| 目次 |
| 观 点 |
| 一代新材料，一代新型发动机：航空发动机的发展趋势及其对材料的需求 ----------------------------------------------------------------------------------------刘大响(1) |
| 研究论文 |
| 石墨烯/热还原石墨烯的制备及其对重金属Pb2+的吸附性 ----------------------------------------------------------------------------------------王艳春，曾效舒，敖志强，袁秋红，杨文庆，沈佐健(6) |
| 水热法合成铁掺杂的硫化镉及光催化性能 ----------------------------------------------------------------------------------------刘阳龙，郑玉婴，曹宁宁，王 翔(12) |
| Ag/InP复合材料的制备、表征及其性能 ----------------------------------------------------------------------------------------刘淑玲，韩晓莉，仝建波(18) |
| FV520B沉淀硬化不锈钢的MAG堆焊再制造力学特性 ----------------------------------------------------------------------------------------柳 建，朱 胜，蔡志海，张 平，刘 军，秦 航，仝永刚(23) |
| 转速对水下搅拌摩擦焊接7A04-T6铝合金组织与性能的影响 ----------------------------------------------------------------------------------------王 文，李天麒，乔 柯，徐瑞琦，王快社(32) |
| 等离子旋转电极雾化法制备高品质Ti-6.5Al-1.4Si-2Zr-0.5Mo-2Sn合金粉末 ----------------------------------------------------------------------------------------邝泉波，邹黎明，蔡一湘，刘 辛，程 军，易健宏(39) |
| 2219铝合金动态力学性能及其本构关系 ----------------------------------------------------------------------------------------张子群，姜兆亮，魏清月(47) |
| 电流密度对微/纳结构电铸成型模芯质量的影响 ----------------------------------------------------------------------------------------翁 灿，王 飞，杨冬娇，吕 辉，蒋炳炎(52) |
| 含氢硅油制备SiC晶须的研究 ----------------------------------------------------------------------------------------王 瑶，陈 旸，乔 宁，李 欣，张文婷(59) |
| Al-TiO2-C晶粒细化剂对工业纯铝细化效果的影响 ----------------------------------------------------------------------------------------韩小伟，张瑞英，王 鹏(65) |
| 阳极氧化法制备铝基超疏水涂层及其稳定性和耐蚀性的研究 ----------------------------------------------------------------------------------------郑顺丽，李 澄，项腾飞，胡 玮，丁诗炳，王 晶，刘盼金(71) |
| 燃气热循环下7YSZ热障涂层的微结构演变与阻抗谱特征 ----------------------------------------------------------------------------------------陈文龙，刘 敏，张吉阜，宋进兵(79) |
| 采用端面带孔电极进行电火花沉积制备自润滑涂层< ----------------------------------------------------------------------------------------曹同坤，孙 何，王晓明(88) |
| 航空紧固件用Ti-5553合金的组织和性能 ----------------------------------------------------------------------------------------赵庆云，由 洋，王立东，董利民，刘风雷(95) |
| 聚丙烯腈纤维对汽车摩擦材料性能的影响 ----------------------------------------------------------------------------------------刘伯威，李亚林，刘 咏，杨 阳，唐 兵，匡湘铭(103) |
| 电子束辐照诱导丙烯酸接枝尼龙66织物的改性研究 ----------------------------------------------------------------------------------------桑 伟，周 岚，冯新星，张建春(111) |
| CFRP筋拉伸强度预测模型评价及应用 ----------------------------------------------------------------------------------------王 彬，杨勇新，岳清瑞，曾 滨(117) |
| 复合材料胶接修理层合板拉伸性能及影响参数 ----------------------------------------------------------------------------------------聂恒昌，徐吉峰，关志东，黎增山，王 鑫(124) |
| 304奥氏体不锈钢晶间腐蚀敏感性的非线性超声表征 ----------------------------------------------------------------------------------------侯天宇，李 萍，陈 雷，赵 杰，李廷举(132) |
| 充氢Cr-Mo钢变形过程的声发射特征 ----------------------------------------------------------------------------------------滕全全,汪 悦，有移亮,张 峥(138) |
| CONTENTS |
| VIEWPOINT |
| One Generation of New Material, One Generation of New Type Engine：Development Trend of Aero-engine and Its Requirements for Materials ----------------------------------------------------------------------------------------LIU Da-xiang(1) |
| RESEARCH ARTICLE |
| Preparation of Graphene via Thermal Reduction and Its Adsorption Capacity for Heavy Metal Pb2+ ----------------------------------------------------------------------------------------WANG Yan-chun,ZENG Xiao-shu,AO Zhi-qiang,YUAN Qiu-hong,YANG Wen-qing,SHEN Zuo-jian(6) |
| Synthesis and Photocatalytic Activity of Iron Doped CdS by Hydrothermal Method ----------------------------------------------------------------------------------------LIU Yang-long,ZHENG Yu-ying, CAO Ning-ning，WANG xiang(12) |
| Synthesis，Characterization and Properties of Ag/InP Composites ----------------------------------------------------------------------------------------LIU Shu-ling，HAN Xiao-li，TONG Jian-bo(18) |
