目次 |
研究论文 |
高柔性隔热软木复合材料的制备与性能 ----------------------------------------------------------------------------------------郭安儒,李 杰,肖德海,刘 畅(1) |
“超材料”结构吸波复合材料技术研究 ----------------------------------------------------------------------------------------礼嵩明,蒋诗才,望咏林,顾涧潇,邢丽英(10) |
电化学处理对碳纤维表面加载碳纳米管的影响机理 ----------------------------------------------------------------------------------------宋 磊,陈纪强,范汶鑫,王成国(15) |
高岭土/聚磷酸铵阻燃硬质聚氨酯-酰亚胺泡沫塑料的制备与性能 ----------------------------------------------------------------------------------------张 琪,刘 娟,桑晓明,闫 莉(23) |
透明聚碳酸酯材料疲劳断裂行为 ----------------------------------------------------------------------------------------张晓雯,吴 南,张 旋,马丽婷,厉 蕾(30) |
镍掺杂锆柱撑钛酸盐的制备、表征与光催化性能 ----------------------------------------------------------------------------------------孙东亚,何丽雯,林碧洲(36) |
太阳能吸收AAO复合氧化膜的制备与性能 ----------------------------------------------------------------------------------------魏红阳,常萌蕾,陈东初,王梅丰,叶秀芳(42) |
纳米磷酸铁包覆锂离子电池正极材料LiNi0.5Co0.2Mn0.3O2的制备及其电化学性能 ----------------------------------------------------------------------------------------董 鹏,张英杰,刘嘉铭,李 雪(49) |
W掺杂二氧化钒的水热晶化机理及其相变性能 ----------------------------------------------------------------------------------------李 尧,卢 怡,曹文斌(58) |
新型复合相变储能材料Na/Paraffin的制备与性能分析 ----------------------------------------------------------------------------------------徐永锋,李 明,罗 熙,余琼粉,王云峰,冷从斌(66) |
Ni-5%RE ----------------------------------------------------------------------------------------张国芳,张羊换,许剑轶,侯忠辉(72) |
铝镁异种金属复合挤压成形及界面微观组织 ----------------------------------------------------------------------------------------乔及森,向阳芷,聂书才,张 涵(78) |
AZ31B镁合金/PRO500超高强度钢TIG熔钎连接界面反应特性及力学性能 ----------------------------------------------------------------------------------------陈建华,张喜燕,任 毅(84) |
2024-T4铝合金光纤激光填丝焊缝成形与组织性能的相关性< ----------------------------------------------------------------------------------------许 飞,陈 俐,何恩光,郭路云(90) |
糊状钎剂浓度对其黏附行为的影响 ----------------------------------------------------------------------------------------杜全斌,龙伟民,路全彬,孙华为,王星星,郭艳红,鲍 丽(96) |
Ce对Al-Zn-Mg-Cu合金亚快速凝固铸造组织的影响 ----------------------------------------------------------------------------------------黄高仁,孙乙萌,张 利,刘玉林(102) |
3%Si电工钢铸坯中柱状晶的形变、再结晶行为及织构演变规律 ----------------------------------------------------------------------------------------邵媛媛,郭 琪(108) |
Y2O3对W-4.9Ni-2.1Fe合金摩擦磨损行为的影响 ----------------------------------------------------------------------------------------张雪辉,周亮亮,李晓闲,张陈增,王 成,章 标,陈 颢,梁彤祥(115) |
高能球磨法制备高性能均一分散CNTs/Al5083复合材料 ----------------------------------------------------------------------------------------郭 鲤,蔡晓兰,李 铮,周 蕾,彭 刚,张文忠,王子阳(122) |
综述 |
高熵合金制备及研究进展 ----------------------------------------------------------------------------------------陈永星,朱 胜,王晓明,杜文博,张 垚(129) |
民用航空材料适航审定 ----------------------------------------------------------------------------------------沈小明,陈 挺,张迎春(139) |
CONTENTS |
RESEARCH ARTICLE |
Preparation and Properties of Insulation Flexible Cork Composites ----------------------------------------------------------------------------------------GUO An-ru,LI Jie,XIAO De-hai,LIU Chang(1) |
Study on “Metamaterial” Structural Absorbing Composite Technology ----------------------------------------------------------------------------------------LI Song-ming,JIANG Shi-cai,WANG Yong-lin,GU Jian-xiao,XING Li-ying(10) |
Influencing Mechanism of Electrochemical Treatment on Preparation of CNTs-grafted on Carbon Fibers ----------------------------------------------------------------------------------------SONG Lei,CHEN Ji-qiang,FAN Wen-xin,WANG Cheng-guo(15) |
Preparation and Properties of Rigid Polyurethane-imide Foams Flame Retarded by Kaolin/APP ----------------------------------------------------------------------------------------ZHANG Qi,LIU Juan,SANG Xiao-ming,YAN Li(23) |
Fatigue Fracture Behaviors of Transparent Polycarbonate Materials ----------------------------------------------------------------------------------------ZHANG Xiao-wen,WU Nan,ZHANG Xuan,MA Li-ting,LI Lei(30) |
