材料工程2018年9期目录

目次
 
综述
 
 
结构-导电复合材料研究进展
----------------------------------------------------------------------------------------程成,贺德龙,崔 溢(1)
 
 
催化阻燃聚合物的研究进展
----------------------------------------------------------------------------------------吴 笑,许 博,朱向东,辛 菲,钱立军,刘吉平(14)
 
 
锂离子电池正极材料表面包覆改性研究进展
----------------------------------------------------------------------------------------李高锋,李智敏,宁 涛,张茂林,闫养希,向黔新(23)
研究论文
 
 
碳纳米管纤维力-电耦合效应的实验研究
----------------------------------------------------------------------------------------刘扶庆,刘 夏,杨庆生(31)
 
 
Ag2CO3/Ag/g-C3N4 Z-型异质结的制备及可见光催化降解RhB
----------------------------------------------------------------------------------------王 娟,王国宏,孙玲玲(39)
 
 
MWNTs对MWNTs/Fe2O3光催化性能的影响
----------------------------------------------------------------------------------------李 军,刘祥萱,柴 云,刘 渊,张浪浪(46)
 
 
液相共沉淀法制备MnO2/CNFs催化剂及其低温脱硝性能
----------------------------------------------------------------------------------------邹海强,杨隽逸,郑玉婴,陈 健,卢秀恋(53)
不同氟源对FTO薄膜性能影响及其作用机理
----------------------------------------------------------------------------------------樊 琳,许珂敬,史晓慧,贾雨辉,张 衡, 魏春城(59)
 
 
复合材料基片式光纤光栅传感器的制造与性能
----------------------------------------------------------------------------------------高琳琳,王庆林,郭云力,叶 慧,姜明顺,贾玉玺(65)
 
 
Ni含量对钒钛磁铁矿原位合成制备铁基摩擦材料的影响
----------------------------------------------------------------------------------------税 玥,冯可芹,岳慧芳,张燕燕,严子迪(73)
 
 
微弧氧化处理镁合金在接骨板服役工况下的微动磨损特性
----------------------------------------------------------------------------------------周梦林,饶少凯,周 均,郑照县,肖 衡,郑 靖(80)
 
 
超微坡缕石/Cu复合粉体作为润滑油添加剂的摩擦学性能
----------------------------------------------------------------------------------------吴雪梅,杨 绿,周元康,曹 阳(88)
 
 
含硫代磷酸铵盐润滑油在电磁场作用下的摩擦学性能
----------------------------------------------------------------------------------------江泽琦,冯彦寒,方建华,刘 坪,陈波水,谷科城,吴 江(95)
 
 
响应面法对一种新型摩擦材料的性能优化及其磨损机理
----------------------------------------------------------------------------------------徐 祥,杨 明,梁益龙,张世伟,龚乾江(101)
 
 
Mg含量对亚快速凝固Al-Zn-Mg-Cu-Zr合金组织与性能的影响
----------------------------------------------------------------------------------------黄高仁,孙乙萌,张 利,刘玉林(109)
 
 
Cr含量对Ti5Mo5V3Al-Cr系合金等温相变动力学和TTT图的影响
----------------------------------------------------------------------------------------吴 楠,崔雪飞,魏衍广,陶海明,罗 峥(115)
 
 
铬对高钒耐磨合金凝固组织和耐磨性能的影响
----------------------------------------------------------------------------------------杨勇维,符寒光,鞠 江,王开明,雷永平,朱礼龙,江 亮(122)
 
 
8Cr4Mo4Ni4V航空轴承钢高温奥氏体晶粒长大的数学模型
----------------------------------------------------------------------------------------蔡 欣,孙明月,王 卫,康秀红,李殿中(131)
 
 
钛-钢爆炸复合板熔焊对接过渡层焊接材料
----------------------------------------------------------------------------------------史倩茹,张 敏,吴伟刚(138)
 
 
铝合金超疏水转化膜的制备与性能
----------------------------------------------------------------------------------------万 闪,姜 丹,蔡光义,廖圣智,董泽华(144)
 
 
应力载荷作用下5A06铝合金薄板材料在盐水中腐蚀行为
----------------------------------------------------------------------------------------马慧媛,刘慧丛,石文静,施丽铭,李卫平,朱立群(152)
 
 
CONTENTS
 
REVIEW
 
 
Research Progress in Electrically Conductive Structural Composites
----------------------------------------------------------------------------------------WANG Cheng-cheng,HE De-long,CUI Yi(1)
 
 
Research Progress of Catalytic Flame Retardant Polymers
----------------------------------------------------------------------------------------WU Xiao,XU Bo,ZHU Xiang-dong,XIN Fei,QIAN Li-jun,LIU Ji-ping(14)
 
 
Research Progress of Cathode Materials Modified by Surface Coating for Lithium Ion Batteries
----------------------------------------------------------------------------------------LI Gao-feng,LI Zhi-min,NING Tao,ZHANG Mao-lin,YAN Yang-xi,XIANG Qian-xin(23)
 
