目次 |
增材制造与再制造专栏 |
高性能金属材料激光增材制造应力变形调控研究现状 ----------------------------------------------------------------------------------------陈 勇,陈 辉,姜亦帅,汪 倩,吴 影,熊 俊,董世运(1) |
4D打印及其关键技术 ----------------------------------------------------------------------------------------沈自才,夏 彦,丁义刚,赵春晴,杨艳斌(11) |
碳纳米管复合材料的3D打印技术研究进展 ----------------------------------------------------------------------------------------鲁 浩,李 楠,王海波,廖帮全,姜亚明,荆妙蕾,徐志伟,陈 莉,张兴祥(19) |
铝合金增材制造技术研究进展 ----------------------------------------------------------------------------------------郜庆伟,赵 健,舒凤远,吕成成,齐宝亮,于治水(32) |
短应力线轧机激光再制造现状及发展趋势 ----------------------------------------------------------------------------------------张 斌,陈岁元,梁 京,刘常升,崔 彤,王 玫(43) |
综 述 |
冷喷涂复合加工制造技术及其应用 ----------------------------------------------------------------------------------------李文亚,曹聪聪,杨夏炜,徐雅欣(53) |
VOCs传感器敏感膜材料及敏感机理研究进展 ----------------------------------------------------------------------------------------沈小群,陈 李,李顺波,徐 溢(64) |
聚合物电解质在超级电容器中的研究进展 ----------------------------------------------------------------------------------------寻之玉,侯 璞,刘 旸,倪守朋,霍鹏飞(71) |
研究论文 |
考虑层间和界面的玻璃纤维/环氧复合材料吸湿扩散实验和仿真 ----------------------------------------------------------------------------------------朱礼宝,戴文喜,李永清,朱 锡,朱子旭(84) |
功能化纳米SiO2改性环氧树脂复合材料及其摩擦磨损行为与机制 ----------------------------------------------------------------------------------------田 晋,高 立,蔡 滨,齐泽昊,谭业发(92) |
黏度可控化制备BPDA-PDA型聚酰亚胺及表征 ----------------------------------------------------------------------------------------倪洪江,邢 宇,戴霄翔,李 军,张代军,杨士勇,陈祥宝(100) |
PtCu/C合金固溶度梯度薄膜催化剂的后处理改性和析氢性能表征 ----------------------------------------------------------------------------------------魏白光,郝鑫禹(107) |
负载高性能MnO2@Ni(OH)2核/壳纳米线阵列碳布电极的非对称超级电容器性能研究 ----------------------------------------------------------------------------------------闫慧君,白建伟,王 玉,周红霞,景晓燕,王 君,白雪峰(115) |
Ba2+在KDP(100)表面吸附的密度泛函理论研究 ----------------------------------------------------------------------------------------刘 峣,武玉琳,屈云鹏,郭文英,梁丽萍(123) |
g-C3N4量子点修饰球形Bi2WO6及其光催化活性增强机制 ----------------------------------------------------------------------------------------郭 莉,张开来,张 鑫,赵芳丽,赵 强,杨 晓,王丹军,付 峰(128) |
烧结温度对大电流电场烧结制备W-Mo-Cu合金的影响 ----------------------------------------------------------------------------------------刘艳芳,冯可芹,周虹伶,柯思璇(135) |
激光熔覆FeCrNiCoCuAlx高熵合金涂层的耐腐蚀与抗冲蚀性能 ----------------------------------------------------------------------------------------鲍亚运,纪秀林,姬翠翠,赵建华,程江波,徐 霖(141) |
钢表面梯度结构耐腐蚀铝涂层的制备及研究 ----------------------------------------------------------------------------------------王 瑶,赵雪妮,党新安,杨 璞,魏森森,张伟刚,刘庆瑶(148) |
转速对铝铜异种材料水下搅拌摩擦焊接接头组织与性能的影响 ----------------------------------------------------------------------------------------王盈辉,王快社,王 文,彭 湃,车倩颖,乔 柯(155) |
5A90铝锂合金超塑性变形机理的定量研究 ----------------------------------------------------------------------------------------叶凌英,杨 栋,李红萍,张新明,廖荣跃(163) |
TB6钛合金疲劳小裂纹扩展行为 ----------------------------------------------------------------------------------------许 良,黄双君,回 丽,王 磊,周 松,赵 晴(171) |
CONTENTS |
ADDITIVE MANUFACTURING & REMANUFACTURING COLUMN |
Research progress in stress and deformation control in laser additive manufacturing for high-performance metals ----------------------------------------------------------------------------------------CHEN Yong,CHEN Hui,JIANG Yi-shuai,WANG Qian,WU Ying,XIONG Jun,DONG Shi-yun(1) |
4D printing and its key technologies ----------------------------------------------------------------------------------------SHEN Zi-cai,XIA Yan,DING Yi-gang,ZHAO Chun-qing,YANG Yan-bin(11) |
Research progress in 3D printing technology for carbon nanotubes composites ----------------------------------------------------------------------------------------LU Hao,LI Nan,WANG Hai-bo,LIAO Bang-quan,JIANG Ya-ming,JING Miao-lei,XU Zhi-wei,CHEN Li,ZHANG Xing-xiang(19) |
Research progress in aluminum alloy additive manufacturing ----------------------------------------------------------------------------------------GAO Qing-wei,ZHAO Jian,SHU Feng-yuan,LYU Cheng-cheng,QI Bao-liang,YU Zhi-shui(32) |
Current status and development trend of laser remanufacturing of short stress path rolling mill ----------------------------------------------------------------------------------------ZHANG Bin,CHEN Sui-yuan,LIANG Jing,LIU Chang-sheng,CUI Tong,WANG Mei(43) |
