材料工程2019年12期目录

目次
 
综 述
 
 
生物基合成橡胶的研究进展
----------------------------------------------------------------------------------------吉海军,乔 荷,王 朝,杨 慧,王润国,张立群(1)
 
 
MXenes二维纳米材料及其在锂离子电池中的应用研究进展
----------------------------------------------------------------------------------------齐 新,陈 翔,彭思侃,王继贤,王 楠,燕绍九(10)
 
 
六方氮化硼的液相剥离及其在电子器件热管理应用的研究进展
----------------------------------------------------------------------------------------孙 川,邱学青,覃发梅,丁子先,方志强(21)
 
 
功能性POSS制备的研究进展
----------------------------------------------------------------------------------------刘昊东,朱光明,任天宁(33)
 
 
碳基/羰基铁复合吸波材料的研究进展
----------------------------------------------------------------------------------------葛超群,汪刘应,刘 顾(43)
 
研究论文
 
 
扫描路径对激光立体成形TC4构件热-力场的影响
----------------------------------------------------------------------------------------鹿旭飞,林 鑫,马 良,曹 阳,黄卫东(55)
 
 
固溶时效深冷复合处理对ZCuAl10Fe3Mn2合金微观组织和热疲劳性能的影响
----------------------------------------------------------------------------------------赵 玲,刘光磊,张思源,李茂军,刘简宁,李明辉(63)
 
 
Al0.26CoCrFeNiMn高熵合金再结晶组织演变超声表征
----------------------------------------------------------------------------------------丁 宁,金士杰,彭良明,雷明凯,林 莉(71)
 
 
超声外场对原位TiB2/2A14铝基复合材料的摩擦磨损性能的影响
----------------------------------------------------------------------------------------黄 凯,蒋日鹏, 李晓谦,李瑞卿,张立华(78)
 
 
多道次热挤压制备Al2O3/AZ31复合材料的微观组织与力学性能
----------------------------------------------------------------------------------------魏帅虎,胡茂良,吉泽升,许红雨,王 晔(85)
 
 
预变形对2050铝锂合金晶粒细化及超塑性的影响
----------------------------------------------------------------------------------------叶凌英, 孙 泉, 李红萍, 刘胜胆, 张新明(92)
 
 
时效工艺对2124铝合金厚板组织与性能的影响
----------------------------------------------------------------------------------------臧金鑫,陈军洲,伊琳娜,汝继刚(98)
 
 
氧化石墨烯复合二氧化钛光催化剂的制备及模拟染料废水处理
----------------------------------------------------------------------------------------李丹丹,姚广铮,梁桂琰,荣旭发,薛若雨,付忠田(104)
 
 
SiO2光子晶体结构色薄膜的制备与光学性能研究
----------------------------------------------------------------------------------------杜宏艳,戚宇帆,吴晨雪,刘玥君,梁丽萍, 郭文英,张子栋(111)
 
 
电纺Co掺杂碳纳米纤维的制备及其吸波性能
----------------------------------------------------------------------------------------张 飒,王建江,赵 芳,刘嘉玮(118)
 
 
快速膨胀海藻酸钠/二氧化硅纤维复合支架的制备及其快速止血功能的应用
----------------------------------------------------------------------------------------舒华金,吴春萱,杨 康,刘廷武,李 晨,曹传亮(124)
 
 
溶胶-凝胶法制备金刚石/陶瓷结合剂复合烧结体及其性能表征
----------------------------------------------------------------------------------------洪 秋,万 隆,李建伟(130)
 
 
高比表面积、低密度块状Al2O3气凝胶的制备及表征
----------------------------------------------------------------------------------------余煜玺,马 锐,王贯春,张瑞谦,彭小明(136)
 
 
混杂光固化3D打印树脂固化动力学性能
----------------------------------------------------------------------------------------林广鸿, 尹敬峰, 黄 鸿, 黄伟滨, 蔡慕华, 向洪平, 刘晓暄(143)
 
 
短切纤维对复合材料焊接强度的增强作用
----------------------------------------------------------------------------------------崔 旭,赵 普,熊需海,张忠宝,李 书,陈 平(151)
 
 
复合乳化剂作用下相变调湿复合材料的性能和机理
----------------------------------------------------------------------------------------张 浩,李海丽(157)
CONTENTS
 
REVIEW
 
 
Research progress in bio-based synthetic rubber
----------------------------------------------------------------------------------------JI Hai-jun,QIAO He,WANG Zhao,YANG Hui,WANG Run-guo,ZHANG Li-qun(1)
 
 
Research progress on two-dimensional nanomaterials MXenes and their application for lithium-ion batteries
----------------------------------------------------------------------------------------QI Xin, CHEN Xiang, PENG Si-kan, WANG Ji-xian, WANG Nan, YAN Shao-jiu(10)
 
