材料工程2017年8期目录

目次
 
研究论文
 
 
热可逆自修复聚氨酯弹性体的制备及表征
----------------------------------------------------------------------------------------杨一林,卢 珣,王巍巍,蒋智杰(1)
 
 
原子氧对石墨烯膜电阻的影响刘宇明
----------------------------------------------------------------------------------------李 蔓,刘向鹏,张 凯,赵春晴(9)
 
 
溶胶-凝胶法制备xLa-3%In-TiO2光催化材料曲家惠
----------------------------------------------------------------------------------------陈金垒,李 红,张文杰(14)
 
 
退火条件对Sn掺杂ZnO薄膜光电性能的影响
----------------------------------------------------------------------------------------刘 涛,赵小如,蒋显武(19)
 
 
基于RBF网络优化制备均匀粒度分布的微米级SiO2基相变调湿复合材料
----------------------------------------------------------------------------------------张 浩(24)
 
 
Al-Ti体系原位合成Al3Ti/ADC12复合材料
----------------------------------------------------------------------------------------熊俊杰,闫 洪(30)
 
 
两种双基体C/C复合材料的微观结构与力学性能
----------------------------------------------------------------------------------------刘 皓,李克智(38)
 
 
后热处理对Cf/ZrC复合材料微观结构及性能的影响
----------------------------------------------------------------------------------------陈红梅,祝玉林,王 松(43)
 
 
MAP-POSS/不饱和环氧树脂混杂光固化膜制备与性能
----------------------------------------------------------------------------------------侯桂香,谢建强,李婷婷,高俊刚,常 娇(49)
 
 
热塑性树脂含量对CCF800H碳纤维环氧复合材料Ⅰ型层间断裂韧度的影响
----------------------------------------------------------------------------------------钟翔屿,张代军,包建文,李伟东(55)
 
 
不同类型颗粒混合增强铁基复合材料的磨损性能
----------------------------------------------------------------------------------------曹新建,金剑锋,曹敬袆,宗亚平(62)
 
 
 
2A12铝合金的多轴加载疲劳行为
----------------------------------------------------------------------------------------陈亚军,王先超,王付胜,刘 波(68)
 
 
5083铝合金热压缩流变应力曲线修正与本构方程
----------------------------------------------------------------------------------------付 平,刘 栩,戴青松,张佳琪,邓运来(76)
 
 
Fe30Mn5Al合金氧化改性层的电化学腐蚀性能
----------------------------------------------------------------------------------------朱雪梅,张振卫,王新建,张彦生(83)
 
 
反应堆压力容器用SA508Gr.4N钢的热变形行为
----------------------------------------------------------------------------------------杨志强,刘正东,何西扣,刘 宁(88)
 
 
基于应力松弛实验对服役25Cr35Ni型耐热钢的高温性能评估
----------------------------------------------------------------------------------------许 军,李会芳,程从前,曹铁山,赵 杰(96)
 
 
综述
 
 
纳米多层结构实现硬质薄膜韧化的方法、机理与应用
----------------------------------------------------------------------------------------杜 军,朱晓莹,王红美(102)
 
 
生物质基SiC陶瓷制备的研究进展
----------------------------------------------------------------------------------------崔贺帅,郑 彧,刘杏娥,杨淑敏,田根林,马建锋(115)
 
 
铝合金表面特性对其胶接性能影响的研究进展
----------------------------------------------------------------------------------------王 询,林建平,万海浪(123)
 
 
量子点敏化太阳能电池光阳极的研究进展
----------------------------------------------------------------------------------------李智敏,李钊颖,张茂林,王 媛,黄云霞(132)
 
CONTENTS
 
RESEARCH ARTICLE
 
 
Preparation and Characterization of Thermally Reversible Self-healing Polyurethane Elastomer
----------------------------------------------------------------------------------------YANG Yi-lin,LU Xun,WANG Wei-wei,JIANG Zhi-jie(1)
 
 
Effect of Atomic Oxygen on Electric Properties of Graphene Films
----------------------------------------------------------------------------------------LIU Yu-ming,LI Man,LIU Xiang-peng,ZHANG Kai,ZHAO Chun-qing(9)
 
 
xLa-3%In-TiO2 Photocatalytic Material Prepared by Sol-gel Method
----------------------------------------------------------------------------------------QU Jia-hui,CHEN Jin-lei,LI Hong,ZHANG Wen-jie(14)
 
