材料工程2018年6期目录

目次
 
综述
 
 
纳米纸衬底的制备、性能及其在柔性电子器件中的应用
----------------------------------------------------------------------------------------陈 港,彭从星,况宇迪,曾 勇,朱朋辉,姚日晖,宁洪龙,方志强(1)
 
 
锆合金中的氢化物相及氢化物取向
----------------------------------------------------------------------------------------曾 文,栾佰峰,刘 娜(11)
 
 
聚变堆结构材料辐照性能的评价
----------------------------------------------------------------------------------------何 培,姚伟志,吕建明,张向东(19)
 
 
研究论文
 
 
基于Pt/CNTs催化剂的燃料电池Pt/buckypaper催化层的制备与表征
----------------------------------------------------------------------------------------朱诗尧,李 平,叶黎城,郑俊生,高 源(27)
 
 
Y掺杂量对N-BiVO4可见光催化活性的影响
----------------------------------------------------------------------------------------王 敏,韩 进,张 宇,由美雁,杨光俊,柴天昱,朱 彤(36)
 
 
空心球Fe3O4 & 海绵状碳复合材料制备及其电化学性能表征
----------------------------------------------------------------------------------------杨 朝,杨金萍,王 静,姚少巍,刘 刚(43)
 
 
共掺浓度对Na-Al共掺杂ZnO薄膜微观结构和光电性能的影响
----------------------------------------------------------------------------------------陈义川,胡跃辉,胡克艳,张效华,童 帆,帅伟强,劳子轩(51)
 
 
ZL114A合金冷态焊接微观组织与力学性能
----------------------------------------------------------------------------------------樊振中,万 佟,王端志,王鲲鹏,王胜强,贺笃鹏(57)
 
 
弥散相对3003铝合金再结晶晶粒尺寸的影响
----------------------------------------------------------------------------------------黄元春,许天成,肖政兵,任贤魏,贾广泽(65)
 
 
稀土Gd对AZ31镁合金耐蚀性能的影响
----------------------------------------------------------------------------------------刘 军,张金玲,渠治波,于彦冲,许并社,王社斌(73)
 
 
镍基617合金动态再结晶微观组织演变与预测
----------------------------------------------------------------------------------------朱怀沈,聂义宏,赵 帅,王宝忠(80)
 
 
海洋污损生物的附着对Q235碳钢表面阴极保护钙质沉积层形成的影响
----------------------------------------------------------------------------------------李晓龙,张 杰,张 鑫,汪江伟,徐会会,段继周,侯保荣(88)
 
 
回流冷却与等温时效过程中Sn-35Bi-1Ag/Ni-P/Cu焊点组织演变
----------------------------------------------------------------------------------------卢汉桥,李玉龙,余 啸,龙维峰,江建锋(95)
 
 
碳纤维表面涂层对碳纤维增强锂铝硅玻璃陶瓷复合材料热导率的影响
----------------------------------------------------------------------------------------于长清,陈 利,裴雨辰(101)
 
 
LaPO4涂层对C纤维增强SiBCN陶瓷基复合材料性能的影响
----------------------------------------------------------------------------------------谭 僖,刘 伟,曹腊梅,戴圣龙(106)
 
 
表面改性芳纶纤维/R-PET复合材料的制备及性能
----------------------------------------------------------------------------------------李雅泊,曹宁宁,郑玉婴,郑文庆(113)
 
 
树脂基复合材料表面爆炸喷涂铝涂层性能研究
----------------------------------------------------------------------------------------崔永静,郝晶莹,王长亮,宇 波,汤智慧(120)
 
 
PMN/CB/PF/IIR复合材料制备及其阻尼性能
----------------------------------------------------------------------------------------李 建,杜 明,黄志雄(125)
 
 
三维四向编织复合材料力学性能预测及实验验证
----------------------------------------------------------------------------------------许善迎,谭焕成,关玉璞,刘璐璐(132)
 
 
基于改进主成分分析法的低密度聚乙烯光氧老化行为及综合评价模型
----------------------------------------------------------------------------------------代 军,晏 华,桑练勇,胡志德,张寒松(141)
 
 
CONTENTS
 
REVIEW
 
 
Preparation,Properties and Applications of Nanopaper Substrates for Flexible Electronics
----------------------------------------------------------------------------------------CHEN Gang,PENG Cong-xing,KUANG Yu-di,ZENG Yong,ZHU Peng-hui,YAO Ri-hui, NING Hong-long,FANG Zhi-qiang(1)
 
 
Hydride Phases and Hydride Orientation in Zirconium Alloys
----------------------------------------------------------------------------------------ZENG Wen,LUAN Bai-feng,LIU Na(11)
 
 
Evaluation of Irradiation Properties for Fusion Structural Materials
----------------------------------------------------------------------------------------HE Pei,YAO Wei-zhi,LYU Jian-ming,ZHANG Xiang-dong(19)
 
