Download PDF

Construction of Spirooxindole Skeleton Through Intramolecular Dieckmann Cyclization

  • Ting Wu ,  
  • Zhiqiang Pan ,  
  • Chengfeng Xia
    •     
Received date: 23 March 2017; Accepted: 30 April 2017; Published online: 8 May 2017
© The Author(s) 2017. This article is an open access publication

Abstract

A highly efficient and direct approach was developed to construct the structurally diverse spirooxindole skeleton, which is an important basic motif in natural products. Both the 3, 3'-pyrrolidonyl spirooxindoles and spiroindolin-2-one δ-lactones were smoothly obtained by the intramolecular Dieckmann cyclization of oxindoles in excellent yield under mild conditions.

Graphical Abstract

 

Keywords

Dieckmann reaction    Cyclization    Spirooxindole    Indole    
Download fulltext PDF

1 Introduction

The spirooxindole ring system is a popular structure in a number of natural products and leading compounds, which possess significant biological and pharmaceutical activities (Fig. 1). Among them, horsfiline 1 was isolated from the leaves of the Malaysian indigenous tree Horsfieldia superba [1]. Corynoxine 2 and corynoxone B 3 are the important tetracyclic 3-spirooxindole alkaloids, which were isolated from the hooks of Uncariae plants, and have shown potential applications in the prevention or treatment of Parkinson's disease [2-4]. Other complex spirooxindoles, such as spirotryprostatin B 4, was produced by Aspergillus fumigatus and found to inhibit mammalian cancer cell [5]. Cyanogramide 5 was derived from the fermentation broth of the marine-derived Actinoalloteichus cyanogriseus WH1-2216-6 and exhibited strong potencies to reverse the P-glycoprotein-mediated multidrug resistance [6].

Fig. 1

Representative natural products with spirooxindole skeleton

The important biological activities and structural complexities of spirooxindole alkaloids have attracted many organic chemists to develop a number of elegant synthetic strategies (Scheme 1). A representative application of the Mannich reaction in complex spirooxindole alkaloid synthesis was documented by Danishefsky in his approach to spirotryprostatin B 4 [7]. The biomimetically oxidative rearrangement of a tetrahydro-β-carboline was reported to construct the tetracyclic 3-spirooxindole skeleton by Martin [8]. The most widely used method for synthesis of structurally complex spirooxindole structure is the 1, 3-dipolar cycloaddition (1, 3-DC) reaction of azomethine ylide with olefin [9-17]. Moreover, Carreira et al. have developed a reliable methodology to access the pyrrolidinyl-spirooxindole structure via a MgI2-mediated ring-expansion reaction of a spiro[cyclopropane-1, 3′′′oxindole] with an aldimine [18]. Other synthetic strategies of the spiro-pyrrolidone-3, 3′-oxoindole frameworks also include Michael cyclization reaction [19-23] and C-selective SnAr reactions [24-26]. Besides, in our previous study, a completely different method has been achieved for the construction of the tetracyclic 3-spirooxindole through a transition-metal-free intramolecular cross-dehydrogenative coupling of pyridinium [27].

Fig. Scheme 1

The general synthetic strategies of spirooxindoles

Although many elegant methods have been developed for the construction of spirooxindole skeletons, strategies that could directly and efficiently obtain the structurally diverse spirooxindoles are still limited. Therefore, searching for new approach for the construction of spirooxindole is still required. As a well-known organic reaction, Dieckmann cyclization was widely used in the preparation of natural products and medicines, but with limited reports on the construction of natural alkaloid skeletons [28-32]. In 2012, Zhang reported that bromoanilides underwent the Dieckmann condensation in the presence of copper (Ⅰ) iodide and LHMDS to give the spirooxindoles [33]. In this work, we have developed a highly efficient and direct method to construct the spirooxindoles skeleton by the intramolecular Dieckmann cyclization.

