材料工程2018年10期目录

目次
 
综述
 
 
碳化硅陶瓷基复合材料环境障涂层研究进展
----------------------------------------------------------------------------------------刘巧沐,黄顺洲,何爱杰(1)
 
 
光催化降解水体有机污染物的研究进展
----------------------------------------------------------------------------------------周 锋,任向红,刘建友,刘 嫔(9)
 
 
零维、一维和二维ZnO纳米材料的应用研究进展
----------------------------------------------------------------------------------------杨 丰,王 飞,贾若飞,杨丽丽,杨 慧,李 岚(20)
研究论文
 
 
单分散铁基Fe60Ni7.5Mo7.5P10C10B5金属玻璃球形粒子的制备及评价
----------------------------------------------------------------------------------------董 伟,李文畅,许富民,韩 阳,张 伟(30)
 
 
钛合金叶片燃烧后冷却过程的三维热流耦合数值模拟
----------------------------------------------------------------------------------------梁贤烨,弭光宝,李培杰,曹京霞,黄 旭(37)
 
 
粉末冶金Ti-14Mo-2.1Ta-0.9Nb-7Zr合金热变形行为
----------------------------------------------------------------------------------------马 琳,李 伟,白娇娇,赵丰停(47)
 
 
6082铝合金搅拌摩擦焊焊接过程中晶粒取向演化
----------------------------------------------------------------------------------------张亮亮,王希靖,刘 骁(55)
 
 
7075-T651铝合金薄壁管件多轴低周疲劳行为及寿命预测
----------------------------------------------------------------------------------------陈亚军,刘辰辰,褚玉龙,宋肖肖(60)
 
 
超声冲击处理MB8镁合金十字接头的表层组织及疲劳性能
----------------------------------------------------------------------------------------何柏林,江明明,于影霞,李 力(70)
 
 
K465高温合金短时超温后的显微组织退化及拉伸性能
----------------------------------------------------------------------------------------郭小童,郑为为,肖程波,郑运荣,冯 强(77)
 
 
单晶镍基合金的层错能及其对蠕变机制的影响
----------------------------------------------------------------------------------------闫化锦,田素贵,朱新杰,于慧臣,舒德龙,张宝帅(87)
 
 
激光熔覆再制造涂层应力超声无损评价
----------------------------------------------------------------------------------------闫晓玲,曹 勇,董世运(96)
 
 
真空室压力对低压等离子喷涂成形钨靶材显微组织及性能的影响
----------------------------------------------------------------------------------------王跃明,唐求豪,闫志巧,王 芬(104)
 
 
碳纳米管/纤维素复合纸为电极的超级电容器性能
----------------------------------------------------------------------------------------陈 玮,孙晓刚,蔡满园,聂艳艳,邱治文,陈 珑(113)
 
 
聚苯醚纳米纤维锂电隔膜的制备
----------------------------------------------------------------------------------------李可峰,尹晓燕(120)
 
 
亚铁盐制备高结晶度MIL-100(Fe)纳米材料及其光降解有机染料性能
----------------------------------------------------------------------------------------刘湘粤,张 宇,王 晨,毛会玲,杜 嬛,程 琥,庄金亮(127)
 
 
树枝状介孔二氧化硅的制备及其负载纳米银的抗菌性
----------------------------------------------------------------------------------------黄连根,郑玉婴(135)
 
 
非均相固化体系对复合材料树脂微观力学均匀性的影响
----------------------------------------------------------------------------------------郭妙才,洪旭辉,李亚锋(142)
 
 
耐高温聚(间二乙炔基苯-甲基氢硅烷-苯基硅烷)树脂的合成及性能
----------------------------------------------------------------------------------------葛 娟,赛力克·达尼拜,周 权,彭峥强,倪礼忠(149)
 
 
低熔点固化剂对环氧树脂性能的影响
----------------------------------------------------------------------------------------任志东,梁晨曦,郝思嘉,邢 悦,田俊鹏,戴圣龙,杨 程(156)
 
 
CONTENTS
 
REVIEW
 
 
Research Progress in Environmental Barrier Coatings of SiC Ceramic Matrix Composites
----------------------------------------------------------------------------------------LIU Qiao-mu, HUANG Shun-zhou, HE Ai-jie(1)
 
 
Development of Photocatalytic Degradation of Organic Pollutants in Water
----------------------------------------------------------------------------------------ZHOU Feng, REN Xiang-hong, LIU Jian-you, LIU Pin(9)
 
 
Application Research and Progress of 0D, 1D and 2D ZnO Nanomaterials
----------------------------------------------------------------------------------------YANG Feng, WANG Fei, JIA Ruo-fei, YANG Li-li, YANG Hui, LI Lan(20)
 