 
RESEARCH ARTICLE
 
 
Preparation and Characterization of Pt/Buckypaper Catalytic Layer Based on Pt/CNTs Catalyst for Fuel Cells
----------------------------------------------------------------------------------------ZHU Shi-yao,LI Ping,YE Li-cheng,ZHENG Jun-sheng,GAO Yuan(27)
 
 
Effects of Y Doping Content on Visible-light Photocatalytic Property of N-BiVO4
----------------------------------------------------------------------------------------WANG Min,HAN Jin,ZHANG Yu,YOU Mei-yan,YANG Guang-jun,CHAI Tian-yu,ZHU Tong(36)
 
 
Preparation of Hollow Fe3O4 Nanospheres & Spongy Carbon Composite and Its Characterization of Electrochemical Performance
----------------------------------------------------------------------------------------YANG Zhao,YANG Jin-ping,WANG Jing,YAO Shao-wei,LIU Gang(43)
 
 
Effect of Co-doped Concentration on Microstructure and Photoelectric Properties of Na-Al Co-doped ZnO Thin Films
----------------------------------------------------------------------------------------CHEN Yi-chuan,HU Yue-hui,HU Ke-yan,ZHANG Xiao-hua,TONG Fan,SHUAI Wei-qiang,LAO Zi-xuan(51)
 
 
Microstructures and Mechanical Properties of ZL114A Alloy Under Cold Welding State
----------------------------------------------------------------------------------------FAN Zhen-zhong,WAN Tong,WANG Duan-zhi,WANG Kun-peng,WANG Sheng-qiang,HE Du-peng(57)
 
 
Effect of Dispersed Precipitates on Recrystallized Grain Size of 3003 Aluminum Alloy
----------------------------------------------------------------------------------------HUANG Yuan-chun,XU Tian-cheng,XIAO Zheng-bing,REN Xian-wei,JIA Guang-ze(65)
 
 
Effect of Rare Earth Gd on Corrosion Resistance of AZ31 Magnesium Alloy
----------------------------------------------------------------------------------------LIU Jun,ZHANG Jin-ling,QU Zhi-bo,YU Yan-chong,XU Bing-she,WANG She-bin(73)
 
 
Microstructure Evolution and Prediction of Alloy 617 During Hot Deformation Based on Dynamic Recrystallization
----------------------------------------------------------------------------------------ZHU Huai-shen,NIE Yi-hong,ZHAO Shuai,WANG Bao-zhong(80)
 
 
Effect of Marine Fouling Organisms Adhesion on Formation of Calcareous Deposits Formed by Cathodic Protection on Surface of Q235 Carbon Steel
----------------------------------------------------------------------------------------LI Xiao-long,ZHANG Jie,ZHANG Xin,WANG Jiang-wei,XU Hui-hui,DUAN Ji-zhou,HOU Bao-rong(88)
 
 
Microstructure Evolution of Sn-35Bi-1Ag/Ni-P/Cu Solder Joints During Post-reflow Cooling and Isothermal Aging
----------------------------------------------------------------------------------------LU Han-qiao,LI Yu-long,YU Xiao,LONG Wei-feng,JIANG Jian-feng(95)
 
 
Effect of Carbon Fiber Coating on Thermal Conductivity of Carbon Fiber Reinforced Lithium Alumina Silicate Glass-ceramics Composites
----------------------------------------------------------------------------------------YU Chang-qing,CHEN Li,PEI Yu-chen(101)
 
 
Effects of LaPO4 Coating on Properties of Carbon Fiber Reinforced SiBCN Ceramic Matrix Composites
----------------------------------------------------------------------------------------TAN Xi, LIU Wei, CAO La-mei, DAI Sheng-long(106)
 
 
Preparation and Properties of Composites of R-PET and Surface Modified Aramid Fiber
----------------------------------------------------------------------------------------LI Ya-bo,CAO Ning-ning,ZHENG Yu-ying,ZHENG Wen-Qing(113)
 
 
Characteristics of Al Coatings Fabricated by Detonation Gun Spray on Polymer-based Composites
----------------------------------------------------------------------------------------CUI Yong-jing,HAO Jing-ying,WANG Chang-liang,YU Bo,TANG Zhi-hui(120)
 
 
Preparation and Damping Properties of PMN/CB/PF/IIR Composite
----------------------------------------------------------------------------------------LI Jian,DU Ming,HUANG Zhi-xiong(125)
 
Predication and Experimental Verification on Mechanical Properties of Three-dimensional and Four-direction Braided Composites
----------------------------------------------------------------------------------------XU Shan-ying,TAN Huan-cheng,GUAN Yu-pu,LIU Lu-lu(132)
 
Photo-oxidative Degradation Behavior and Comprehensive Evaluation Model of LDPE Based on Improving Principal Components Analysis
----------------------------------------------------------------------------------------DAI Jun,YAN Hua,SANG Lian-yong,HU Zhi-de,ZHANG Han-song(141)