Preparation,Characterization and Photocatalytic Activity of Nickel-doping Hydroxyl-Zr Pillared Titanate ----------------------------------------------------------------------------------------SUN Dong-ya,HE Li-wen,LIN Bi-zhou(36) |
Preparation and Properties of Solar Absorbing AAO Composite Oxide Film Coatings ----------------------------------------------------------------------------------------WEI Hong-yang,CHANG Meng-lei,CHEN Dong-chu,WANG Mei-feng,YE Xiu-fang(42) |
Fabrication and Electrochemical Performance of LiNi0.5Co0.2Mn0.3O2 Coated with Nano FePO4 as Cathode Material for Lithium-ion Batteries ----------------------------------------------------------------------------------------DONG Peng,ZHANG Ying-jie,LIU Jia-ming,LI Xue(49) |
Crystallization Mechanism and Phase Transition Properties of W-doped VO2 Synthesized by Hydrothermal Method ----------------------------------------------------------------------------------------LI Yao,LU Yi,CAO Wen-bin(58) |
Preparation and Performance Analysis of Na/Paraffin New-style Composite Phase Change Energy Storage Material ----------------------------------------------------------------------------------------XU Yong-feng,LI Ming,LUO Xi,YU Qiong-fen,WANG Yun-feng,LENG Cong-bin(66) |
Effects of Ni-5%RE ----------------------------------------------------------------------------------------ZHANG Guo-fang,ZHANG Yang-huan,XU Jian-yi,HOU Zhong-hui(72) |
Compound Extrusion Forming and Interface Microstructure of Al/Mg Dissimilar Metal ----------------------------------------------------------------------------------------QIAO Ji-sen,XIANG Yang-zhi,NIE Shu-cai,ZHANG Han(78) |
Interfacial Reaction Characteristics and Mechanical Properties of Welding-brazing Bonding Between AZ31B Magnesium Alloy and PRO500 Ultra-high Strength Steel ----------------------------------------------------------------------------------------CHEN Jian-hua,ZHANG Xi-yan,REN Yi(84) |
Correlation of Weld Appearance with Microstructure and Mechanical Properties of 2024-T4 Aluminum Alloy Welded by Fiber Laser with Filler Wire ----------------------------------------------------------------------------------------XU Fei,CHEN Li,HE En-guang,GUO Lu-yun(90) |
Effect of Paste Flux Concentration on Adhesion Behavior ----------------------------------------------------------------------------------------DU Quan-bin,LONG Wei-min,LU Quan-bin,SUN Hua-wei,WANG Xing-xing,GUO Yan-hong,BAO Li(96) |
Effect of Ce on Casting Structure of Near-rapidly Solidified Al-Zn-Mg-Cu Alloy ----------------------------------------------------------------------------------------HUANG Gao-ren,SUN Yi-meng,ZHANG Li,LIU Yu-lin(102) |
Behaviors of Deformation,Recrystallization and Textures Evolution of Columnar Grains in 3%Si Electrical Steel Slabs ----------------------------------------------------------------------------------------SHAO Yuan-yuan,GUO Qi(108) |
Effect of Y2O3 on Friction and Wear Behavior of W-4.9Ni-2.1Fe Alloy ----------------------------------------------------------------------------------------ZHANG Xue-hui,ZHOU Liang-liang,LI Xiao-xian,ZHANG Chen-zeng,WANG Cheng, ZHANG Biao,CHEN Hao,LIANG Tong-xiang(115) |
CNTs/Al5083 Composites of High-performance Uniform and Dispersion Fabricated by High-energy Ball-milling ----------------------------------------------------------------------------------------GUO Li,CAI Xiao-lan,LI Zheng,ZHOU Lei,PENG Gang,ZHANG Wen-zhong,WANG Zi-yang(122) |
REVIEW |
Progress in Preparation and Research of High Entropy Alloys ----------------------------------------------------------------------------------------CHEN Yong-xing,ZHU Sheng,WANG Xiao-ming,DU Wen-bo,ZHANG Yao(129) |
Airworthiness Certification of Civil Aviation Materials ----------------------------------------------------------------------------------------SHEN Xiao-ming,CHEN Ting,ZHANG Ying-chun(139) |