| 目次 |
| 综 述 |
|
基于超材料的无标记光学生物传感 ----------------------------------------------------------------------------------------陶承东，刘传宝，李 扬，乔利杰，周 济，白 洋(1) |
|
硅氧烷化合物的合成与应用进展 ----------------------------------------------------------------------------------------程玉桥，路 双，冯 喆，赵文辉，张治婷，赵 越(13) |
|
g-C3N4基异质耦合光催化剂制备及在环境污染物去除领域的研究进展 ---------------------------------------------------------------------------------------- 葛玉杰，吴 姣，何志强，王国华，刘金香(23) |
|
Fe基非晶合金粉末的研究进展 ----------------------------------------------------------------------------------------王海博，李春燕，李金玲，王顺平，寇生中(34) |
|
金属激光3D 打印过程数值模拟应用及研究现状 ----------------------------------------------------------------------------------------杨 鑫，王 犇，谷文萍，张兆洋，刘世锋，武 涛(52) |
| 研究论文 |
|
钌和铼对先进单晶高温合金组织稳定性的协同影响 ----------------------------------------------------------------------------------------岳晓岱，李嘉荣，刘世忠，史振学，王效光，董建民(63) |
|
800 MPa级超高强度铝合金的时效析出行为 ----------------------------------------------------------------------------------------臧金鑫，邢清源，陈军洲，戴圣龙(71) |
|
一种细化AZ31镁合金的固液两相区复合挤压工艺 ----------------------------------------------------------------------------------------冯靖凯，张丁非，陈 霞，赵 阳，蒋 斌，潘复生(78) |
|
高应变速率下等径角挤压高纯粗晶铝中的形变孪晶与退火孪晶 ----------------------------------------------------------------------------------------刘敬勇，卢 磊，钟政烨(89) |
|
铝基复合材料半固态压缩变形组织演化同步辐射原位CT研究 ----------------------------------------------------------------------------------------王 玮，郭恩宇，王同敏(95) |
|
超弹性NiTi合金率相关相变图案演化模拟 ----------------------------------------------------------------------------------------赵家祥，李 建，梁志鸿，邱 博，阚前华(102) |
|
铁路车辆用V-N-Cr微合金化Q690高强耐候钢组织性能和腐蚀行为 ----------------------------------------------------------------------------------------刘 悦,吴红艳,杜林秀(111) |
|
低温炭化温度梯度对聚丙烯腈预氧纤维结构演变及碳纤维性能的影响 ----------------------------------------------------------------------------------------何 沐，王 宇，徐樑华(120) |
|
改性碳纤维增强尼龙6复合材料的制备及性能 ----------------------------------------------------------------------------------------刘 旭，徐 海，徐立新，张 宏，周 琼(128) |
|
聚乳酸/聚乙二醇/羟基磷灰石多孔骨支架的3D打印制备及其生物相容性 ---------------------------------------------------------------------------------------- 范泽文，赵新宇， 邱 帅，王 艳，郭 静，权慧欣，徐兰娟(135) |
|
pH敏感水凝胶微球的制备及二甲酸钾缓释和抗菌性能分析 ---------------------------------------------------------------------------------------- 郭小炜，李玉妍，王秀丽，杨忠鑫，陈南春，解庆林(142) |
|
分级微/纳结构ZnO的制备及其光催化性能 ----------------------------------------------------------------------------------------向小倩，廖小刚，李 纲，胡学步，田 甜(150) |
|
Li7P2S8I固态电解质的湿化学法制备及性能 ----------------------------------------------------------------------------------------刘伟明，李久勇，张晓锋，马一博，韦友秀，张 旋，颜 悦(159) |
|
苯胺或邻苯二胺/YBCO杂化材料的性能 ----------------------------------------------------------------------------------------林 珊，袁红梅,汪 东,陈淑卿，章文贡，陈礼辉(167) |
| CONTENTS |
| REVIEW |
|
Metamaterial-based label-free optical biosensing ---------------------------------------------------------------------------------------- TAO Cheng-dong,LIU Chuan-bao,LI Yang,QIAO Li-jie,ZHOU Ji,BAI Yang(1) |
|
Research progress in synthesis and application of siloxane compounds ---------------------------------------------------------------------------------------- CHENG Yu-qiao，LU Shuang，FENG Zhe，ZHAO Wen-hui，ZHANG Zhi-ting，ZHAO Yue(13) |
|
Research progress in preparation and application of g-C3N4-based heterogeneous photocatalyst for environmental pollutant removal ---------------------------------------------------------------------------------------- GE Yu-jie，WU Jiao，HE Zhi-qiang，WANG Guo-hua， LIU Jin-xiang(23) |
|
Research progress in Fe-based amorphous alloy powder ---------------------------------------------------------------------------------------- WANG Hai-bo，LI Chun-yan，LI Jin-ling,WANG Shun-ping,KOU Sheng-zhong(34) |
|