| Mechanical Characteristic of Remanufacturing of FV520B Precipitation Hardening Stainless Steel Using MAG Surfacing Deposition ----------------------------------------------------------------------------------------LIU Jian,ZHU Sheng,CAI Zhi-hai,ZHANG Ping,LIU Jun,QIN Hang,TONG Yong-gang(23) |
| Effect of Rotation Rate on Microstructure and Properties of Underwater Friction Stir Welded 7A04-T6 Aluminum Alloy ----------------------------------------------------------------------------------------WANG Wen,LI Tian-qi,QIAO Ke,XU Rui-qi,WANG Kuai-she(32) |
| Preparation of High Quality Ti-6.5Al-1.4Si-2Zr-0.5Mo-2Sn Alloy Powder by Plasma Rotating Electrode Process ----------------------------------------------------------------------------------------KUANG Quan-bo,ZOU Li-ming,CAI Yi-xiang,LIU Xin,CHENG Jun,YI Jian-hong(39) |
| Dynamic Mechanical Properties and Constitutive Equations of 2219 Aluminum Alloy ----------------------------------------------------------------------------------------ZHANG Zi-qun,JIANG Zhao-liang,WEI Qing-yue(47) |
| Effect of Current Density on Quality of Electroformed Mold Inserts with Micro/Nano-cavities ----------------------------------------------------------------------------------------WENG Can，WANG Fei，YANG Dong-jiao，LYU Hui，JIANG Bing-yan(52) |
| Research on SiC Whisker Prepared by H-PSO ----------------------------------------------------------------------------------------WANG Yao,CHEN Yang,QIAO Ning,LI Xin,ZHANG Wen-ting(59) |
| Effect of Al-TiO2-C Grain Refiners on Refinement of Industrial Pure Aluminum ----------------------------------------------------------------------------------------HAN Xiao-wei,ZHANG Rui-ying,WANG Peng(65) |
| Fabrication of Aluminum-based Superhydrophobic Coating by Anodization and Research on Stability and Corrosion Resistance ----------------------------------------------------------------------------------------ZHENG Shun-li，LI Cheng，XIANG Teng-fei，HU Wei，DING Shi-bing，WANG Jing，LIU Pan-jin(71) |
| Microstructure Evolution and Impedance Spectroscopy Characterization of Thermal Barrier Coating Exposed to Gas Thermal-shock Environment ----------------------------------------------------------------------------------------CHEN Wen-long,LIU Min,ZHANG Ji-fu,SONG Jin-bing(79) |
| Self-lubricating Coating Prepared by Electro-spark Deposition Using Electrode with Drilled Holes at End Face ----------------------------------------------------------------------------------------CAO Tong-kun，SUN He，WANG Xiao-ming(88) |
| Microstructure and Properties of Ti-5553 Alloy for Aerospace Fasteners ----------------------------------------------------------------------------------------ZHAO Qing-yun,YOU Yang,WANG Li-dong,DONG Li-min,LIU Feng-lei(95) |
| Influences of PAN Fiber on Performance of Automobile Friction Materials ----------------------------------------------------------------------------------------LIU Bo-wei,LI Ya-lin,LIU Yong,YANG Yang,TANG Bing,KUANG Xiang-ming(103) |
| Acrylic Acid Improved Nylon 66 Fabric by Electron Beam Irradiation-induced Grafting ----------------------------------------------------------------------------------------SANG Wei,ZHOU Lan,FENG Xin-xing,ZHANG Jian-chun(111) |
| Evaluation and Application of Tensile Strength Prediction for CFRP Bars ----------------------------------------------------------------------------------------WANG Bin,YANG Yong-xin,YUE Qing-rui,ZENG Bin(117) |
| Tensile Property and Influence Parameters of Bonded Repaired Composite Laminates ----------------------------------------------------------------------------------------NIE Heng-chang,XU Ji-feng,GUAN Zhi-dong,LI Zeng-shan,WANG Xin(124) |
| Nonlinear Ultrasonic Characterization for Intergranular Corrosion Susceptibility of 304 Austenitic Stainless Steel ----------------------------------------------------------------------------------------HOU Tian-yu,LI Ping,CHEN Lei,ZHAO Jie,LI Ting-ju(132) |
| Acoustic Emission Characteristics of Hydrogen Charged Cr-Mo Steel During Deformation ----------------------------------------------------------------------------------------TENG Quan-quan，WANG Yue,YOU Yi-liang，ZHANG Zheng(138) |