REVIEW |
Cold spraying hybrid processing technology and its application ----------------------------------------------------------------------------------------LI Wen-ya,CAO Cong-cong,YANG Xia-wei,XU Ya-xin(53) |
Research progress in sensitive membrane materials and adsorption mechanism of VOCs sensors ----------------------------------------------------------------------------------------SHEN Xiao-qun,CHEN Li,LI Shun-bo,XU Yi(64) |
Research progress of polymer electrolytes in supercapacitors ----------------------------------------------------------------------------------------XUN Zhi-yu,HOU Pu,LIU Yang,NI Shou-peng,HUO Peng-fei(71) |
RESEARCH ARTICLE |
Experimental/numerical investigation of moisture diffusion in glass/epoxy composites in consideration of interlamination and interphase ----------------------------------------------------------------------------------------ZHU Li-bao,DAI Wen-xi,LI Yong-qing,ZHU Xi,ZHU Zi-xu(84) |
Tribological behavior and wear mechanism of modified nano-SiO2 reinforced epoxy composites ----------------------------------------------------------------------------------------TIAN Jin,GAO Li,CAI Bin,QI Ze-hao,TAN Ye-fa(92) |
Viscosity-controllable preparation and characterization of BPDA-PDA polyimide ----------------------------------------------------------------------------------------NI Hong-jiang,XING Yu,DAI Xiao-xiang,LI Jun,ZHANG Dai-jun,YANG Shi-yong,CHEN Xiang-bao(100) |
Modification and hydrogen evolution characteristics of post-processing PtCu/C alloy solid solubility gradient membrane catalyst ----------------------------------------------------------------------------------------WEI Bai-guang,HAO Xin-yu(107) |
High performance MnO2@Ni(OH)2 core/shell structure nanowire arrays supported on carbon cloth as advanced electrodes for asymmetric supercapacitors ----------------------------------------------------------------------------------------YAN Hui-jun,BAI Jian-wei,WANG Yu,ZHOU Hong-xia,JING Xiao-yan,WANG Jun,BAI Xue-feng(115) |
Density functional theory study of Ba2+ adsorption on KDP (100) surface ----------------------------------------------------------------------------------------LIU Yao,WU Yu-lin,QU Yun-peng,GUO Wen-ying,LIANG Li-ping(123) |
g-C3N4 quantum dots decorated spherical Bi2WO6 photocatalyst and its enhanced photocatalytic activities mechanism ----------------------------------------------------------------------------------------GUO Li,ZHANG Kai-lai,ZHANG Xin,ZHAO Fang-li,ZHAO Qiang,YANG Xiao,WANG Dan-jun,FU Feng(128) |
Effects of sintering temperature on W-Mo-Cu alloy prepared by large current electric field sintering ----------------------------------------------------------------------------------------LIU Yan-fang,FENG Ke-qin,ZHOU Hong-ling,KE Si-xuan(135) |
Corrosion and slurry erosion properties of FeCrNiCoCuAlx high-entropy alloy coatings prepared by laser cladding -----------------------------------------------------------------------------------------BAO Ya-yun,JI Xiu-lin,JI Cui-cui,ZHAO Jian-hua,CHENG Jiang-bo,XU Lin(141) |
Preparation and research of structure-gradient and corrosion-resistant aluminium coatings on steel surface ----------------------------------------------------------------------------------------WANG Yao,ZHAO Xue-ni,DANG Xin-an,YANG Pu,WEI Sen-sen,ZHANG Wei-gang,LIU Qing-yao(148) |
Effect of rotation speed on microstructure and properties of dissimilar submerged friction stir welding joints of aluminium and pure copper ----------------------------------------------------------------------------------------WANG Ying-hui,WANG Kuai-she,WANG Wen,PENG Pai,CHE Qian-ying,QIAO Ke(155) |
Quantitative study of superplastic deformation mechanism of 5A90 Al-Li alloy ----------------------------------------------------------------------------------------YE Ling-ying,YANG Dong,LI Hong-ping,ZHANG Xin-ming,LIAO Rong-yue(163) |
Small fatigue crack growth behavior of TB6 titanium alloy ----------------------------------------------------------------------------------------XU Liang,HUANG Shuang-jun,HUI Li,WANG Lei,ZHOU Song,ZHAO Qing(171) |