2 Results and Discussion

The starting 2-oxytryptamines 6 were easily prepared by direct oxidation of the corresponding tryptamine or tryptophol under modified conditions [34, 35]. At the outset, 2-oxytryptamine methoxyl carbamate 6a was employed to screen the construction of spirooxindole by intramolecular Dieckmann cyclization. Unfortunately, no cyclized product was detected under various conditions (Table 1, entries 1-3). We speculated that the Dieckmann cyclization proceeded with the removal of methoxyl group during the reaction. However, the methoxyl group was a very weak leaving group, thus inhibited the cyclization process. To facilitate the cyclization, phenyl carbamate substrate 6b was subjected to the reaction. As a result, the spirooxindole 7 was obtained in acceptable yield when KHMDS was used as base (Table 1, entry 4). Shift the leaving group from phenol to pentafluorophenol afforded the spirooxindole 7 excellent yield. Instead, when trifluoroethanol was used as leaving group, the generation of spirooxindole 7 was among the phenol and pentafluorophenol. We discovered that the best leaving group for the Dieckmann cyclization was p-nitrophenol and almost quantitative yield was achieved (Table 1, entry 7). Changing the base from KHMDS to NaHMDS or LHMDS also afforded excellent yields of cyclization (Table 1, entries 8 and 9). However, other bases, such as LDA, NaH, and t-BuOK, resulted in lower yields. When the weak bases (Et3N or K2CO3) were subjected, no spirooxindole product was generated (Table 1, entries 13 and 14).

Table 1

Optimization of Dieckmann cyclization

EntrySubstrateLGBaseYield (%)a
16aOMeLHMDS0
26aOMeNaH0
36aOMeKHMDS0
46bOPhKHMDS63
56cOC6F5KHMDS95
66dOCH2CF3KHMDS83
76eOPhNO2KHMDSQuant.
86eOPhNO2NaHMDSQuant.
96eOPhNO2LHMDSQuant.
106eOPhNO2LDA73
116eOPhNO2NaH85
126eOPhNO2t-BuOK63
136eOPhNO2Et3N0
146eOPhNO2K2CO30
aIsolated yields by silica gel column

With the established optimal conditions, different p-nitrophenol carbamates were conducted to investigate the scope of Dieckmann cyclization. It was found that the electron-withdrawing substitutions at C-5 position of tryptamine oxindoles gave lower yields (Table 2, compounds 10 and 11). We reasoned that it might be due to the lower reactivities of the tryptamine oxindoles as nucleophile to attack the p-nitrophenol carbamates. When both of the N1 and N-terminal were substituted with different alkyl groups, the Dieckmann cyclization proceeded smoothly with good yields (Table 2, compounds 12-15). Notably, when there was no protecting group at the N1 position of tryptamine oxindole, the cyclization also gave the target product in reasonable yield. This indicated that the C-3 hydrogen was earlier to be deprotonated than the hydrogen of N1. Besides the p-nitrophenol carbamate of tryptamine oxindoles, the p-nitrophenol carbonate of oxytryptophols were also examined for the Dieckmann cyclization. Although the yields were lower than carbamates, the corresponding spiroindolin-2-one δ-lactones 19 and 20 were obtained with acceptable yields.

Table 2

Substrate scope of the Dieckmann cyclization

In conclusion, we have developed a highly efficient and direct strategy for the construction of 3, 3′-pyrrolidonyl spirooxindoles and spiroindolin-2-one δ-lactones under mild conditions. The reactions were achieved through an intramolecular Dieckmann cyclization of oxytrytamine carbamates to provide a series of spirooxindole derivatives in high yield.

3 Experimental Section

3.1 General Procedures for Synthesis of Spirooxindole

KHMDS (0.18 mmol) was added dropwise to a solution of indolin-2-one 6 (0.12 mmol) in anhydrous THF (5 mL) at 0 ℃. After stirring for 30 min, the reaction temperature was allowed to warm to room temperature and continued stirring for additional 2 h. The reaction was quenched by saturated aqueous NH4Cl and extracted by CH2Cl2 (5 mL × 3). The combined organic layers was washed with brine, dried over anhydrous Na2SO4 and concerned. The residue was purified by silica gel column (CH2Cl2/acetone, 2:1) to afford the spirooxindole.

