材料工程2020年2期目录

目次
 
综 述
 
 
半纤维素基水凝胶制备及应用研究进展
----------------------------------------------------------------------------------------温敬运,邱晓宇,李明飞,彭 锋,边 静,孙润仓(1)
 
 
硫醇保护的银簇制备及其荧光检测应用的进展
----------------------------------------------------------------------------------------毕明刚,张纪梅,郝帅帅,谢博尧(11)
 
 
金属表面制备绿色环保防腐膜技术的研究进展
----------------------------------------------------------------------------------------杜 娟,魏子明,郑世辑,陈亚军,胡雪兰,汪 睿(22)
 
 
研究论文
 
 
基于不同粒径SiO2的疏水薄膜制备及其性能
----------------------------------------------------------------------------------------侯根良,李 浩,毕 松,苏正安,刘朝辉,林阳阳,汤 进(32)
 
 
改进溶液燃烧法制备Fe3+掺杂Bi24O31Cl10及其光催化性能的研究
----------------------------------------------------------------------------------------余 萍,刘施羽,王 敏,付 蕊(38)
 
 
La-Mg-Ni系A5B19超晶格负极材料相结构及电化学性能
----------------------------------------------------------------------------------------许剑轶,张国芳,胡 峰,王瑞芬,寇 勇,张 胤(46)
 
 
Y掺杂Mn3O4/石墨烯复合材料的电化学性能
----------------------------------------------------------------------------------------陈 乐,董丽敏,金鑫鑫,付海洋,李晓约(53)
 
 
锐钛矿型银掺杂二氧化钛紫外光及模拟太阳光光催化性能
----------------------------------------------------------------------------------------朱晓东,王尘茜,雷佳浩,裴玲秀,朱然苒,冯 威,孔清泉(59)
 
 
MgO/Pd底层对CoSiB/Pd多层膜垂直磁各向异性及热稳定性的影响
----------------------------------------------------------------------------------------赵泽军,卢学鹏,刘 帅,息剑峰,李宝河(65)
 
 
混杂比对碳/芳纶纤维混杂纬编双轴向多层衬纱织物增强复合材料力学性能的影响
----------------------------------------------------------------------------------------齐业雄,姜亚明,李嘉禄(71)
 
 
拉应力下碳纳米管增强高分子基复合材料的应力分布
----------------------------------------------------------------------------------------杨 斌,李云龙,王世杰,聂 瑞,王照智(79)
 
 
正应力支配下混合顺序对PA6/HDPE/CNTs体系结构及性能的影响
----------------------------------------------------------------------------------------殷小春,尹有华,成 迪,杨智韬(87)
 
 
无反射层泡沫夹层结构设计及吸波性能研究
----------------------------------------------------------------------------------------马向雨,邢孟达,张耀辉,宫元勋,陈 冲,赵宏杰(94)
 
 
氨基酸/羟基磷灰石复合材料的制备与表征及其在酸蚀牛牙釉质体外再矿化中的应用
----------------------------------------------------------------------------------------刘继涛,钏定泽,杨泽斌,陈希亮,颜廷亭,陈庆华(100)
 
 
TB17钛合金β相区动态再结晶行为及转变机理
----------------------------------------------------------------------------------------朱鸿昌,罗军明,朱知寿(108)
 
 
GH4169合金楔横轧加工过程中动态再结晶及织构演变
----------------------------------------------------------------------------------------甘洪岩,程 明,宋鸿武,陈 岩,张士宏,Vladimir Petrenko(114)
 
 
复杂镍基单晶铸件显微孔洞的形成机理
----------------------------------------------------------------------------------------黄 敏,张 功,王 栋,李 辉,董加胜,楼琅洪(123)
 
 
S32750双相不锈钢相界与晶界特征对其力学性能和耐蚀性能的影响
----------------------------------------------------------------------------------------李昊卿,田玉晶,赵而团,郭 红,方晓英(133)
 
 
7075铝合金脉冲变极性等离子弧焊接头的双级时效行为
----------------------------------------------------------------------------------------李国伟,梁亚红,陈芙蓉,韩永全(140)
 
 
退火处理对激光沉积制造TC4钛合金组织及力学性能影响
----------------------------------------------------------------------------------------钦兰云,何晓娣,李明东,杨 光,高博文(148)
 
 
不同温度下等离子渗氮后TC4钛合金的摩擦磨损性能
----------------------------------------------------------------------------------------元云岗,康嘉杰,岳 文,付志强,朱丽娜,佘丁顺,王成彪(156)
CONTENTS
 
REVIEW
 
 
Research progress in preparation and application of hemicellulose-based hydrogels
----------------------------------------------------------------------------------------WEN Jing-yun,QIU Xiao-yu,LI Ming-fei,PENG Feng,BIAN Jing,SUN Run-cang(1)
 
 
Development of preparation of thiol-protected silver clusters and fluorescence detection applications
----------------------------------------------------------------------------------------BI Ming-gang, ZHANG Ji-mei,HAO Shuai-shuai,XIE Bo-yao(11)
 