Application and research status of numerical simulation of metal laser 3D printing process ---------------------------------------------------------------------------------------- YANG Xin,WANG Ben,GU Wen-ping,ZHANG Zhao-yang,LIU Shi-feng,WU Tao(52) |
| RESEARCH ARTICLE |
|
Synergistic effect of ruthenium and rhenium on microstructure stability of advanced single crystal superalloys ---------------------------------------------------------------------------------------- YUE Xiao-dai，LI Jia-rong，LIU Shi-zhong，SHI Zhen-xue，WANG Xiao-guang，DONG Jian-min(63) |
|
Aging precipitation behavior of 800 MPa grade ultra high strength aluminum alloy ---------------------------------------------------------------------------------------- ZANG Jin-xin，XING Qing-yuan，CHEN Jun-zhou，DAI Sheng-long(71) |
|
A fine microstructure of AZ31 magnesium alloy developed by composite extrusion in solid-liquid two-phase region ---------------------------------------------------------------------------------------- FENG Jing-kai,ZHANG Ding-fei,CHEN Xia,ZHAO Yang,JIANG Bin,PAN Fu-sheng(78) |
|
Deformation twins and annealing twins in high purity coarse-grained aluminum by equal channel angular pressing at high strain rate ---------------------------------------------------------------------------------------- LIU Jing-yong，LU Lei，ZHONG Zheng-ye(89) |
|
Microstructure evolution of Al-matrix composites during semi-solid compressive deformation revealed by synchrotron in situ CT study ---------------------------------------------------------------------------------------- WANG Wei,GUO En-yu,WANG Tong-min(95) |
|
Simulation on rate-dependent transformation pattern evolution of super-elastic NiTi alloy ---------------------------------------------------------------------------------------- ZHAO Jia-xiang,LI Jian,LIANG Zhi-hong,QIU Bo,KAN Qian-hua(102) |
|
Microstructure and corrosion behavior of V-N-Cr microalloyed Q690 high strength weathering steel for railway vehicles ---------------------------------------------------------------------------------------- LIU Yue,Wu Hong-yan,DU Lin-xiu(111) |
|
Effect of low-temperature carbonization temperature gradient on structural evolution of PAN stabilized fiber and properties of carbon fiber ---------------------------------------------------------------------------------------- HE Mu，WANG Yu，XU Liang-hua(120) |
|
Preparation and properties of modified carbon fiber reinforced polyamide 6 composites ---------------------------------------------------------------------------------------- LIU Xu,XU Hai,XU Li-xin,ZHANG Hong,ZHOU Qiong(128) |
|
3D printing of polylactic acid/poly ethylene glycol/hydroxyapatite porous bone scaffolds and their biocompatibility ---------------------------------------------------------------------------------------- FAN Ze-wen,ZHAO Xin-yu,QIU Shuai,WANG Yan,GUO Jing,QUAN Hui-xin,XU Lan-juan(135) |
|
Preparation of pH-sensitivity hydrogel microspheres and potassium diformate sustained-release and antibacterial performance analysis ---------------------------------------------------------------------------------------- GUO Xiao-wei，LI Yu-yan，WANG Xiu-li，YANG Zhong-xin，CHEN Nan-chun，XIE Qing-lin(142) |
|
Preparation of ZnO with micro/nano hierarchical structure and its photocatalytic performances ---------------------------------------------------------------------------------------- XIANG Xiao-qian,LIAO Xiao-gang,LI Gang,HU Xue-bu,TIAN Tian(150) |
|
Preparation and properties of Li7P2S8I solid electrolyte by wet-chemical method ---------------------------------------------------------------------------------------- LIU Wei-ming，LI Jiu-yong，ZHANG Xiao-feng，MA Yi-bo，WEI You-xiu，ZHANG Xuan，YAN Yue(159) |
|
Properties of aniline or O-phenylenediamine/YBCO hybrid materials ---------------------------------------------------------------------------------------- LIN Shan,YUAN Hong-mei,WANG Dong,CHEN Shu-qing,ZHANG Wen-gong,CHEN Li-hui(167) |