 
Influence of Different Annealing Conditions on Optical and Electrical Properties of Sn Doped ZnO Thin Films
----------------------------------------------------------------------------------------LIU Tao,ZHAO Xiao-ru,JIANG Xian-wu(19)
 
 
Optimizing Preparation of Micron SiO2-based Phase Change and Humidity Controlling Composites with Uniform Particle Size Distribution Based on RBF Neural Network
----------------------------------------------------------------------------------------ZHANG Hao(24)
 
 
In-situ Al3Ti/ADC12 Composites Synthesized from Al-Ti System
----------------------------------------------------------------------------------------XIONG Jun-jie,YAN Hong(30)
 
 
Microstructure and Mechanical Properties of Two Kinds of Dual-matrix C/C Composites
----------------------------------------------------------------------------------------LIU Hao,LI Ke-zhi(38)
 
 
Effect of Post Heat Treatment on Microstructure and Properties of Cf/ZrC Composites
----------------------------------------------------------------------------------------CHEN Hong-mei,ZHU Yu-lin,WANG Song(43)
 
 
Preparation and Properties of MAP-POSS/Unsaturated Epoxy Resin Hybrid Ultraviolet Light Cured Film
----------------------------------------------------------------------------------------HOU Gui-xiang,XIE Jian-qiang,LI Ting-ting,GAO Jun-gang,CHANG Jiao(49)
 
 
Influence of Content of Toughening Thermoplastic on Mode-Ⅰ Interlaminar Fracture Toughness of Epoxy Composite Reinforced by CCF800H Carbon Fiber
----------------------------------------------------------------------------------------ZHONG Xiang-yu,ZHANG Dai-jun,BAO Jian-wen,LI Wei-dong(55)
 
 
Wear Resistance of Iron Matrix Composites Reinforced by Mixed-type Particles
----------------------------------------------------------------------------------------CAO Xin-jian,JIN Jian-feng,CAO Jing-yi,ZONG Ya-ping(62)
 
 
Fatigue Behavior of 2A12 Aluminum Alloy Under Multiaxial Loading
----------------------------------------------------------------------------------------CHEN Ya-jun,WANG Xian-chao,WANG Fu-sheng,LIU Bo(68)
 
 
Modification of Flow Stress Curves and Constitutive Equations During Hot Compression Deformation of 5083 Aluminum Alloy
----------------------------------------------------------------------------------------FU Ping,LIU Xu,DAI Qing-song,ZHANG Jia-qi,DENG Yun-lai(76)
 
 
Electrochemical Corrosion Behavior of Oxidation Layer on Fe30Mn5Al Alloy
----------------------------------------------------------------------------------------ZHU Xue-mei,ZHANG Zhen-wei,WANG Xin-jian,ZHANG Yan-sheng(83)
 
 
Hot Deformation Behavior of SA508Gr.4N Steel for Reactor Pressure Vessels
----------------------------------------------------------------------------------------YANG Zhi-qiang,LIU Zheng-dong,HE Xi-kou,LIU Ning(88)
 
 
High Temperature Performance Evaluation of As-serviced 25Cr35Ni Type Heat-resistant Steel Based on Stress Relaxation Tests
----------------------------------------------------------------------------------------XU Jun,LI Hui-fang,CHENG Cong-qian,CAO Tie-shan,ZHAO Jie(96)
 
 
REVIEW
 
 
Nano Multilayer Structure Toughening of Hard Coatings—Method, Mechanism and Application
----------------------------------------------------------------------------------------DU Jun,ZHU Xiao-ying,WANG Hong-me(102)
 
Research Progress on Preparation for Biomass-based SiC Ceramic
----------------------------------------------------------------------------------------CUI He-shuai,ZHENG Yu,LIU Xing-e,YANG Shu-min,TIAN Gen-lin,MA Jian-feng(115)
 
Research Progress in Effect of Aluminum Surface Properties on Adhesively Bonded Performance
----------------------------------------------------------------------------------------WANG Xun,LIN Jian-ping,WAN Hai-lang(123)
 
 
Research Progress of Photoanodes for Quantum Dot Sensitized Solar Cells
----------------------------------------------------------------------------------------LI Zhi-min,LI Zhao-ying,ZHANG Mao-lin,WANG Yuan,HUANG Yun-xia(132)