| 目次 |
| 综 述 |
|
高熵合金增材制造研究进展 ----------------------------------------------------------------------------------------魏水淼，马 盼，季鹏程，马永超，王 灿，赵 健，于治水(1) |
| 锂离子电池多层复合电极结构研究进展 ----------------------------------------------------------------------------------------高可心，余天玮，权 威，常增花，李国华，王建涛(18) |
| 导电纱线的制备及其在智能可穿戴装置中的应用研究进展 ----------------------------------------------------------------------------------------马珮珮，李 龙，吴 磊(31) |
| 特殊浸润性纳米纤维膜材料在油水分离中的研究进展 ----------------------------------------------------------------------------------------赵 昕，任宝娜，胡苗苗，皮浩弘，张秀芹，吴 晶(43) |
| 研究论文 |
| 籽晶层对氧化锡纳米棒生长质量及其钙钛矿太阳能电池性能的影响 ----------------------------------------------------------------------------------------张 勇，翟光美，郑露露，高领伟，陈 青，任锦涛，郁 军，许并社(55) |
| 固溶时间对半固态挤压成形Al-17Si-4Cu-0.5Mg合金组织及力学性能的影响 ----------------------------------------------------------------------------------------郝建飞，于宝义，罗惠馨，史原脊，李润霞(63) |
| AgCu/泡沫Cu/AgCu复合钎料对ZrB2-SiC/Inconel 600合金钎焊接头组织与性能的影响 ----------------------------------------------------------------------------------------蔡颖军，王 刚，檀财旺，王 秒，赵 禹(72) |
| 耐高温瞬时液相连接无铅钎焊接头的时效稳定性 ----------------------------------------------------------------------------------------李正兵，王 德，胡德安，陈益平，程东海，郭义乐，何 凯，黄 硕，李晓军(82) |
| 烧结保温时间对超粗晶WC-10Co硬质合金微观结构及性能的影响 ----------------------------------------------------------------------------------------于淞百，闵凡路，姚占虎，张建峰(89) |
| 紫铜纤维对汽车摩擦材料性能的影响 ----------------------------------------------------------------------------------------杨 阳，吴 宏，刘伯威，瞿 辉，刘 咏(96) |
| Ni-石墨含量对TC4钛合金表面自润滑耐磨熔覆层组织与摩擦学性能的影响 ----------------------------------------------------------------------------------------张天刚，姚 波，张志强，刘亚楠，薛 鹏(104) |
| 聚硅氮烷/BN耐热复合涂层的制备及性能 ----------------------------------------------------------------------------------------万耀明，李 静，梁 璐，熊 瑜，王 彦(116) |
| 有序PEO/PHB核壳超细纤维的制备及性能 ----------------------------------------------------------------------------------------杜江华，杨婷婷，郭生伟，喻迎春(123) |
| 内埋FBG传感器复合材料加筋板的固化过程及准静态压缩监测 ----------------------------------------------------------------------------------------周玉敬，刘 刚,胡晓兰,任明伟，范广宏(132) |
| 湿热环境对T800碳纤维/环氧树脂基复合材料力学性能的影响 ----------------------------------------------------------------------------------------周 松，贾耀雄，许 良，边钰博，涂宜鸣(138) |
| 热氧老化对三向正交碳/玻璃纤维/双马复合材料力学性能的影响 ----------------------------------------------------------------------------------------龚 亮，薛利利(144) |
| SiO2无溶剂纳米流体粒径和含量对环氧树脂力学和热性能的影响 ----------------------------------------------------------------------------------------王钰登，郑亚萍，宋 珊，姚东东(156) |
| CONTENTS |
| REVIEW |
|
Research progress in high entropy alloys by additive manufacturing ----------------------------------------------------------------------------------------WEI Shui-miao,MA Pan,JI Peng-cheng,MA Yong-chao, WANG Can,ZHAO Jian,YU Zhi-shui(1) |
| Research progress in the structure of multilayer composite electrodes for lithium-ion batteries ----------------------------------------------------------------------------------------GAO Ke-xin，YU Tian-wei，QUAN Wei,CHANG Zeng-hua，LI Guo-hua，WANG Jian-tao(18) |
| Research progress in preparation of conductive yarn and its application in smart wearable devices ----------------------------------------------------------------------------------------MA Pei-pei，LI Long，WU Lei(31) |
| Research progress in special wettable nanofibrous membranes for oil/water separation ----------------------------------------------------------------------------------------ZHAO-Xin,REN Bao-na,HU Miao-miao,PI Hao-hong,ZHANG Xiu-qin,WU-Jing(43) |
