材料工程2018年3期目录

目次
 
锂离子电池专栏
 
 
静电纺丝与静电喷雾技术共纺制备PPESK/PVDF复合锂电池隔膜
----------------------------------------------------------------------------------------龚文正,周晶晶,阮诗伦,申长雨(1)
 
 
EVOH-SO3Li/PET电纺锂离子电池隔膜电化学性能
----------------------------------------------------------------------------------------巩桂芬,王 磊,兰  健(7)
 
 
3D 打印柔性可穿戴锂离子电池
----------------------------------------------------------------------------------------王一博,赵九蓬(13)
 
 
研究论文
 
 
放电等离子烧结对TiB2/AlCoCrFeNi复合材料组织与性能的影响
----------------------------------------------------------------------------------------肖代红,刘  彧,余永新,周鹏飞,刘文胜,马运柱(22)
 
 
不同填料复配对尼龙6/石墨烯复合材料导热性能的影响
----------------------------------------------------------------------------------------宋  娜,崔思奇,焦德金,侯兴双,刘建影,丁  鹏,施利毅(28)
 
 
骨组织工程用硅胶/掺锶β-磷酸三钙/硫酸钙复合多孔支架的制备与性能研究
----------------------------------------------------------------------------------------秦晓素,黄  洁,郭华超,杨泽斌,陈庆华,颜廷亭(34)
 
 
树脂基Fe纳米粒子及碳纤维复合吸波平板的制备与性能
----------------------------------------------------------------------------------------周远良,赛义德,张  黎, 贾韦迪,段玉平,董星龙(41)
 
 
B4CP /PI聚酰亚胺复合薄膜耐高温及热中子辐照屏蔽性能研究
----------------------------------------------------------------------------------------李晓敏,吴菊英,唐昶宇,袁  萍,邢  涛,张  凯,梅  军,黄渝鸿(48)
 
 
搅拌摩擦焊辅助Al/Zn/Mg接头扩散连接
----------------------------------------------------------------------------------------金玉花,甘瑞根,陈  飞,邵庆丰,王希靖,郭廷彪(55)
 
 
紫铜/Al2O3陶瓷/不锈钢复合结构钎焊接头残余应力研究
----------------------------------------------------------------------------------------刘  多,刘景和,周英豪,宋晓国,牛红伟,冯吉才(61)
 
 
锌基体疏液表面的制备及润湿行为
----------------------------------------------------------------------------------------韩祥祥,于思荣,李  好(67)
 
 
脉冲宽度对激光熔覆FeSiB涂层组织与硬度的影响
----------------------------------------------------------------------------------------龚玉兵,王善林,李宏祥,柯黎明,陈玉华,马  彬(74)
 
 
双向脉冲快速电沉积非晶态Ni-P/Al2O3复合镀层
----------------------------------------------------------------------------------------彭秋艳,费敬银,陈居田,赵非凡,冯  旭(81)
 
 
Zn-Al-Mg-RE涂层在含SRB海水中的耐腐蚀性与机理
----------------------------------------------------------------------------------------龙伟漾,吴玉萍,高文文,洪  晟(91)
 
 
稀土元素对原位合成TiB2/Al复合材料的组织和性能的影响
----------------------------------------------------------------------------------------屈  敏,刘  鑫,崔  岩,刘峰斌,焦志伟,刘  园(98)
 
 
微量Ce对亚快速凝固Al-Zn-Mg-Cu合金组织与性能的影响
----------------------------------------------------------------------------------------黄高仁,孙乙萌,张  利,刘玉林(105)
 
 
基于Zc参数的HP耐热合金高温蠕变及持久寿命的预测方法
----------------------------------------------------------------------------------------李会芳,赵  杰,程从前,闵小华,曹铁山,许  军(112)
 
 
升温速率对2219铝合金蠕变时效行为的影响
----------------------------------------------------------------------------------------刘凌峰,湛利华,李文科(117)
 
 
湿热环境下复合材料层板拉-压性能
----------------------------------------------------------------------------------------许  良,费昺强,马少华,回  丽,黄国栋(124)
 
 
综述
 
 
软材料表面形貌调控与应用研究进展
----------------------------------------------------------------------------------------汤  超,陈花玲,李  博,刘学婧(131)
 
 
钙钛矿太阳能电池材料的研究进展
----------------------------------------------------------------------------------------邱  婷,苗晓亮,宋文佳,楼   冬,张树芳(142)
 
 
CONTENTS
 
LITHIUM ION BATTERY COLUMN
 
 
PPESK/PVDF Lithium-ion Battery Composite Separators Fabricated by Combination of Electrospinning and Electrospraying Techniques
----------------------------------------------------------------------------------------GONG Wen-zheng, ZHOU Jing-jing, RUAN Shi-lun, SHEN Chang-yu(1)
 
 
Electrochemical Properties of EVOH-SO3Li/PET Lithium Ion Battery Separator via Electrospinning
----------------------------------------------------------------------------------------GONG Gui-fen, WANG Lei, LAN Jian(7)
 
 
3D Printing of Flexible Electrodes Towards Wearable Lithium Ion Battery
----------------------------------------------------------------------------------------WANG Yi-bo, ZHAO Jiu-peng(13)
 