 
RESEARCH ARTICLE
 
 
Experimental Research on Electro-mechanical Coupling Effects of Carbon Nanotubes Fibers
----------------------------------------------------------------------------------------LIU Fu-qing,LIU Xia,YANG Qing-sheng(31)
 
 
Preparation of Ag2CO3/Ag/g-C3N4 Z-scheme Heterostructure and Photocatalytic Degradation of Rhodamine B Under Visible Light
----------------------------------------------------------------------------------------WANG Juan,WANG Guo-hong,SUN Ling-ling(39)
 
 
Effect of MWNTs on Photocatalytic Performance of MWNTs/Fe2O3
----------------------------------------------------------------------------------------LI Jun,LIU Xiang-xuan,CHAI Yun,LIU Yuan,ZHANG Lang-lang(46)
 
 
Preparation of MnO2/CNFs by Liquid Phase Coprecipitation Method and Its Performance in Low-temperature Denitrification
----------------------------------------------------------------------------------------ZOU Hai-qiang,YANG Jun-yi,ZHENG Yu-ying,CHEN Jian,LU Xiu-lian(53)
 
 
Effect of Different Fluorine Sources on Properties of the FTO Films and Its Mechanism of Action
----------------------------------------------------------------------------------------FAN Lin,XU Ke-jing,SHI Xiao-hui,JIA Yu-hui,ZHANG Heng,WEI Chun-cheng(59)
 
 
Fabrication and Performance of Optical Fiber Grating Sensors Packaged in Composite Substrate
----------------------------------------------------------------------------------------GAO Lin-lin,WANG Qing-lin,GUO Yun-li,YE Hui,JIANG Ming-shun,JIA Yu-xi(65)
 
 
Effect of Ni Content on Iron-based Friction Material Prepared by In-situ Synthesized from Vanadium-bearing Titanomagnetite Concentrates
----------------------------------------------------------------------------------------SHUI Yue,FENG Ke-qin,YUE Hui-fang,ZHANG Yan-yan,YAN Zi-di(73)
 
 
Fretting Wear Properties of Micro-arc Oxidation Treated Magnesium Alloy Under Condition of Simulated Bone Plate-screw Service
----------------------------------------------------------------------------------------ZHOU Meng-lin,RAO Shao-kai,ZHOU Jun, ZHENG Zhao-xian,XIAO Heng,ZHENG Jing(80)
 
 
Tribological Properties of Ultrafine-palygorskite/Copper Composite Powder as Lubricant Additive
----------------------------------------------------------------------------------------WU Xue-mei,YANG Lu,ZHOU Yuan-kang,CAO Yang(88)
 
 
Tribological Characteristics of Lubricating Oils with Ammonium Thiophosphate Under Electromagnetic Field
----------------------------------------------------------------------------------------JIANG Ze-qi,FENG Yan-han,FANG Jian-hua,LIU Ping,CHEN Bo-shui,GU Ke-cheng,WU Jiang(95)
 
 
Optimization of Tribological Properties and Its Wear Mechanism of a New Type Friction Materials with Response Surface Methodology
----------------------------------------------------------------------------------------XU Xiang,YANG Ming,LIANG Yi-long,ZHANG Shi-wei, GONG Qian-jiang(101)
 
 
Effect of Mg Content on Microstructure and Properties of Near-rapidly Solidified Al-Zn-Mg-Cu-Zr Alloys
----------------------------------------------------------------------------------------HUANG Gao-ren,SUN Yi-meng,ZHANG Li,LIU Yu-lin(109)
 
 
Effect of Cr Content on Isothermal Transformation Kinetics and TTT Diagram of Ti5Mo5V3Al-Cr Alloys
----------------------------------------------------------------------------------------WU Nan,CUI Xue-fei,WEI Yan-guang,TAO Hai-ming,LUO Zheng(115)
 
 
Effect of Chromium on Solidification Microstructure and Wear Property of High Vanadium Wear-resistant Alloy
----------------------------------------------------------------------------------------YANG Yong-wei,FU Han-guang,JU Jiang,WANG Kai-ming, LEI Yong-ping,ZHU Li-long,JIANG Liang(122)
 
 
Mathematical Models of Austenite Grain Growth of 8Cr4Mo4Ni4V Aviation Bearing Steel at High Temperature
----------------------------------------------------------------------------------------CAI Xin,SUN Ming-yue,WANG Wei,KANG Xiu-hong,LI Dian-zhong(131)
 
 
Transition Layer Welding Materials of Fusion Welding Joint for Titanium-steel Explosive Composite Plate
----------------------------------------------------------------------------------------SHI Qian-ru,ZHANG Min,WU Wei-gang(138)
 
 
Preparation and Properties of Superhydrophobic Conversion Film on Aluminium Alloy
----------------------------------------------------------------------------------------WAN Shan,JIANG Dan,CAI Guang-yi,LIAO Sheng-zhi,DONG Ze-hua(144)
 
 
Corrosion Behaviors of 5A06 Aluminum Alloy Sheet Under Stress Loading in Brine Solution
----------------------------------------------------------------------------------------MA Hui-yuan,LIU Hui-cong,SHI Wen-jing,SHI Li-ming,LI Wei-ping,ZHU Li-qun(152)