7. White powder (63% yield). 1H NMR (400 MHz, CDCl3) δ: 7.29 (t, J = 7.8 Hz, 1H), 7.14 (d, J = 7.5 Hz 1H), 7.06 (t, J = 7.5 Hz, 1H), 6.86 (d, J = 7.8 Hz, 1H), 3.78 (td, J = 8.8, 6.3 Hz, 1H), 3.59 (td, J = 9.0, 4.6 Hz, 1H), 3.21 (s, 3H), 2.97 (s, 3H), 2.67 (ddd, J = 13.0, 8.3, 4.6 Hz, 1H), 2.38 (ddd, J = 13.3, 8.5, 6.2 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 175.7, 170.5, 144.5, 129.9, 129.0, 123.1, 122.8, 108.6, 57.8, 47.2, 30.5, 29.5, 26.6; HR-ESI-MS (m/z): calcd. for C13H15N2O2 [M + H]+, 231.1128, found 231.1130.

8. White powder (92% yield); 1H NMR (400 MHz, CDCl3) δ: 6.75 (dd, J = 8.4, 2.1 Hz, 1H), 6.69 -6.67 (m, 2H), 3.74-3.68 (m, 4H), 3.50 (td, J = 9.0, 4.5 Hz, 1H), 3.12 (s, 3H), 2.90 (s, 3H), 2.60 (ddd, J = 12.9, 8.2, 4.5 Hz, 1H), 2.45-2.18 (m, 1H). 13C NMR (100 MHz, CDCl3) δ: 174.3, 169.4, 155.3, 136.9, 130.0, 112.1, 109.5, 107.8, 57.1, 54.8, 46.1, 29.5, 28.5, 25.6; HR-ESI-MS (m/z): calcd. for C13H15N2O2 [M+H]+, 261.1234, found 261.1235.

9. White powder (89% yield); 1H NMR (400 MHz, CDCl3) δ: 7.09 (d, J = 7.9 Hz, 1H), 6.96 (s, 1H), 6.73 (d, J = 7.9 Hz, 1H), 3.76 (td, J = 8.7, 6.4 Hz, 1H), 3.57 (td, J = 9.0, 4.6 Hz, 1H), 3.18 (s, 3H), 2.96 (s, 3H), 2.65 (ddd, J = 13.0, 8.3, 4.6 Hz, 1H), 2.39-2.32 (m, 1H), 2.30 (s, 3H); 13C NMR (100 MHz, CDCl3) δ: 175.3, 170.4, 141.8, 132.3, 129.6, 128.9, 123.3, 107.9, 57.5, 46.9, 30.2, 29.2, 26.3, 20.8; HR-ESI-MS (m/z): calcd. for C14H17N2O2 [M+H]+, 245.1285, found 245.1286.

10. White powder (85% yield); 1H NMR (400 MHz, CDCl3) δ: 7.27-7.14 (m, 1H), 7.12 (d, J = 1.6 Hz, 1H), 6.77 (d, J = 8.3 Hz, 1H), 3.79 (dd, J = 15.4, 8.7 Hz, 1H), 3.57 (td, J = 9.1, 4.5 Hz, 1H), 3.19 (s, 3H), 2.97 (s, 3H), 2.67 (ddd, J = 13.0, 8.3, 4.5 Hz, 1H), 2.40-2.33 (m, 1H); 13C NMR (100 MHz, CDCl3) δ: 174.2, 168.8, 142.1, 130.4, 127.9, 127.3, 122.4, 108.4, 56.8, 46.1, 29.5, 28.3, 25.7; HR-ESI-MS (m/z): calcd. for C13H14ClN2O2 [M+H]+, 265.0738, found 265.0738.

11. White powder (81% yield); 1H NMR (400 MHz, CDCl3) δ: 7.08 (dd, J = 8.1, 5.2 Hz, 1H), 6.86-6.69 (m, 1H), 6.60 (dd, J = 8.8, 2.1 Hz, 1H), 3.84-3.72 (m, 1H), 3.56 (td, J = 9.1, 4.3 Hz, 1H), 3.19 (s, 3H), 2.97 (s, 3H), 2.65 (ddd, J = 12.8, 8.2, 4.3 Hz, 1H), 2.36 (ddd, J = 13.3, 8.6, 6.6 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 174.9, 169.1, 162.5 (d, J = 245 Hz), 145.1 (d, J = 11 Hz), 123.5 (d, J = 118 Hz), 122.9, 108.0 (d, J = 23 Hz), 96.5 (d, J = 48 Hz), 56.3, 46.0, 29.5, 28.4, 25.7; HR-ESI-MS (m/z): calcd. for C13H14FN2O2 [M+H]+, 249.1034, found 249.1033.