 
 
RESEARCH ARTICLE
 
 
Effect of Spark Plasma Sintering on Microstructure and Properties of TiB2/AlCoCrFeNi Composites
----------------------------------------------------------------------------------------XIAO Dai-hong, LIU Yu, YU Yong-xin, ZHOU Peng-fei, LIU Wen-sheng, MA Yun-zhu(22)
 
 
Influence of Hybrid Fillers on Thermal Conductivity of Nylon-6/Graphene Composites
----------------------------------------------------------------------------------------SONG Na, CUI Si-qi, JIAO De-jin, HOU Xing-shuang, LIU Jian-ying, DING Peng, SHI Li-yi(28)
 
 
Fabrication and Properties of Silica Gel/Calcium Sulfate/Strontium-doped β-tricalcium Phosphate Composite Porous Scaffolds for Bone Tissue Engineering
----------------------------------------------------------------------------------------QIN Xiao-su, HUANG Jie, GUO Hua-chao, YANG Ze-bin, CHEN Qing-hua, YAN Ting-ting(34)
 
 
Preparation and Performance of Resin-based Fe Nanoparticles/Carbon Fibers Microwave Absorbing Composite Plates
----------------------------------------------------------------------------------------ZHOU Yuan-liang, SHAH Syed, ZHANG Li, MUHMMAD Javid, DUAN Yu-ping, DONG Xing-long(41)
 
 
Thermal Neutron Radiation Shielding and Thermal Properties of B4CP/PI Polyimide Composite Films
----------------------------------------------------------------------------------------LI Xiao-min, WU Ju-ying, TANG Chang-yu, YUAN Ping, XING Tao, ZHANG Kai, MEI Jun, HUANG Yu-hong(48)
 
 
Friction Stir Welding-assisted Diffusion Bond of Al/Zn/Mg Lap Joint
----------------------------------------------------------------------------------------JIN Yu-hua, GAN Rui-gen, CHEN-Fei, SHAO Qing-feng, WANG Xi-jing, GUO Ting-biao(55)
 
 
Research on Residual Stress in Copper/Al2O3 Ceramic/Stainless Steel Composite Structure Brazed Joint
----------------------------------------------------------------------------------------LIU Duo, LIU Jing-he, ZHOU Ying-hao, SONG Xiao-guo, NIU Hong-wei, FENG Ji-cai(61)
 
 
Preparation and Wetting Behavior of Lyophobic Surface on Zinc Substrate
----------------------------------------------------------------------------------------HAN Xiang-xiang, YU Si-rong, LI Hao(67)
 
 
Effect of Pulse Width on Microstructure and Hardness of FeSiB Coatings by Laser Cladding
----------------------------------------------------------------------------------------GONG Yu-bing, WANG Shan-lin, LI Hong-xiang, KE Li-ming, CHEN Yu-hua, MA Bin(74)
 
 
Fast Electrodeposition of Amorphous Ni-P/Al2O3 Composite Coatings Deposited by Bi-directional Pulse
----------------------------------------------------------------------------------------PENG Qiu-yan, FEI Jing-yin, CHEN Ju-tian, ZHAO Fei-fan, FENG Xu(81)
 
 
Corrosion Resistance Behavior and Mechanism of Zn-Al-Mg-RE Coating in Seawater with SRB
----------------------------------------------------------------------------------------LONG Wei-yang, WU Yu-ping, GAO Wen-wen, HONG Sheng(91)
 
 
Effect of Rare Earth Element on Microstructure and Properties of in situ Synthesized TiB2/Al Composites
----------------------------------------------------------------------------------------QU Min, LIU Xin, CUI Yan, LIU Feng-bin, JIAO Zhi-wei, LIU Yuan(98)
 
 
Effect of Trace Ce on Microstructure and Properties of Near-rapidly Solidified Al-Zn-Mg-Cu Alloys
----------------------------------------------------------------------------------------HUANG Gao-ren, SUN Yi-meng, ZHANG Li, LIU Yu-lin(105)
 
 
Prediction of High Temperature Creep Deformation and Rupture Life on HP Heat Resistant Alloy Using Zc Parameter
----------------------------------------------------------------------------------------LI Hui-fang, ZHAO Jie, CHENG Cong-qian, MIN Xiao-hua, CAO Tie-shan, XU Jun(112)
 
 
Effect of Heating Rate on Creep Aging Behavior of 2219 Aluminum Alloy
----------------------------------------------------------------------------------------LIU Ling-feng, ZHAN Li-hua, LI Wen-ke(117)
 
Tensile and Compress Property of Composite Laminate in Hygrothermal Environment
----------------------------------------------------------------------------------------XU Liang, FEI Bing-qiang, MA Shao-hua, HUI Li, HUANG Guo-dong(124)
 
 
REVIEW
 
Research Progress in Tunable Surface Morphology in Soft Materials and Applications
----------------------------------------------------------------------------------------TANG Chao, CHEN Hua-ling, LI Bo, LIU Xue-jing(131)
 
 
Research Progress on Materials for Perovskites Solar Cells
----------------------------------------------------------------------------------------QIU Ting, MIAO Xiao-liang, SONG Wen-jia, LOU Dong, ZHANG Shu-fang(142)