 
REVIEWRESEARCH ARTICLE
 
 
Fabrication and Evaluation of Mono-sized Fe-based Fe60Ni7.5Mo7.5P10C10B5 Metallic Glass Spherical
----------------------------------------------------------------------------------------DONG Wei,LI Wen-chang,XU Fu-min,HAN Yang,ZHANG Wei(30)
 
 
Cooling Process of Titanium Alloy Blades After Combustion Using Three Dimensional Heat Flow Coupling Numerical Simulation
----------------------------------------------------------------------------------------LIANG Xian-ye, MI Guang-bao, LI Pei-jie, CAO Jing-xia, HUANG Xu(37)
 
 
Hot Deformation Behavior of Powder Metallurgy Ti-14Mo-2.1Ta-0.9Nb-7Zr Alloy
----------------------------------------------------------------------------------------MA Lin, LI Wei, BAI Jiao-jiao, ZHAO Feng-ting(47)
 
 
Crystal Orientation Evolution During Friction Stir Welding of 6082 Aluminum Alloys
----------------------------------------------------------------------------------------ZHANG Liang-liang, WANG Xi-jing, LIU Xiao(55)
 
 
Multiaxial Low-cycle Fatigue Behavior and Life Prediction of 7075-T651 Aluminum Alloy Thin-walled Tubular Specimens
----------------------------------------------------------------------------------------CHEN Ya-jun,LIU Chen-chen,CHU Yu-long,SONG Xiao-xiao(60)
 
 
Microstructure and Fatigue Property of MB8 Magnesium Alloy Cross Welded Joints with Ultrasonic Impact
----------------------------------------------------------------------------------------HE Bo-lin, JIANG Ming-ming, YU Ying-xia, LI Li(70)
 
 
Microstructural Degradation and Tensile Properties of K465 Equiaxed-cast Superalloy After Short-time Overheating
----------------------------------------------------------------------------------------GUO Xiao-tong,ZHENG Wei-wei,XIAO Cheng-bo,ZHENG Yun-rong,FENG Qiang(77)
 
 
Stacking Fault Energies of Single Crystal Nickel-based Superalloy and Its Influence on Creep Mechanism
----------------------------------------------------------------------------------------YAN Hua-jin, TIAN Su-gui, ZHU Xin-jie, YU Hui-chen, SHU De-long, ZHANG Bao-shuai(87)
 
 
Stress Measurement of Laser Cladding Remanufacturing Coating with Ultrasonic Nondestructive Evaluation
----------------------------------------------------------------------------------------YAN Xiao-ling, CAO Yong, DONG Shi-yun(96)
 
 
Influence of Vacuum Chamber Pressure on Microstructure and Properties of Tungsten Target Fabricated by Low Pressure Plasma Spraying
----------------------------------------------------------------------------------------WANG Yue-ming,TANG Qiu-hao,YAN Zhi-qiao, WANG Fen(104)
 
 
Carbon Nanotubes/Cellulose Composite Paper as Electrodes for Supercapacitor
----------------------------------------------------------------------------------------CHEN Wei, SUN Xiao-gang, CAI Man-yuan, NIE Yan-yan, QIU Zhi-wen, CHEN Long(113)
 
 
Polyphenylene Oxide-based Nanofiber Separator Prepared by Electrospinning Method for Lithium-ion Batteries
----------------------------------------------------------------------------------------LI Ke-feng,YIN Xiao-yan(120)
 
 
Highly Crystalline MIL-100 (Fe) Nanoparticles Prepared from Ferrous Salts and Applications in Photodegradation of Organic Dyes
----------------------------------------------------------------------------------------LIU Xiang-yue, ZHANG Yu, WANG Chen, MAO Hui-ling, DU Xuan, CHENG Hu, ZHUANG Jin-liang(127)
 
 
Preparation of Dendritic Mesoporous Silica and Its Antibacterial Properties of Loaded Nano Ag
----------------------------------------------------------------------------------------HUANG Lian-gen, ZHENG Yu-ying(135)
 
 
Effect of Heterogeneous Resin Curing Agent on Micro-mechanical Uniformity of Resin Matrix of Composites
----------------------------------------------------------------------------------------GUO Miao-cai,HONG Xu-hui,LI Ya-feng(142)
 
 
Synthesis and Properties of High Temperature Resistant Poly (m-diethynylbenzene-methylsilane- phenylsilane) Resin
----------------------------------------------------------------------------------------GE Juan,SAILIKE Danibai,ZHOU Quan,PENG Zheng-qiang,NI Li-zhong(149)
 
 
Effect of Low-melting-point Curing Agent on Property of Epoxy Resin
----------------------------------------------------------------------------------------REN Zhi-dong, LIANG Chen-xi, HAO Si-jia, XING Yue, TIAN Jun-peng, DAI Sheng-long, YANG Cheng(156)