12. White powder (70% yield); 1H NMR (400 MHz, CDCl3) δ: 7.15 (t, J = 7.8 Hz, 1H), 7.05 (d, J = 7.1 Hz, 1H), 6.95 (t, J = 7.5 Hz, 1H), 6.73 (d, J = 7.8 Hz, 1H), 5.85-5.60 (m, 1H), 5.14 (dd, J = 28.1, 13.8 Hz, 2H), 4.34-4.12 (m, 2H), 3.68 (td, J = 8.7, 6.4 Hz, 1H), 3.48 (td, J = 9.0, 4.6 Hz, 1H), 2.87 (s, 3H), 2.59 (ddd, J = 13.0, 8.3, 4.6 Hz, 1H), 2.30 (ddd, J = 13.3, 8.6, 6.3 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 175.5, 170.4, 143.6, 130.7, 129.9, 128.8, 122.9, 122.8, 117.5, 109.3, 57.8, 47.2, 42.4, 30.5, 29.3; HR-ESI-MS (m/z): calcd. for C15H17N2O2 [M+H]+, 257.1285, found 257.1288.

13. White powder (80% yield); 1H NMR (400 MHz, CDCl3) δ: 7.31-7.10 (m, 5H), 7.10-6.98 (m, 2H), 6.92 (t, J = 7.5 Hz, 1H), 6.68-6.49 (m, 1H), 4.91 (d, J = 16.0 Hz, 1H), 4.73 (d, J = 16.0 Hz, 1H), 3.70 (dd, J = 15.1, 8.8 Hz, 1H), 3.51 (td, J = 9.0, 4.7 Hz, 1H), 2.88 (s, 3H), 2.64 (ddd, J = 13.1, 8.4, 4.7 Hz, 1H), 2.40-2.26 (m, 1H); 13C NMR (100 MHz, CDCl3) δ: 175.9, 170.5, 143.55, 135.3, 130.0, 128.9, 128.8, 127.5, 127.0, 123.0, 122.8, 109.5, 57.8, 47.2, 43.9, 30.5, 29.4; HR-ESI-MS (m/z): calcd. for C19H19N2O2 [M+H]+, 307.1441, found 307.1443.

14. White powder (60% yield); 1H NMR (400 MHz, CDCl3) δ: 7.31 (d, J = 10.3 Hz, 1H), 7.16 (d, J = 7.1 Hz, 1H), 7.07 (t, J = 7.5 Hz, 1H), 6.86 (d, J = 7.8 Hz, 1H), 5.80 (ddt, J = 16.2, 10.3, 5.9 Hz, 1H), 5.44-5.19 (m, 2H), 4.00 (dd, J = 3.8, 1.9 Hz, 2H), 3.84-3.67 (m, 1H), 3.55 (td, J = 9.0, 4.6 Hz, 1H), 3.22 (s, 3H), 2.68 (ddd, J = 12.9, 8.2, 4.5 Hz, 1H), 2.39 (ddd, J = 13.2, 8.5, 6.4 Hz, 1H). 13C NMR (100 MHz, CDCl3) δ: 175.6, 170.3, 144.5, 131.9, 129.8, 129.0, 123.0, 122.7, 118.3, 108.5, 58.0, 46.0, 44.6, 29.5, 26.5; HR-ESI-MS (m/z): calcd. for C15H17N2O2 [M+H]+, 257.1285, found 257.1286.