 
Research progress in preparation technology of green environmental anticorrosion coating on metal surface
----------------------------------------------------------------------------------------DU Juan,WEI Zi-ming,ZHENG Shi-ji,CHEN Ya-jun,HU Xue-lan,WANG Rui(22)
 
 
RESEARCH ARTICLE
 
 
Preparation and performance of hydrophobic film based on SiO2 with different particle sizes
----------------------------------------------------------------------------------------HOU Gen-liang,LI Hao,BI Song,SU Zheng-an,LIU Zhao-hui,LIN Yang-yang,TANG Jin(32)
 
 
Preparation of Fe3+ doped Bi24O31Cl10 by modified solution combustion method and its photocatalytic properties
----------------------------------------------------------------------------------------YU Ping,LIU Shi-yu,WANG Min,FU Rui(38)
 
 
Phase structure and electrochemical performance for super lattice La-Mg-Ni based A5B19 type negative materials
----------------------------------------------------------------------------------------XU Jian-yi,ZHANG Guo-fang,HU Feng,WANG Rui-fen,KOU Yong,ZHANG Yin(46)
 
 
Electrochemical properties of Y doped Mn3O4/graphene composites
----------------------------------------------------------------------------------------CHEN Le,DONG Li-min,JIN Xin-xin,FU Hai-yang,LI Xiao-yue(53)
 
 
Photocatalytic activity of Ag-doped TiO2 with anatase structure under UV light and simulated sunlight
----------------------------------------------------------------------------------------ZHU Xiao-dong,WANG Chen-xi,LEI Jia-hao,PEI Ling-xiu,ZHU Ran-ran,FENG Wei,KONG Qing-quan(59)
 
 
Effect of MgO/Pd underlayer on perpendicular magnetic anisotropy and thermal stability of CoSiB/Pd multilayers
----------------------------------------------------------------------------------------ZHAO Ze-jun,LU Xue-peng,LIU Shuai,XI Jian-feng,LI Bao-he(65)
 
 
Effect of hybrid ratio on mechanical properties of carbon/aramid hybrid fiber multi-layered biaxial weft knitted fabric reinforced composites
----------------------------------------------------------------------------------------QI Ye-xiong,JIANG Ya-ming,LI Jia-lu(71)
 
 
Stress distribution of carbon nanotube reinforced polymer matrix composites under tensile stress
----------------------------------------------------------------------------------------YANG Bin,LI Yun-long,WANG Shi-jie,NIE Rui,WANG Zhao-zhi(79)
 
 
Microstructure and properties of PA6/HDPE/CNTs blends of different mixing sequences under normal stress dominated flow field
----------------------------------------------------------------------------------------YIN Xiao-chun,YIN You-hua,CHENG Di,YANG Zhi-tao(87)
 
 
Design and electromagnetic wave absorbing properties of foam sandwich structure without reflective layer
----------------------------------------------------------------------------------------MA Xiang-yu,XING Meng-da,ZHANG Yao-hui,GONG Yuan-xun,CHEN Chong,ZHAO Hong-jie(94)
 
 
Synthesis and characterization of amino acids/hydroxyapatite composites for in vitro remi neralization of acid-etched bovine enamel
----------------------------------------------------------------------------------------LIU Ji-tao,CHUAN Ding-ze,YANG Ze-bin,CHEN Xi-liang,YAN Ting-ting,CHEN Qing-hua(100)
 
 
Dynamic recrystallization behavior and transformation mechanism in β-phase region of TB17 titanium alloy
----------------------------------------------------------------------------------------ZHU Hong-chang,LUO Jun-ming,ZHU Zhi-shou(108)
 
 
Dynamic recrystallization and texture evolution of GH4169 alloy during cross wedge rolling
----------------------------------------------------------------------------------------GAN Hong-yan,CHENG Ming,SONG Hong-wu,CHEN Yan,ZHANG Shi-hong,Vladimir Petrenko(114)
 
 
Formation mechanism of microporosity in complex nickel-based single crystal casting
----------------------------------------------------------------------------------------HUANG Min,ZHANG Gong,WANG Dong,LI Hui,DONG Jia-sheng,LOU Lang-hong(123)
 
 
Effect of phase boundary and grain boundary characteristics on mechanical properties and corrosion resistance of S32750 duplex stainless steel
----------------------------------------------------------------------------------------LI Hao-qing,TIAN Yu-jing,ZHAO Er-tuan,GUO Hong,FANG Xiao-ying(133)
 
 
Two-stage aging behavior of pulse variable polarity plasma arc welding joint of 7075 aluminum alloy
----------------------------------------------------------------------------------------LI Guo-wei,LIANG Ya-hong,CHEN Fu-rong,HAN Yong-quan(140)
 
 
Effect of annealing treatment on microstructures and mechanical properties of TC4 titanium alloy manufactured by laser deposition
----------------------------------------------------------------------------------------QIN Lan-yun,HE Xiao-di,LI Ming-dong,YANG Guang,GAO Bo-wen(148)
 
 
Tribological properties of TC4 titanium alloy treated by plasma nitriding at different temperatures
----------------------------------------------------------------------------------------YUAN Yun-gang,KANG Jia-jie,YUE Wen,FU Zhi-qiang,ZHU Li-na,SHE Ding-shun,WANG Cheng-biao(156)