| Research progress of photonic crystals in photocatalysis ----------------------------------------------------------------------------------------CHU Zhao-ran, CHEN Gong, ZHAO Xue-ling, LIN Dong-hai, CHEN Cheng(43) |
| Research progress on controllable preparation of TiO2/MXene nanocomposites and applications in photocatalysis and electrochemistry ----------------------------------------------------------------------------------------LI Hua-peng,DONG Xu-sheng,SUN Bin,ZHOU Guo-wei(54) |
| RESEARCH ARTICLE |
| Effect of cooling speed and ultrasonic vibration on solidification structure and mechanical properties of 7085 aluminum alloy ----------------------------------------------------------------------------------------LI An-qing, ZHANG Li-hua, JIANG Ri-peng, LI Xiao-qian, ZHANG Yun(63) |
| Modeling of residual stress evolution of 7050 aluminium alloy component during heat treatment and cold forming ----------------------------------------------------------------------------------------WANG Hao,XIAO Na-min,LI Hui-qu,WANG Xiao(72) |
| Effect of pre-bending deformation on mechanical properties of complex phase steel CP800 ----------------------------------------------------------------------------------------SUN Hao-fei,XIAO Zhi,WEI Kai,YANG Xu-jing,QI Jun(81) |
| Mechanical properties of SiC whiskers reinforced SiCf/SiC composites ----------------------------------------------------------------------------------------JIANG Zhuo-yu,SHU Xiao-wen,LYU Xiao-xu,GAO Ye,ZHOU Yi-ran,DONG Yu-fei,JIAO Jian(89) |
|
Effects of Si addition on microstructure and properties of martensitic stainless steel treated by quenching and partitioning process ----------------------------------------------------------------------------------------WANG Guan-tao, ZHOU Yong-lang, ZHAO Zhuo, WANG Li-jun, LIU Chun-ming(97) |
| Microstructure and mechanical properties of copper-steel TIG filling-wire welding joint assisted by AC magnetic field ----------------------------------------------------------------------------------------WANG Long,HU De-an,ZOU Peng-yuan,XIONG Zhen-yu,CHEN Yi-ping,CHENG Dong-hai(104) |
| Effect of pre-oxidation treatment of TiH2 and foaming temperature on cell structure of Al-7Si closed-cell aluminum foams ----------------------------------------------------------------------------------------YANG Xu-dong, XIE Ming-rui, ZOU Tian-chun, ZONG Rong-rong(111) |
|
Constructing robust superhydrophobic interface with self-assembled Cu6Sn5 arrays and application in copper corrosion inhibition ----------------------------------------------------------------------------------------GAO Zhao-qing,WANG Chen,CHEN Yin-bo,SHANG Sheng-yan,CHEN Fei,MA Hai-tao,WANG Yun-peng(120) |
|
Preparation and electrochemical performance of nano-silver-graphene composite by electroless plating ----------------------------------------------------------------------------------------LI Jin-lei, DENG Ling-feng, ZHANG Shu-xian, TAN Jie-hui, QIN Rong-rong, WANG Zhuang(127) |
|
Effect of heat oxygen aging on mechanical properties and heat resistance of wood rubber plastic ternary composites ----------------------------------------------------------------------------------------WANG Wei-dong,LI Qi,ZHAO Xue-song,ZHANG Ge-hao(139) |
|
Processing rheological properties of ethylene-vinyl alcohol copolymer/nylon 6 composites ----------------------------------------------------------------------------------------YI Zhu-wu,LIU Yue-jun,LIU Xiao-chao,YANG Jian,LI Xiang-gang,FAN Shu-hong(145) |
|
Preparation of chitosan/sodium lignosulfonate adsorbent and its removal of Pb2+ and Cd2+ ----------------------------------------------------------------------------------------HAO Dong-liang,WANG Qi-lin,MAO Xin-yu,LIANG Ya-li,SHAO Xiao-hou(153) |
|
Effect of nanostructure on catalytic degradation of chlorobenzene over Ce-V catalysts ----------------------------------------------------------------------------------------SHI Qi, DING Long, LONG Hong-ming, WANG Yi-fan, CHUN Tie-jun(162) |
| Tensile fatigue properties of carbon fiber reinforced composite orthogonal laminates after moisture absorption ----------------------------------------------------------------------------------------ZHANG Xiang-lin, MENG Qing-chun, XU Ming-rui, ZENG Ben-yin, CHENG Xiao-quan, SUN Wei(169) |
|
Poisson effects of 2D-C/SiC composite under axial loading conditions ----------------------------------------------------------------------------------------GUO Hong-bao, HONG Zhi-liang, LI Kai-yuan, MEI Wen-bin(178) |