| RESEARCH ARTICLE |
| Effect of seed layers on growth of SnO2 nanorods and performance of perovskite solar cells ----------------------------------------------------------------------------------------ZHANG Yong，ZHAI Guang-mei，ZHENG Lu-lu，GAO Ling-wei，CHEN Qing，REN Jin-tao，YU Jun，XU Bing-she(55) |
| Effect of solution time on microstructure and mechanical properties of Al-17Si-4Cu-0.5Mg alloy formed by semisolid squeeze casting ----------------------------------------------------------------------------------------HAO Jian-fei，YU Bao-yi,LUO Hui-xin,SHI Yuan-ji,LI Run-xia(63) |
| Effect of AgCu/Cu foam/AgCu composite filler on microstructure and mechanical properties of ZrB2-SiC/Inconel 600 alloy brazed joints ----------------------------------------------------------------------------------------CAI Ying-jun,WANG Gang,TAN Cai-wang,WANG Miao,ZHAO Yu(72) |
| High temperature resistant aging stability of lead-free solder joints by TLP bonding ----------------------------------------------------------------------------------------LI Zheng-bing,WANG De,HU De-an,CHEN Yi-ping,CHENG Dong-hai, GUO Yi-le,HE Kai,HUANG Shuo,LI Xiao-jun(82) |
| Effect of sintering time on microstructure and properties of extra-coarse-grained WC-10Co cemented carbide ----------------------------------------------------------------------------------------YU Song-bai,MIN Fan-lu,YAO Zhan-hu,ZHANG Jian-feng(89) |
| Effect of copper fiber on performance of automotive friction materials ----------------------------------------------------------------------------------------YANG Yang，WU Hong，LIU Bo-wei，QU Hui，LIU Yong(96) |
| Effect of Ni-graphite content on microstructure and tribological properties of self-lubricating wear-resistant cladding layer on TC4 titanium alloy surface ----------------------------------------------------------------------------------------ZHANG Tian-gang，YAO Bo，ZHANG Zhi-qiang，LIU Ya-nan，XUE Peng(104) |
| Preparation and properties of polysilizane/BN composite thermal-resistant coating ----------------------------------------------------------------------------------------WAN Yao-ming，LI Jing，LIANG Lu，XIONG Yu，WANG Yan(116) |
| Preparation and properties of ordered core(PEO)-shell(PHB) microfiber ----------------------------------------------------------------------------------------DU Jiang-hua,YANG Ting-ting,GUO Sheng-wei,YU Ying-chun(123) |
| Curing process and quasi-static compression monitoring of stiffened composite panels with embedded FBG sensors ----------------------------------------------------------------------------------------ZHOU Yu-jing,LIU Gang,HU Xiao-lan,REN Ming-wei,FAN Guang-hong(132) |
| Effect of hygrothermal environment on mechanical properties of T800 carbon fiber/epoxy resin composites ----------------------------------------------------------------------------------------ZHOU Song，JIA Yao-xiong，XU Liang，BIAN Yu-bo，TU Yi-ming(138) |
| Influence of thermo-oxidative aging on mechanical performance of three-dimensional orthogonal carbon/glass fiber/bismaleimide composites ----------------------------------------------------------------------------------------GONG Liang，XUE Li-li(144) |
| Effect of particle size and content of SiO2 solvent-free nanofluid on mechanical and thermal properties of epoxy resin ----------------------------------------------------------------------------------------WANG Yu-deng，ZHENG Ya-ping，SONG Shan,YAO Dong-dong(156) |