15. White powder (75% yield); 1H NMR (400 MHz, CDCl3) δ: 7.41-7.27 (m, 6H), 7.18-7.03 (m, 2H), 6.87 (d, J = 7.8 Hz, 1H), 4.64 (d, J = 16.0 Hz, 1H), 4.50 (d, J = 16.0 Hz, 1H), 3.67 (td, J = 8.9, 6.1 Hz, 1H), 3.44 (td, J = 9.0, 4.9 Hz, 1H), 3.24 (s, 3H), 2.66 (ddd, J = 13.2, 8.4, 4.9 Hz, 1H), 2.56-2.24 (m, 1H); 13C NMR (100 MHz, CDCl3) δ: 175.5, 170.68, 144.5, 135.9, 129.9, 129.1, 128.8, 128.1, 127.7, 123.1, 122.7, 108.6, 57.9, 47.4, 44.5, 29.4, 26.6; HR-ESI-MS (m/z): calcd. for C19H19N2O2 [M + H]+, 307.1441, 307.1442.

16. White powder (43% yield); 1H NMR (400 MHz, CDCl3) δ: 8.17 (brs, 1H), 7.20 (t, J = 7.7 Hz, 1H), 7.13 (d, J = 7.3 Hz, 1H), 7.02 (t, J = 7.5 Hz, 1H), 6.84 (d, J = 7.8 Hz, 1H), 3.77 (td, J = 8.9, 6.1 Hz, 1H), 3.60 (td, J = 9.0, 4.8 Hz, 1H), 2.99 (s, 3H), 2.72 (ddd, J = 13.2, 8.4, 4.8 Hz, 1H), 2.56-2.29 (m, 1H); 13C NMR (100 MHz, CDCl3) δ: 177.3, 170.5, 141.6, 130.4, 128.9, 123.1, 122.9, 110.2, 58.2, 47.3, 30.6, 29.4; HR-ESI-MS (m/z): calcd. for C12H12N2O2 [M+H]+, 217.0972, found 217.0974.

17. White powder (58% yield); 1H NMR (400 MHz, CDCl3) δ: 7.37 (t, J = 7.7 Hz, 1H), 7.23 (d, J = 7.3 Hz, 1H), 7.12 (t, J = 7.5 Hz, 1H), 6.90 (d, J = 7.8 Hz, 1H), 4.62 (td, J = 8.5, 5.0 Hz, 1H), 4.62 (td, J = 8.5, 5.0 Hz, 1H), 3.25 (s, 3H), 2.91 (ddd, J = 12.7, 7.4, 5.0 Hz, 1H), 2.67 (dt, J = 13.2, 7.9 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 173.3, 172.9, 144.4, 129.7, 127.7, 123.5, 123.0, 108.9, 66.7, 55.6, 33.5, 26.7; HR-ESI-MS (m/z): calcd. for C12H12NO3 [M+H]+, 218.0812, found 218.0809.

18. White powder (30% yield); 1H NMR (400 MHz, CDCl3) δ: 7.49 (dd, J = 8.3, 1.6 Hz, 1H), 7.34 (d, J = 1.5 Hz, 1H), 6.77 (d, J = 8.3 Hz, 1H), 4.81 (q, J = 7.9 Hz, 1H), 4.60 (td, J = 8.6, 4.7 Hz, 1H), 3.23 (d, J = 8.3 Hz, 3H), 2.89 (ddd, J = 12.5, 7.5, 4.7 Hz, 1H), 2.66 (dt, J = 13.2, 8.1 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 172.7, 172.2, 143.5, 132.6, 129.5, 126.4, 115.9, 110.3, 66.8, 55.6, 33.4, 26.8; HR-ESI-MS (m/z): calcd. for C12H10NBrO3K [M+K]+, 333.9476, found 333.9484.

19. White powder (43% yield); 1H NMR (400 MHz, CDCl3) δ: 6.88 (dd, J = 8.4, 2.2 Hz, 1H), 6.83 (d, J = 2.1 Hz, 1H), 6.80 (d, J = 8.5 Hz, 1H), 4.82 (q, J = 7.9 Hz, 1H), 4.60 (td, J = 8.5, 5.0 Hz, 1H), 3.79 (s, 3H), 3.22 (s, 3H), 2.90 (ddd, J = 12.5, 7.5, 4.7 Hz, 1H), 2.66 (dt, J = 13.2, 8.1 Hz, 1H); 13C NMR (100 MHz, CDCl3) δ: 172.9, 172.9, 156.6, 137.8, 128.8, 113.9, 110.6, 109.3, 66.7, 55.9, 55.9, 33.6, 26.8; HR-ESI-MS (m/z): calcd. for C13H14NO4 [M+H]+, 248.0917, found 248.0916.