 
Research progress in liquid phase exfoliation of boron nitride and their applications in thermal management of electronic devices
----------------------------------------------------------------------------------------SUN Chuan, QIU Xue-qing, QIN Fa-mei, DING Zi-xian, FANG Zhi-qiang(21)
 
 
Research progress in preparation of functionalized polyhedral oligomeric silsesquioxanes
----------------------------------------------------------------------------------------LIU Hao-dong, ZHU Guang-ming,REN Tian-ning(33)
 
 
Research progress in carbon-based/carbonyl iron composite microwave absorption materials
----------------------------------------------------------------------------------------GE Chao-qun,WANG Liu-ying,LIU Gu(43)
 
RESEARCH ARTICLE
 
 
Effect of scanning path on thermo-mechanical field of laser solid forming TC4 part
----------------------------------------------------------------------------------------LU Xu-fei,LIN Xin,MA Liang,CAO Yang,HUANG Wei-dong(55)
 
 
Effect of compound cryogenic treatment on microstructure and thermal fatigue properties of ZCuAl10Fe3Mn2 alloy
----------------------------------------------------------------------------------------ZHAO Ling,LIU Guang-lei,ZHANG Si-yuan,LI Mao-jun,LIU Jian-ning,LI Ming-hui(63)
 
 
Ultrasonic characterization of recrystallized microstructure evolution for Al0.26CoCrFeNiMn high-entropy alloys
----------------------------------------------------------------------------------------DING Ning, JIN Shi-jie, PENG Liang-ming, LEI Ming-kai, LIN Li(71)
 
 
Effect of ultrasonic field on friction and wear properties of in-situ TiB2/2A14 composite materials
----------------------------------------------------------------------------------------HUANG Kai,JIANG Ri-peng, LI Xiao-qian, LI Rui-qing, ZHANG Li-hua(78)
 
 
Microstructure and mechanical properties of Al2O3/AZ31 composites prepared by multi-pass hot extrusion
----------------------------------------------------------------------------------------WEI Shuai-hu, HU Mao-liang, JI Ze-sheng, XU Hong-yu, WANG Ye(85)
 
 
Effects of pre-deformation on grain refinement and superplasticity of 2050 Al-Li alloy
----------------------------------------------------------------------------------------YE Ling-ying, SUN Quan, LI Hong-ping, LIU Sheng-dan, ZHANG Xin-ming(92)
 
 
Effect of ageing process on microstructure and properties of 2124 aluminum alloy thick plate
----------------------------------------------------------------------------------------ZANG Jin-xin, CHEN Jun-zhou, YI Lin-na, RU Ji-gang(98)
 
 
Preparation of GO/TiO2 composite photocatalyst and treatment of synthetic dye wastewater
----------------------------------------------------------------------------------------LI Dan-dan, YAO Guang-zheng, LIANG Gui-yan, RONG Xu-fa, XUE Ruo-yu, FU Zhong-tian(104)
 
 
Preparation and optical properties of SiO2 photonic crystal structure color films
----------------------------------------------------------------------------------------DU Hong-yan, QI Yu-fan, WU Chen-xue, LIU Yue-jun, LIANG Li-ping, GUO Wen-ying, ZHANG Zi-dong(111)
 
 
Preparation of Co doped carbon nanofibers composites synthesized by electrospinning and its microwave absorption properties
----------------------------------------------------------------------------------------ZHANG Sa,WANG Jian-jiang,ZHAO Fang,LIU Jia-wei(118)
 
 
Preparation of rapid expansion alginate/silica fiber composite scaffold and application of rapid hemostatic function
----------------------------------------------------------------------------------------SHU Hua-jin, WU Chun-xuan, YANG Kang, LIU Ting-wu, LI Chen, CAO Chuan-liang(124)
 
 
Preparation of diamond/vitrified bond composite sintered by sol-gel method and its performance characterization
----------------------------------------------------------------------------------------HONG Qiu, WAN Long, LI Jian-wei(130)
 
 
Preparation and characterization of Al2O3 bulk aerogel with high specific surface area and low density
----------------------------------------------------------------------------------------YU Yu-xi, MA Rui, WANG Guan-chun, ZHANG Rui-qian, PENG Xiao-ming(136)
 
 
Photocuring kinetics properties of hybrid UV-curing resin for 3D printing
----------------------------------------------------------------------------------------LIN Guang-hong, YIN Jing-feng, HUANG Hong, HUANG Wei-bin, CAI Mu-hua, XIANG Hong-ping, LIU Xiao-xuan(143)
 
 
Enhancement of chopped fibers on welding strength of composites
----------------------------------------------------------------------------------------CUI Xu, ZHAO Pu, XIONG Xu-hai, ZHANG Zhong-bao, LI Shu, CHEN Ping(151)
 
 
Effect of compound emulsifier on properties and mechanism of phase change and humidity controlling composites
----------------------------------------------------------------------------------------ZHANG Hao,LI Hai-li(157)