| 目次 |
| 综 述 |
| 层状双氢氧化物析氧催化剂的研究进展 ----------------------------------------------------------------------------------------谢博尧，张纪梅，郝帅帅，毕明刚，朱海彬，张丽萍(1) |
| 纳米材料改善硝酸熔盐传蓄热性能的研究进展 ----------------------------------------------------------------------------------------武延泽，王 敏，李锦丽，赵有璟，王怀有，魏 明(10) |
| 生物医用镁合金腐蚀行为的研究进展 ----------------------------------------------------------------------------------------万 天，宋述鹏，王今朝，周和荣，毛雨旭，熊少聪，李梦君(19) |
| 研究论文 |
| 三维针刺 C/C-SiC复合材料预制体工艺参数优化 ----------------------------------------------------------------------------------------戚云超，方国东，梁军，谢军波(27) |
| 模拟聚乙烯块体相变和导热的粗粒化模型和势场建立 ----------------------------------------------------------------------------------------蔡庄立，赵伶玲，虞兮凡，陈超(34) |
| EStM- fabric/3266复合材料低速冲击响应及冲击后压缩行为研究 ----------------------------------------------------------------------------------------董慧民，闫丽，安学锋，钱黄海，苏正涛，益小苏(41) |
| 纤维增强石英复合材料的改性处理及性能研究 ----------------------------------------------------------------------------------------张冰清，杨小波，孙志强，苗镇江，王华栋，吕毅(48) |
| 基于焊道尺寸控制的电弧增材成形高氮奥氏体不锈钢与316L不锈钢交织结构 ----------------------------------------------------------------------------------------姚祥宏，周琦，王克鸿，章晓勇(54) |
| 退火工艺参数及母材性能对取向硅钢超薄带磁性能的影响 ----------------------------------------------------------------------------------------涂蕴超，何承绪，孟利，陈冷(61) |
| 022Cr25NiMo4N双相不锈钢等温处理中的组织演变 ----------------------------------------------------------------------------------------丰涵，王宝顺，吴晓涵，王曼，佴启亮，宋志刚(70) |
| 检验腐蚀对镍基单晶高温合金高周疲劳性能的影响 ----------------------------------------------------------------------------------------董建民，李嘉荣，韩梅(77) |
| Sc元素对ZL205A合金组织和力学性能的影响 ----------------------------------------------------------------------------------------刘闪光，李国爱，罗传彪，李海超，陆政，戴圣龙(84) |
| Ce对铸态Mg-6Zn合金组织与导热性能的影响 ----------------------------------------------------------------------------------------代晓腾，马鸣龙，张奎，李永军，袁家伟，刘小稻，王胜青(92) |
| SiO2海水中小球藻对Mg-3Y-1.5Nd镁合金腐蚀行为的影响 ----------------------------------------------------------------------------------------林梦晓，张杰，蒋全通，李佳润，路东柱，侯保荣，孙园园(98) |
| AZ91及AZ91-Y合金复合干摩擦性能的对比 ----------------------------------------------------------------------------------------李春华，王晗，郝海(108) |
| 热处理温度对TCl7（α+β）/TC17（β）钛合金线性摩擦焊接头组织及力学性能的影响 ----------------------------------------------------------------------------------------李晓红，张彦华，李赞，李菊，张田仓(115) |
| PDC- SIBCN陶瓷基无线无源温度传感器的性能 ----------------------------------------------------------------------------------------余煜玺，韩滨(121) |
| AC+L（NiCoMn）O2/Li4Ti5O12+ MWCNTS混合型电容器 ----------------------------------------------------------------------------------------陈玮，孙晓刚，胡浩，王杰，李旭，梁国东，黄雅盼，魏成成(128) |
| 羟基磷灰石纳米棒的水热制备及其晶体生长机理研究 ----------------------------------------------------------------------------------------焦华，赵康，石蕊，马利宁，卞铁荣，汤玉斐(136) |
| 电火花加工制备铜基微纳层次结构及其疏水性能 ----------------------------------------------------------------------------------------何照荣，揭晓华，连玮琦(144) |
| 炭吸附共沉淀纳米铁酸钐的制备及其可见光催化性能 ----------------------------------------------------------------------------------------李金星，汪巧仙，郭贵宝，刘金彦(150) |
| 硅藻基As（Ⅴ）表面印迹材料的制备与表征 ----------------------------------------------------------------------------------------梁效铭，钟溢健，马丽丽，李聪，陈南春，解庆林(156) |
| CONTENTS |
| REVIEW |
| Research progress in layered double hydroxides catalysts for oxygen evolution reaction ----------------------------------------------------------------------------------------XIE Bo-yao, ZHANG Ji-mei, HAO Shuai-shuai, BI Ming-gang, ZHU Hai-bin, ZHANG Li-ping(1) |
| Research progress in improving heat transfer and heat storage performance of molten nitrate by nanomaterials ----------------------------------------------------------------------------------------WU Yan-ze, WANG Min, LI Jin-li, ZHAO Your-jing, WANG Huai-you, WEI Ming(10) |
| Research progress in corrosion behavior of biomedical magnesium alloys ----------------------------------------------------------------------------------------WAN Tian, SONG Shu-peng, WANG Jin-zhao, ZHOU He-rong, MAO Yu-xu, XIONG Shao-cong, LI Meng-jun(19) |
| RESEARCH ARTICLE |
| Optimization of process parameters of three-dimensional needled preforms for C/C-SiC composites ----------------------------------------------------------------------------------------QI Yun-chao, FANG Guo-dong, LIANG Jun, XIE Jun-bo(27) |
| Coarse-grained model and force field development for predicting phase change and thermal transport in polyethylene ----------------------------------------------------------------------------------------CAI Zhuang-li, ZHAO Ling-ling, YU Xi-fan, ChEn Chao(34) |