Notes

Acknowledgements

This work was financially supported by the Natural Science Foundation of Yunnan Province (2014FA008 and 2015FB167), and the Program for Changjiang Scholars and Innovative Research Team in University (IRT13095).

Compliance with Ethical Standards

Conflict of interest

The authors declare no conflict of interest.

References

  1. 1.
    A. Jossang, P. Jossang, H.A. Hadi, T. Sevenet, B. Bodo, J. Org. Chem. 56, 6527 (1991) CrossRef PubMed Google Scholar
  2. 2.
    K. Wang, X.Y. Zhou, Y.Y. Wang, M.M. Li, Y.S. Li, L.Y. Peng, X. Cheng, Y. Li, Y.P. Wang, Q.S. Zhao, J. Nat. Prod. 74, 12 (2011) CrossRef PubMed Google Scholar
  3. 3.
    J.X. Song, J.H. Lu, L.F. Liu, L.L. Chen, S.S.K. Durairajan, Z. Yue, H.Q. Zhang, M. Li, Autophagy 10, 144 (2014) CrossRef PubMed Google Scholar
  4. 4.
    I. Sakakibara, H. Takahashi, S. Terabayashi, M. Yuzurihara, M. Kubo, A. Ishige, M. Higuchi, Y. Komatsu, M. Okada, M. Maruno, C. Biqiang, H.X. Jiang, Phytomedicine 5, 83 (1998) CrossRef PubMed Google Scholar
  5. 5.
    C.B. Cui, H. Kakeya, H. Osada, Tetrahedron 52, 12651 (1996) CrossRef PubMed Google Scholar
  6. 6.
    P. Fu, F. Kong, X. Li, Y. Wang, W. Zhu, Org. Lett. 16, 3708 (2014) CrossRef PubMed Google Scholar
  7. 7.
    F. von Nussbaum, S.J. Danishefsky, Angew. Chem. Int. Ed. 39, 2175 (2000) CrossRef PubMed Google Scholar
  8. 8.
    A. Deiters, M. Pettersson, S.F. Martin, J. Org. Chem. 71, 6547 (2006) CrossRef PubMed Google Scholar
  9. 9.
    J.N.S. Rao, R. Raghunathan, Tetrahedron Lett. 56, 1539 (2015) CrossRef PubMed Google Scholar
  10. 10.
    J.N.S. Rao, R. Raghunathan, Tetrahedron Lett. 53, 854 (2012) CrossRef PubMed Google Scholar
  11. 11.
    J.N.S. Rao, R. Raghunathan, Tetrahedron Lett. 54, 6568 (2013) CrossRef PubMed Google Scholar
  12. 12.
    A. Awata, T. Arai, Chem. Eur. J. 18, 8278 (2012) PubMed Google Scholar
  13. 13.
    D. Cheng, Y. Ishihara, B. Tan, C.F. Barbas, ACS Catal. 4, 743 (2014) CrossRef PubMed Google Scholar
  14. 14.
    B.M. Trost, N. Cramer, S.M. Silverman, J. Am. Chem. Soc. 129, 12396 (2007) CrossRef PubMed Google Scholar
  15. 15.
    P.R. Sebahar, R.M. Williams, J. Am. Chem. Soc. 122, 5666 (2000) CrossRef PubMed Google Scholar
  16. 16.
    B. Tan, N.R. Candeias, C.F. Barbas, J. Am. Chem. Soc. 133, 4672 (2011) CrossRef PubMed Google Scholar
  17. 17.
    L. Wang, D. Yang, D. Li, X. Liu, Q. Zhao, R. Zhu, B. Zhang, R. Wang, Org. Lett. 17, 4260 (2015) CrossRef PubMed Google Scholar
  18. 18.
    P.B. Alper, C. Meyers, A. Lerchner, D.R. Siegel, E.M. Carreira, Angew. Chem. Int. Ed. 38, 3186 (1999) CrossRef PubMed Google Scholar
  19. 19.
    Y. Cao, X. Jiang, L. Liu, F. Shen, F. Zhang, R. Wang, Angew. Chem. Int. Ed. 50, 9124 (2011) CrossRef PubMed Google Scholar
  20. 20.
    B.D. Cui, J. Zuo, J.Q. Zhao, M.Q. Zhou, Z.J. Wu, X.M. Zhang, W.C. Yuan, J. Org. Chem. 79, 5305 (2014) CrossRef PubMed Google Scholar
  21. 21.
    L. Chen, Z.J. Wu, M.L. Zhang, D.F. Yue, X.M. Zhang, X.Y. Xu, W.C. Yuan, J. Org. Chem. 80, 12668 (2015) CrossRef PubMed Google Scholar
  22. 22.
    X.L. Liu, W.Y. Han, X.M. Zhang, W.C. Yuan, Org. Lett. 15, 1246 (2013) CrossRef PubMed Google Scholar
  23. 23.
    J.Q. Zhao, M.Q. Zhou, Z.J. Wu, Z.H. Wang, D.F. Yue, X.Y. Xu, X.M. Zhang, W.C. Yuan, Org. Lett. 17, 2238 (2015) CrossRef PubMed Google Scholar
  24. 24.
    S. Sen, V.R. Potti, R. Surakanti, Y.L.N. Murthy, R. Pallepogu, Org. Biomol. Chem. 9, 358 (2011) CrossRef PubMed Google Scholar
  25. 25.
    S. Kobbelgaard, M. Bella, K.A. Jørgensen, J. Org. Chem. 71, 4980 (2006) CrossRef PubMed Google Scholar
  26. 26.
    M. Bella, S. Kobbelgaard, K.A. Jørgensen, J. Am. Chem. Soc. 127, 3670 (2005) CrossRef PubMed Google Scholar
  27. 27.
    J. Xu, L.D. Shao, D. Li, X. Deng, Y.C. Liu, Q.S. Zhao, C. Xia, J. Am. Chem. Soc. 136, 17962 (2014) CrossRef PubMed Google Scholar
  28. 28.
    X. Wang, D. Xia, L. Tan, H. Chen, H. Huang, H. Song, Y. Qin, Chem. Eur. J. 21, 14602 (2015) PubMed Google Scholar
  29. 29.
    E.V. Mercado-Marin, R. Sarpong, Chem. Sci. 6, 5048 (2015) CrossRef PubMed Google Scholar
  30. 30.
    J. Peng, D.L.J. Clive, J. Org. Chem. 74, 513 (2009) CrossRef PubMed Google Scholar
  31. 31.
    C.L. Aboussafy, D.L.J. Clive, J. Org. Chem. 77, 5125 (2012) CrossRef PubMed Google Scholar
  32. 32.
    I. Mutule, B. Joo, Z. Medne, T. Kalnins, E. Vedejs, E. Suna, J. Org. Chem. 80, 3058 (2015) CrossRef PubMed Google Scholar
  33. 33.
    Y. Zhou, Y. Xi, J. Zhao, X. Sheng, S. Zhang, H. Zhang, Org. Lett. 14, 3116 (2012) CrossRef PubMed Google Scholar
  34. 34.
    R.B. Labroo, L.A. Cohen, J. Org. Chem. 55, 4901 (1990) CrossRef PubMed Google Scholar
  35. 35.
    W.E. Savige, A. Fontana, Int. J. Pept. Protein Res. 15, 285 (1980) PubMed Google Scholar

Copyright information

© The Author(s) 2017

Open Access

This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.

Authors and Affiliations

    The Key Laboratory of Chemistry for Natural Products of Guizhou Province, Chinese Academy of Sciences, Guiyang 55002, China Key Laboratory of Medicinal Chemistry for Natural Resources, Ministry of Education, School of Chemical Science and Technology, Yunnan University, Kunming 650091, China
  • Add: 132# Lanhei Road, Heilongtan, Kunming 650201, Yunnan, China
  • Fax: +86 871 65223223
  • Tel: +86 871 65223223
  • E-mail: npb@mail.kib.ac.cn
  • 0

Copyright © 2017 Natural Products and Bioprospecting, All Rights Reserved.