| Low velocity impact response and post impact compression behaviour of ESTM-fabric/3266 composites ----------------------------------------------------------------------------------------DONG Hui-min, YAN Li, AN Xue-feng QIAN Huang-hai, SU Zheng-tao, YI Xiao-su(41) |
| Modification treatment and properties research of fiber reinforced silicon dioxide composites ----------------------------------------------------------------------------------------ZHANG Bing-ging Y ANG Xiao-bo, SUN Zhi-qiang. MIAO Zhen-jiang. WANG Hua-dong,LYU Yi(48) |
| Mix structure of high nitrogen austenitic stainless steel and 316L stainless steel formed by wire and arc additive manufacturing based on size controlling of beads ----------------------------------------------------------------------------------------YAO Xiang-hong, ZHOU Qi, WANG Ke-hong, ZHANG Xiao-yong(54) |
| Effect of annealing process parameters and properties of base material on magnetic properties of ultra-thin grain-oriented silicon steel strip ----------------------------------------------------------------------------------------TU Yun-chao, HE Cheng-xu, MENG Li, CHEN Leng(61) |
| Microstructure evolution of 022 Cr25Ni7Mo4n duplex stainless steel during isothermal treatment ----------------------------------------------------------------------------------------FENG Han, WANG Bao-shun, WU Xiao-han, WANG Man, NAI Qi-liang, SONG Zhi-gang(70) |
| Effects of check corrosion on high cycle fatigue properties of nickel-base single crystal superalloy ----------------------------------------------------------------------------------------DONG Jian-min, LI Jia-rong, HAN Mei(77) |
| Effect of Sc on microstructure and mechanical properties of Zl205A alloy ----------------------------------------------------------------------------------------LIU Shan-guang, LI Guo-ai, LUO Chuan-biao, LI Hai-chao, L U Zheng, DAI Sheng-long(84) |
| Effect of Ce on microstructure and thermal conductivity of as-cast Mg-6Zn alloy ----------------------------------------------------------------------------------------DAI Xiao-teng, MA Ming-long, ZHANG Kui, LI Yong-jun, YUAN Jia-wei LIU Xiao-dao, WANG Sheng-qing(92) |
| Effect of chlorella vulgaris on corrosion behavior of Mg-3Y-1 5Nd alloy in natural seawater ----------------------------------------------------------------------------------------LIN Meng-xiao, ZHANG Jie, JIANG Quan-tong, LI Jia-run, LU Dong-zhu, HOU Bao-rong, SUN Yuan-yuan(98) |
| Comparison on the rolling-sliding dry friction property of az9 1 and az91-y allo ----------------------------------------------------------------------------------------LI Chun-hua. WANG Han HAO Hai(108) |
| Effect of heat treatment temperatures on microstructure and mechanical property of linear friction welded joints of titanium alloys TC17（α+β）/TC17（β） ----------------------------------------------------------------------------------------LI Xiao-hong. ZHANG Yan-hua, LI Zan, LI Ju, ZHANG Tian-cang(115) |
| Performance of PDC-SiBCn ceramic based wireless passive temperature sensor ----------------------------------------------------------------------------------------YU Yu xi, Han Bin(121) |
| AC+Li（NiCoMn）O2/Li4 Ti5 O12 MWCNTs hybr d capacitors ----------------------------------------------------------------------------------------CHEN Wei, suN Xiao-gang, HU Hao, WANG Jie, LI Xu, LIANG Guo-dong, HUANG Ya-pan, WEI Cheng-cheng(128) |
| Hydrothermal synthesis and crystal growth mechanism of hydroxyapatite nanorods ----------------------------------------------------------------------------------------JIAO Hua, ZHAO Kang, SHI Rui, MA Li-ning, BIAN Tie-rong, TANG Yu-fei(136) |
| Fabrication of hierarchical micro/ nano structure surface on copper by EDM and its hydrophobicity ----------------------------------------------------------------------------------------HE Zhao-rong, JIE Xiao-hua, LIAN Wei-qi(144) |
| Vible light photocatalytic properties of SmFeO3 powders prepared via carbon adsorption co-precipitation method ----------------------------------------------------------------------------------------LI Jin-xing, WANG Qiao-xian, GUO Gui-bao, LIU Jin-yan(150) |
| Preparation and characterization of diatom-based As（V） surface imprinted materials ----------------------------------------------------------------------------------------LIANG Xiao-ming, ZHONG Yi-jian, MA Li-li, LI Cong, CHEN Nan-chun, XIE Qing-lin(156) |